Kenmore 11020232711 washer Parts

Yes. Your Kenmore top-load washer model 11020232711 uses a drain-pump clean-out style filter that can catch small items and lint in the drain system. We recommend checking it when the washer drains slowly, won’t drain, or you hear coins or debris rattling.

Where the “filter” is on this model

On 11020232711, the filter is part of the drain pump area (not a lint screen at the top of the tub like some older washers). For operating and maintenance basics, see the 11020232711 use & care manual.

How to check and clean it (safe, basic steps)

• Unplug the washer (or switch off power at the breaker).
• Turn off both water faucets.
• Have towels and a shallow pan ready; some water may spill.
• Access the drain pump area and remove debris from the clean-out.
• Reinstall the cap/cover securely before running a test cycle.

If the clean-out cap is damaged or won’t seal, the filter component is typically replaced as part of the pump clean-out assembly, such as the washer drain pump clean-out filter WPW10215093.

Symptoms that point to a clogged filter or drain restriction

• Water drains very slowly or not at all
• Spin won’t start because the tub won’t empty
• Gurgling/humming during drain with little water movement
• Small items (coins, hair pins) missing after a wash

Quick comparison: “filter” types you might hear about

Filter type	Common location	Typical on 11020232711?
Lint screen	Top rim or inside agitator	No
Drain pump clean-out	At/near drain pump	Yes
Inlet screen	Inside water inlet valve ports	Possible (separate from drain filter)

Why it matters

A clogged drain-pump filter can cause long drain times, wet loads, and repeated drain/spin problems. Keeping the clean-out clear helps protect the drain pump and reduces service calls.

Last updated: January 2026

To identify your Kenmore washer model, find the model/serial tag on the washer cabinet and match the model number exactly (for this unit, it’s 11020232711). Common tag locations include under the lid, behind the control panel, or on the cabinet frame.

Where to look on Kenmore model 11020232711

On this Kenmore top-load washer, the model/serial label is typically found in one of these places:

• Under the washer lid, around the tub opening
• On the back of the control panel area
• On the main cabinet near the bottom edge
• On the rear panel of the washer

For diagrams and model-specific identification notes, we recommend checking the 11020232711 use & care manual.

What to write down (so you get the right parts)

When you find the tag, record these details:

• Model number (example: 11020232711)
• Serial number (unique to your washer)
• Brand (Kenmore)
• Any revision digits/letters shown after the model number (if present)

Quick check table

Item	What it tells us	Why it matters
Model number	The exact washer design	Ensures parts fit your washer
Serial number	Production run details	Helps confirm compatible revisions
Type (top-load vs front-load)	Where labels are commonly placed	Speeds up locating the tag

Why it matters

Kenmore model numbers can look similar, but small differences can change the correct replacement parts (like a lid lock, drain pump, or water inlet valve). Using the exact model number helps us match the correct diagrams and parts list the first time.

Last updated: January 2026

A Kenmore washer typically lasts 10 to 15 years in normal household use. For the Kenmore 11020232711 top-load high-efficiency washer, lifespan is most influenced by how it’s installed, how it’s used, and how closely you follow the care steps in the 11020232711 use & care manual.

What we can confirm for model 11020232711

The manual for this model emphasizes practices that help prevent common performance problems over time:

• Use High Efficiency (HE) detergent only
• Run the Clean Washer cycle on a regular schedule
• Load items loosely (do not tightly pack)
• Leave the lid open between uses to help the tub dry
• Inspect and replace inlet hoses periodically

Typical lifespan ranges (what to expect)

These ranges are practical averages across modern washers; heavier use generally shortens service life.

Household usage	Typical lifespan	What tends to show wear first
Light (1 to 3 loads/week)	12 to 15 years	Inlet hoses, lid lock, small seals
Average (4 to 7 loads/week)	10 to 15 years	Suspension, drain components, shifting parts
Heavy (multiple loads/day)	7 to 10 years	Drive system, suspension, electronic controls

Maintenance that helps this washer reach the upper end

• Run Clean Washer about monthly or every 30 cycles (the manual calls for this minimum schedule).
• Use only HE detergent and measure carefully; too much detergent can create excess suds and lead to poor rinsing and operating issues.
• Load clothing in loose heaps around the basket wall; avoid overloading and tightly packing.
• Keep the washer level to reduce vibration and off-balance wear (leveling steps are covered in the 11020232711 installation instructions).
• Replace inlet hoses about every 5 years and check for bulges, kinks, cuts, wear, or leaks.

When a repair may matter most

If the washer won’t drain or leaves loads wet, addressing it early can prevent secondary damage. A common service part in that symptom path is the washer drain pump W10919003.

Why it matters

Knowing the 10 to 15 year average helps you decide whether routine maintenance or a repair is the better value, especially as wear items like hoses, lid locks, and drain components age.

Last updated: January 2026