Kenmore 66513472N412 dishwasher Parts

Yes. We still support replacement parts for many Kenmore dishwashers, including model 66513472N412, as long as the part is still manufactured and available. The key is matching parts by your exact model number and confirming the correct component in the 66513472N412 Owner's manual.

How to find the right part for your Kenmore dishwasher

Use your model number (66513472N412) to match the exact design revision, then narrow it down by the symptom (no heat, not draining, leaking, poor cleaning).

• Confirm the full model number from the tub frame label (inside the door)
• Look up the part by symptom and diagram section (pump, sump, door, rack)
• Compare the part name and ID before ordering
• Replace related wear items together when it prevents repeat failures (for example, seals with a sump)
• Follow safety steps for water and power shutoff listed in the installation guide

Commonly replaced parts for model 66513472N412

These are examples of parts that are often replaced on this model when symptoms match:

Symptom	Likely system	Example part for this model
Dishes not drying or water not heating	Heating circuit	Element assembly W10518394
Dishwasher will not drain	Drain system	Dishwasher drain pump W10876537
Not filling or fills slowly	Water supply	Dishwasher water inlet valve W11175771
Poor wash coverage on lower rack	Spray system	Dishwasher spray arm, lower W10849471
Leaks from bottom area	Sump/seals	Dishwasher sump and seal assembly WPW10455268

Why it matters

Kenmore dishwashers are built with model-specific variations, so ordering by “Kenmore dishwasher” alone often leads to mismatched mounts, connectors, or fit. Using 66513472N412 plus the manual diagrams helps you get the correct OEM-style replacement the first time.

Last updated: February 2026

Yes, it’s usually worth repairing a Kenmore dishwasher like model 66513472N412 when the problem is a common wear item (drain pump, inlet valve, heater, latch, filter) and the repair cost is clearly less than replacing the dishwasher; repairs are especially cost-effective when the unit is under about 10 years old.

Quick way we decide: repair vs. replace

Use this checklist first:

• Age: Under ~10 years typically favors repair; over ~10 years depends on condition and repair cost.
• Repair cost: If parts plus labor approach 50% of replacement cost, replacement often makes more sense.
• Symptom type: Leaks, no-drain, no-fill, poor cleaning, and door-latch issues are often straightforward.
• Tub condition: Rusted or cracked tub usually pushes toward replacement.
• Performance goals: If you want quieter operation or shorter cycles, newer models may be a better value.

Common repairs that are often “worth it” on 66513472N412

These are frequent, fixable issues on dishwashers in this design family:

• Not heating or poor drying: check the heater circuit and consider the element assembly W10518394.
• Won’t drain or leaves water: inspect the drain path and consider the dishwasher drain pump W10876537.
• Won’t fill or fills slowly: verify water supply and consider the dishwasher water inlet valve W11175771.
• Door won’t latch or won’t start: inspect the strike and consider the dishwasher door latch WPW10653840.
• Poor cleaning: clean the filter system and inspect spray arms; the manual notes an Ultra Wash HE filter and heating element as key cleaning components (see the 66513472N412 owner’s manual).

Cost and impact comparison

Situation	Typical outcome	Usually worth repairing?
Drain or fill problem (pump/valve)	Restores basic operation	Yes
Heating/drying problem (heater)	Improves wash temp and drying	Yes
Rack/rail/stop issues	Restores smooth rack movement	Yes
Multiple major failures at once	Higher total cost	Sometimes
Tub damage	Structural, leak risk	No

Why it matters

A targeted repair keeps your 66513472N412 running safely and efficiently, and it avoids replacing an entire dishwasher for a single failed component. The manual also emphasizes proper operation and maintenance as part of long-term dependable use (see the 66513472N412 owner’s manual).

Last updated: February 2026

On Kenmore dishwasher model 66513472N412, the model number is printed on the model and serial number label located on the dishwasher tub area. Open the door and look around the door frame and tub opening for the label.

Where to look (fast checklist)

• Open the dishwasher door fully.
• Check the left and right inner door frame (vertical edges).
• Look along the top edge of the tub opening under the counter.
• Check the inside edge of the door near the latch area.
• Wipe the area clean; labels can be hard to read under residue.

What the label looks like and what to copy

The label typically includes both a model number and a serial number. For parts lookup and diagrams, we use the model number.

Item on label	Example format	What we use it for
Model number	665.1347xxx (or similar)	Matching the correct parts list
Serial number	Letters and numbers	Production details, service reference

Tip: On many Kenmore 665 models, the label may show the model with a dot (example: 665.1347...). Your page model is shown without punctuation as 66513472N412; copy what is on your label exactly.

Why it matters

Kenmore 665-series dishwashers can look similar but use different pumps, filters, racks, and valves. Using the exact model number helps ensure the replacement part fits correctly the first time.

If the label is missing or unreadable

• Check for a second label on the tub opening area.
• Look for your model number on your Use and Care Guide.
• Use the diagrams and identification info in the 66513472N412 owner's manual to confirm where the label is located.

Last updated: March 2026