Kenmore 11026832694 washer Parts

Your Kenmore washer model number is on the model and serial number plate; for Kenmore model 11026832694, use that exact number when ordering parts or looking up troubleshooting steps. The plate is typically on the washer cabinet (often under the lid on top-load models like this one).

Where to look on Kenmore model 11026832694

Check these common locations first:

• Under the washer lid, around the tub opening on the cabinet rim
• On the back panel of the cabinet
• Near the control console area (on the cabinet, not the removable console trim)
• On a metal plate or durable sticker labeled “Model” and “Serial”

For the exact plate location and how it is referenced in documentation, use the 11026832694 owner’s manual.

What the model number looks like (and what to write down)

Record the information exactly as shown on the plate.

Item to record	Example format	Why it matters
Model number	110.26832694 or 11026832694	Ensures correct Kenmore washer parts match
Serial number	Letters and numbers	Helps confirm production series for some parts
Purchase date	Month/day/year	Useful for service history and maintenance

Quick tips to avoid ordering the wrong part

• Match the full model number character-for-character (no missing digits)
• Use the model number, not the timer knob label or console name
• If the plate is worn, take a clear photo and zoom in to confirm digits
• When symptoms point to a common failure, still confirm by model before buying parts

Why it matters

Kenmore washer parts can vary by series and production run. Using the exact model number (11026832694) keeps you aligned with the correct diagrams and parts such as a lid switch, drain pump, or motor coupling.

Last updated: February 2026

Yes, it’s usually worth repairing a Kenmore washer like model 11026832694 when the fix addresses a clear failure (no drain, no spin, no agitate) and the total repair cost is meaningfully less than replacing the washer. We also recommend checking the troubleshooting guidance in the 11026832694 owner's manual before buying parts.

When repair is the better choice

Repair makes the most sense when the washer’s cabinet and tub are solid and the problem is isolated to a common wear part.

• The washer fills but will not spin or drain (often a lid switch or drain pump issue)
• The motor runs but agitation is weak or intermittent (often an agitator drive issue)
• The washer will not agitate or spin and you hear motor noise (often a coupling issue)
• The washer is out of level and vibrates (installation leveling and leg locknuts matter)
• You want to extend life with a durable mechanical fix instead of replacing the whole unit

Common repairs on this model (parts we see replaced often)

These are typical, high-impact repairs for Kenmore top-load designs like 11026832694:

Symptom	Likely area	Example part for this model
Won’t spin or won’t run with lid closed	Lid safety circuit	Washer lid switch WP3949238
Won’t drain or drains slowly	Drain system	Washer drain pump WP3363394
Motor runs but no agitation/spin	Drive connection	Coupling 285753A
Agitator “ratchets” or won’t move clothes well	Agitator drive	Agitator dog 80040

Quick cost-benefit checklist

Use this to decide fast before you invest time and money:

• Add up parts plus any service labor; compare to the price of a basic replacement washer
• If the failure is a single part (lid switch, pump, coupling), repair is typically a strong value
• If multiple major drive components are failing at once (gear case plus clutch plus basket drive), replacement often makes more sense
• If the washer is shaking, confirm it is level and the front leg nuts are tight (an installation issue can mimic a “bad washer”)
• If you are unsure, diagnose first using the troubleshooting section in the manual before ordering parts

Why it matters

A targeted repair can restore proper wash action, draining, and spinning, and it prevents repeat issues like water left in the tub or clothes coming out too wet. The manual also highlights installation checks (leveling and tightened leg nuts) that directly reduce vibration and wear.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years. For your Kenmore model 11026832694, reaching the high end of that range usually comes down to avoiding overloads, using the right water temperature and detergent, and keeping the drive and drain systems working smoothly (see the 11026832694 owner's manual).

Typical lifespan and what changes it

Most top-load, agitator-style washers like model 11026832694 land in this range because wear items gradually loosen, slip, or leak over time.

Common factors that extend washer life:

• Washing balanced loads (less strain on suspension and drive)
• Using correct water levels and cycle selections
• Keeping hoses and connections tight and leak-free
• Addressing unusual noises early (before secondary damage)

Common factors that shorten washer life:

• Frequent overloading or washing heavy, unbalanced items
• Running with a slow drain (pump strain)
• Ignoring a lid switch that intermittently fails to start/spin
• Continued use after oil leaks or grinding noises from the gear case

Parts that often determine “end of life” on this washer

On model 11026832694, these parts are frequent decision points because they affect agitation, spin, and draining.

Symptom	Likely wear area	Example part for this model
Won’t spin or starts then stops	Safety interlock	Washer lid switch WP3949238
Won’t drain or drains slowly	Drain system	Washer drain pump WP3363394
Agitates poorly or “slips”	Agitator drive	Agitator dog 80040
Loud grinding, oil leak, weak spin	Transmission/drive	Gear case 3360629

Why it matters

Knowing the 10 to 15 year expectation helps you decide whether to repair or replace. If your washer is near the end of that window and needs a major drive repair (like a gear case), comparing repair cost to replacement value usually makes the decision clearer.

Last updated: February 2026