Installation guide
Owner’s manual
Error Codes
Can you still get parts for a Kenmore dishwasher?
Yes. We still support replacement parts for many Kenmore dishwashers, including model 66513472N412, as long as the part is still manufactured and available. The key is matching parts by your exact model number and confirming the correct component in the 66513472N412 Owner's manual.
Use your model number (66513472N412) to match the exact design revision, then narrow it down by the symptom (no heat, not draining, leaking, poor cleaning).
- Confirm the full model number from the tub frame label (inside the door)
- Look up the part by symptom and diagram section (pump, sump, door, rack)
- Compare the part name and ID before ordering
- Replace related wear items together when it prevents repeat failures (for example, seals with a sump)
- Follow safety steps for water and power shutoff listed in the installation guide
These are examples of parts that are often replaced on this model when symptoms match:
| Symptom | Likely system | Example part for this model |
|---|---|---|
| Dishes not drying or water not heating | Heating circuit | Element assembly W10518394 |
| Dishwasher will not drain | Drain system | Dishwasher drain pump W10876537 |
| Not filling or fills slowly | Water supply | Dishwasher water inlet valve W11175771 |
| Poor wash coverage on lower rack | Spray system | Dishwasher spray arm, lower W10849471 |
| Leaks from bottom area | Sump/seals | Dishwasher sump and seal assembly WPW10455268 |
Kenmore dishwashers are built with model-specific variations, so ordering by “Kenmore dishwasher” alone often leads to mismatched mounts, connectors, or fit. Using 66513472N412 plus the manual diagrams helps you get the correct OEM-style replacement the first time.
Last updated: February 2026
Is it worth repairing a Kenmore dishwasher?
Yes, it’s usually worth repairing a Kenmore dishwasher like model 66513472N412 when the problem is a common wear item (drain pump, inlet valve, heater, latch, filter) and the repair cost is clearly less than replacing the dishwasher; repairs are especially cost-effective when the unit is under about 10 years old.
Use this checklist first:
- Age: Under ~10 years typically favors repair; over ~10 years depends on condition and repair cost.
- Repair cost: If parts plus labor approach 50% of replacement cost, replacement often makes more sense.
- Symptom type: Leaks, no-drain, no-fill, poor cleaning, and door-latch issues are often straightforward.
- Tub condition: Rusted or cracked tub usually pushes toward replacement.
- Performance goals: If you want quieter operation or shorter cycles, newer models may be a better value.
These are frequent, fixable issues on dishwashers in this design family:
- Not heating or poor drying: check the heater circuit and consider the element assembly W10518394.
- Won’t drain or leaves water: inspect the drain path and consider the dishwasher drain pump W10876537.
- Won’t fill or fills slowly: verify water supply and consider the dishwasher water inlet valve W11175771.
- Door won’t latch or won’t start: inspect the strike and consider the dishwasher door latch WPW10653840.
- Poor cleaning: clean the filter system and inspect spray arms; the manual notes an Ultra Wash HE filter and heating element as key cleaning components (see the 66513472N412 owner’s manual).
| Situation | Typical outcome | Usually worth repairing? |
|---|---|---|
| Drain or fill problem (pump/valve) | Restores basic operation | Yes |
| Heating/drying problem (heater) | Improves wash temp and drying | Yes |
| Rack/rail/stop issues | Restores smooth rack movement | Yes |
| Multiple major failures at once | Higher total cost | Sometimes |
| Tub damage | Structural, leak risk | No |
A targeted repair keeps your 66513472N412 running safely and efficiently, and it avoids replacing an entire dishwasher for a single failed component. The manual also emphasizes proper operation and maintenance as part of long-term dependable use (see the 66513472N412 owner’s manual).
Last updated: February 2026
How do I find the model number on my 66513472N412?
On Kenmore dishwasher model 66513472N412, the model number is printed on the model and serial number label located on the dishwasher tub area. Open the door and look around the door frame and tub opening for the label.
- Open the dishwasher door fully.
- Check the left and right inner door frame (vertical edges).
- Look along the top edge of the tub opening under the counter.
- Check the inside edge of the door near the latch area.
- Wipe the area clean; labels can be hard to read under residue.
The label typically includes both a model number and a serial number. For parts lookup and diagrams, we use the model number.
| Item on label | Example format | What we use it for |
|---|---|---|
| Model number | 665.1347xxx (or similar) | Matching the correct parts list |
| Serial number | Letters and numbers | Production details, service reference |
Tip: On many Kenmore 665 models, the label may show the model with a dot (example: 665.1347...). Your page model is shown without punctuation as 66513472N412; copy what is on your label exactly.
Kenmore 665-series dishwashers can look similar but use different pumps, filters, racks, and valves. Using the exact model number helps ensure the replacement part fits correctly the first time.
- Check for a second label on the tub opening area.
- Look for your model number on your Use and Care Guide.
- Use the diagrams and identification info in the 66513472N412 owner's manual to confirm where the label is located.
Last updated: March 2026
