Can you still get parts for a Kenmore dishwasher?
Yes. We still support Kenmore dishwasher parts, and for Kenmore model 66513843K601 you can typically find common replacement items like a heating element, drain pump, door seal, and drain hose by matching the exact model number to the correct part listing and diagrams in the 66513843K601 owner's manual.
Use the model number 66513843K601 (from the rating label on the tub frame) and match it to the part description and identifier.
- Confirm the full model number and any suffix characters
- Compare the part name to the symptom (leak, no drain, no heat, won’t start)
- Check whether your dishwasher uses a direct-wire or power-cord setup before ordering electrical parts
- If you are replacing hoses, confirm routing and the high-loop requirement under the counter
- Keep your old part until the repair is complete so you can compare ports, terminals, and mounting points
These are frequent fixes for performance, draining, and leaking issues.
| Symptom | Common part to check | Example part for this model |
|---|---|---|
| Dishes not drying, water not heating | Heating circuit | Dishwasher heating element W10518394 |
| Water won’t drain, standing water | Drain system | Dishwasher drain pump WPW10348269 |
| Leaks at the door | Door sealing surface | Dishwasher door seal W10542314 |
| Slow drain or installation replacement | Drain line | Dishwasher drain hose (match length and ends) |
Kenmore dishwashers are built with model-specific variations (wiring, hose routing, seals, and controls). Using the exact model number 66513843K601 prevents ordering a look-alike part that does not fit, leaks, or causes a no-start condition.
From the installation guidance for this dishwasher:
- Route drain and water lines so they do not contact the motor or legs
- Use a high loop for the drain hose and fasten it to the underside of the counter
- Use proper grounding; do not use an extension cord
For installation details and clearances, follow the 66513843K601 installation guide.
Last updated: February 2026
Is it worth repairing a Kenmore dishwasher?
Yes, repairing a Kenmore dishwasher is usually worth it when the problem is a common wear item or a moderate-cost fix, especially if your Kenmore 66513843K601 is under about 10 years old and the tub is in good shape. If the repair involves high-cost electronics or major pump assemblies, replacement can make more sense.
- Age of the dishwasher: under 10 years typically favors repair
- Repair cost vs. replacement: if the repair is under ~50% of the cost of a comparable new dishwasher, repair is the better value
- Type of failure: leaks and drainage issues are often straightforward; control failures can be expensive
- Condition of the tub and door: rust, cracks, or a warped door usually push toward replacement
- How it’s been maintained: regular cleaning and correct loading extend life (see the 66513843K601 owner’s manual)
These are frequent, fixable issues on dishwashers like the Kenmore 66513843K601:
| Symptom | Likely area | Typical value of repair |
|---|---|---|
| Not drying well | Heater circuit, rinse aid use | Often worth it if the unit otherwise runs well |
| Won’t drain | Drain path, drain pump, hose routing | Often worth it because the fix is usually contained |
| Leaking at the door | Door seal | Worth it when the leak is only at the perimeter |
| Poor cleaning | Loading, filters, wash system | Worth it when maintenance restores performance |
Model-matched examples from this model’s parts list include the dishwasher door seal W10542314 and the dishwasher drain pump WPW10348269.
- The dishwasher is 10+ years old and needs a control board or major motor/sump work
- Multiple problems at once (leak plus no-drain plus poor wash)
- The tub is damaged or the door no longer seals consistently
- You are paying for repeated service calls in a short period
A dishwasher repair is a good investment when it restores reliable washing and drying for several more years. The manual’s care and troubleshooting sections (cleaning, drain air gap guidance, and storage/winterizing) help prevent repeat failures and protect the wash system (see the 66513843K601 owner’s manual).
Last updated: February 2026
How do I find the model number on my 66513843K601?
Your Kenmore dishwasher’s model number is printed on the model and serial number label on the dishwasher itself. For model 66513843K601, open the door and look around the inner door area and tub rim for the label; record both the model and serial numbers.
Check these common label locations first (with the door open):
- Along the left or right side of the inner door frame
- On the tub rim near the latch area
- On the top edge of the inner door
- On the side wall of the tub opening
- Near the hinge area on the frame
We recommend recording the full details exactly as shown on the label:
- Complete model number (for example, 66513843K601)
- Serial number
- Purchase date (if available)
This information helps match the correct diagrams and manufacturer-approved parts, and it speeds up troubleshooting and service lookups.
Use this checklist before ordering parts like a heating element, drain pump, or control board:
- Copy every character, including any letters
- Do not use the “665” family prefix alone; use the full model number
- If the label is worn, take a clear photo and zoom in
- Match the model number on the label, not the one on a receipt
| Label item | What it’s used for |
|---|---|
| Model number | Identifies the exact dishwasher version for parts fit |
| Serial number | Identifies production run details |
| Purchase date | Helps with your own records and warranty paperwork |
Kenmore 665-series dishwashers can look similar but use different racks, seals, pumps, and electronic controls. Using the exact model number from the label prevents ordering the wrong part.
For a visual reference and product record section, see the owner's manual.
Last updated: March 2026





