Craftsman 917276882 tractor Parts

For a Craftsman riding tractor like model 917276882, engine replacement typically runs about $600 to $2,500 total (engine plus labor). The biggest cost drivers are the engine itself, whether the replacement is a direct-fit, and the shop labor time.

Typical cost breakdown

• Engine (most of the cost): $300 to $1,800
• Labor: $250 to $900 (commonly 4 to 8 labor hours)
• Shop supplies and incidentals: $25 to $100
• Optional add-ons: battery, belts, blades, fuel filter, spark plug(s)

Cost item	Typical range	What changes the price most
Replacement engine	$300 to $1,800	horsepower, crankshaft size, direct-fit vs. modified install
Labor	$250 to $900	rusted fasteners, wiring condition, time to swap pulleys and linkages
Extra parts	$25 to $250	worn drive belt, damaged wiring, weak battery

What to check before you replace the engine

Many “bad engine” symptoms on a riding mower are caused by starting, fuel, or safety-interlock issues. Our 917276882 manual troubleshooting steps point you to basics like battery condition, wiring, ignition switch, and the starter circuit.

• Confirm the battery is charged and terminals are clean
• Verify the brake pedal is fully depressed and PTO is disengaged
• Inspect wiring connections for looseness or corrosion
• If you hear a click but no crank, test the starter solenoid (a common failure item)
• If it cranks but runs poorly, check fuel quality, fuel filter, and spark plug(s)

Helpful references: 917276882 owner's manual, lawn tractor starter solenoid 582042802

Why it matters

Replacing an engine is one of the highest-cost repairs on a riding mower. A quick diagnosis first can prevent spending engine-level money on a problem caused by a weak battery, faulty solenoid, or stale fuel.

Last updated: February 2026

Replacing the engine on your Craftsman lawn tractor model 917276882 is worth it when the tractor’s deck, transmission, and steering are in solid shape and the total engine swap cost stays well below the cost of replacing the entire tractor. If multiple major systems are worn out, replacement is the better value.

Quick decision checklist

• The mower deck is straight, not rusted through, and cuts evenly after basic leveling
• The transmission drives smoothly (no slipping, no loss of power on hills)
• Steering and front axle are tight enough to track straight
• Electrical system is reliable (battery charges, wiring is not brittle)
• You can complete the swap safely (fuel, wiring, and throttle/choke linkages)

Cost and effort: what to compare

Use this simple comparison to decide where your money goes.

Option	Best when	Typical downside
Replace engine	Chassis and deck are strong; you want more years from the tractor	Labor time, setup, and troubleshooting after install
Repair existing engine	Issue is limited (starter, solenoid, fuel delivery, tune-up items)	Can become a cycle of repeated repairs
Replace tractor	Deck, transmission, and steering all show wear	Higher upfront cost; may need new accessories

Before you commit: rule out common “engine” problems

Many no-start or no-crank complaints are electrical or fuel related.

• Confirm throttle is set between half and full speed (FAST) for starting and operation
• Check battery connections and grounds for corrosion and looseness
• If you hear a click but no crank, test the starting circuit and solenoid
• Replace seasonal maintenance items (spark plug, fuel filter) on schedule
• Keep cooling fins and screens clean to prevent overheating damage

Model-specific operating and maintenance guidance is in the 917276882 owner’s manual.

Parts that often fix the problem for less than an engine

If the engine won’t crank, a starting circuit repair is often the first win.

• Lawn tractor starter solenoid 582042802 (common cause of clicking/no-crank)

Why it matters

An engine swap only pays off when the rest of the tractor is dependable. If the deck drive system, mandrels, or transmission are already near end-of-life, you can spend engine money and still end up with poor cut quality or drive issues.

Last updated: February 2026

Craftsman uses engines from multiple manufacturers depending on the tractor and model year; for the Craftsman lawn tractor model 917276882, the operator’s documentation identifies it as a 26.0 HP, 54-inch mower tractor with a low-emission engine, but it does not call out a single engine brand name in the sections provided. For exact engine make and service details, use the 917276882 owner's manual.

What you can rely on for model 917276882

The most accurate way to identify the engine brand on your specific tractor is to match the engine ID information on the machine to the documentation.

• Check the engine shroud and valve cover area for an engine brand badge (common locations).
• Locate the engine model and type code on the engine label (often near the starter or blower housing).
• Compare those numbers to the engine section in the 917276882 owner's manual.
• Use the tractor model number (917276882) plus the engine model/type when ordering engine-related parts.
• If the tractor cranks slowly or only clicks, test the battery and starting circuit before assuming an engine issue.

Common engine brands used on Craftsman riding tractors

Across Craftsman riding mowers and lawn tractors, the most common engine suppliers typically include:

Engine brand	Where you’ll usually see it	What to look for on the engine label
Briggs & Stratton	Many Craftsman lawn tractors	Model, type, and code numbers
Kohler	Some mid to higher HP tractors	Spec number and serial number
Kawasaki	Some premium configurations	Model and spec code

Why it matters

Engine brand and engine model/type determine the correct tune-up parts (spark plug, air filter, oil filter), service procedures, and troubleshooting steps. Using the engine ID prevents ordering the wrong parts even when the tractor model number is correct.

Helpful DIY guidance

If you are diagnosing a no-start or no-crank condition while trying to identify the engine, follow a starting-system workflow first: riding lawn mower engine clicks but doesnt turn over video.

Last updated: February 2026

The Craftsman lawn tractor model 917276882 uses a low-emission gasoline engine; the operator manual also identifies this tractor as a 26.0 HP model with a 54-inch mower. For the exact engine maker (such as Briggs & Stratton or Kohler), use the engine ID label on your tractor and confirm details in the 917276882 owner's manual.

What we can confirm for model 917276882

These model-specific details come straight from the operator documentation:

• Low-emission engine design (operates differently than older engines)
• Rated as a 26.0 HP lawn tractor
• 54-inch mower deck size
• Electric start
• Automatic transmission

Quick spec snapshot

Spec	Model 917276882
Fuel	Gasoline
Engine rating	26.0 HP
Deck size	54 in.
Starting	Electric start
Drive	Automatic transmission

How to identify the exact engine make and model

The sure match is the engine identification tag on the engine itself.

• Raise the hood and locate the engine label (often on the blower housing or valve cover)
• Write down the engine model, type/spec, and code numbers
• Use those numbers to match tune-up parts (spark plug, air filter, fuel filter) and oil specs
• Keep the numbers with your maintenance records for faster parts lookup later

Why it matters

Correct engine identification prevents ordering the wrong maintenance parts and helps with troubleshooting hard-start or no-crank symptoms, especially when diagnosing the starting circuit.

Related starting-system part (when you hear a click but no crank)

A weak or failed solenoid can cause a click with no starter engagement. For this tractor, see the lawn tractor starter solenoid 582042802.

Last updated: February 2026

A Craftsman “6.75” walk-behind mower does not have one universal model number; “6.75” is an engine power rating used across many different mowers. To get the right model number for parts and manuals, we match the exact number from your mower’s model tag, not the engine label. For reference, Craftsman model 917.377911 is a 21-inch 6.75-hp rotary mower.

Where to find the model number on your mower

Check the mower’s model tag (not the engine shroud). Common locations include:

• Under the rear flap near the bagger opening
• On the rear deck housing behind the engine
• On the side of the deck near a rear wheel
• On the frame near the handle mounts
• Near the height-adjuster bracket

What to write down (so parts match the first time)

Bring these details when looking up parts:

• Full model number (often starts with 917.)
• Product number or stock number (if listed)
• Serial number (helps confirm production run)
• Deck size (for example, 21-inch)
• Engine brand and model (helpful, but secondary)

Quick ID guide: “6.75” vs model number

Item you see	What it means	Used to order parts?
“6.75” on engine cover	Engine power rating	No
“917.xxxxxx” on tag	Mower model number	Yes
Engine model/type code	Engine identification	Sometimes

Why it matters

Parts like blades, belts, wheels, and ignition components vary by deck design and drive system. Using the exact mower model number prevents ordering the wrong parts even when two mowers both say “6.75.” For model-specific specs and identification details on this Craftsman tractor page, use the 917276882 owner's manual.

Last updated: February 2026

Craftsman lawn tractor model 917276882 does not have a single built-in “model year” like a car; the year is typically determined from the tractor’s product identification number (serial/date code) on the unit. Use the date code format shown in the 917276882 owner's manual to identify the year.

How to find the year on your 917276882

Look for the product identification label (often under the seat, on the frame near the rear fender, or near the engine area). Then use the date code on that label.

Common places to check:

• Under the seat pan or seat bracket
• Left or right frame rail
• Rear fender area near the wheel
• Engine shroud area (label may be nearby)

How to read the date code (typical Craftsman format)

Many Craftsman riding mowers use a 6-digit date code that reads as MMDDYY.

Code example	Interprets as	What it tells you
072811	July 28, 2011	Build date (year = 2011)
031514	March 15, 2014	Build date (year = 2014)

Why it matters

Knowing the build date helps us match the correct parts and diagrams for your Craftsman tractor, especially for wear items like belts, blades, and deck hardware that can vary by production run.

Related tip while you are checking the label

If you are ordering deck or drive parts, confirm the exact deck and hardware configuration in the 917276882 owner's manual first; it prevents ordering the wrong pulley, mandrel, or fasteners.

Last updated: February 2026

On a Craftsman lawn tractor like model 917276882, the product date code is typically found on the battery label or case and sometimes on charger labels; it is usually a short numeric code stamped, printed, or engraved on the housing. For model-specific label locations, use the 917276882 owner's manual.

Common places to check first

Look for a sticker, stamped numbers, or an engraved code in these spots:

• Battery: top surface or side of the plastic case near the terminals
• Battery tray area: label on the tractor frame near where the battery sits
• Charger (if applicable): bottom label or back label near the electrical rating plate
• Engine shroud: emissions or engine information label (engine date codes are separate from tractor codes)
• Under the seat or hood: product ID labels on the chassis

What the code usually looks like

Many Craftsman battery and charger date codes are 6 digits and formatted like a date (the exact format varies by supplier).

Item	Where the code is usually located	What you may see
Battery	Top or side of case	6-digit stamped/printed code
Charger	Bottom label	Date code near model/electrical specs
Tractor (chassis)	Frame label under seat/hood	Serial/product label info

Tips for reading and using the date code

• Wipe dirt and corrosion off the battery case so the stamp is visible.
• Use a flashlight and check from multiple angles; engraved codes can be faint.
• Write down the full code exactly as shown before ordering parts.
• If you are tracking a no-start issue, also inspect the battery cables and connections.

Why it matters

The date code helps us identify the age of the battery or charger, which is a common factor in starting problems and charging complaints on riding mowers and tractors.

Last updated: February 2026