Samsung
Washer

Model #WF350ANR/XAA-03 Samsung washer

Here are the diagrams and repair parts for Samsung WF350ANR-XAA-03 washer, as well as links to manuals and error code tables, if available.


There are a couple of ways to find the part or diagram you need:

  • Click a diagram to see the parts shown on that diagram.
  • In the search box below, enter all or part of the part number or the part’s name.

Not all parts are shown on the diagrams—those parts are labeled NI, for “not illustrated”.

We encourage you to save the model to your profile, so it’s easy to access parts and manuals for your appliance whenever you log in.

For DIY troubleshooting advice and repair guides, visit our repair help section.

Save to my profileOwner’s manual

Showing 10 of 180 parts

Washer Bolt

#7-2

Tub-drum Diagram

Washer bolt

Part #DC60-40137A
This item is not returnable
$5.39

In Stock

Washer Drain Pump

#11-1

Frame Diagram

Washer drain pump

Part #DC31-00054D
$53.41

In Stock

Washer Door Boot Spring Clamp

#8-7

Tub-drum Diagram

$8.36

In Stock

Washer Oil Seal

#6-11

Tub-drum Diagram

Washer oil seal

Part #DC62-00223A
$11.91

In Stock

Washer Drive Motor

#2-3

Tub-drum Diagram

Washer drive motor

Part #DC31-00111A
$135.88

In Stock

Washer Motor Rotor Position Sensor

#2-1

Tub-drum Diagram

$46.56

In Stock

Washer Front Outer Tub Assembly

#8-10

Tub-drum Diagram

$163.89

In Stock

Washer Door Lock Switch

#4-2

Frame Diagram

Washer door lock switch

Part #DC34-00024B
$74.10

In Stock

Washer Water-Level Pressure Switch

#4

Tub-drum Diagram

$23.74

In Stock

Washer Drain Hose

#17

Frame Diagram

Washer drain hose

Part #DC97-12534E
$47.69

In Stock

Symptoms common to all washers

Choose a symptom to see related washer repairs.

Main causes: clogged drain hose, house drain clogged, bad drain pump, water-level pressure switch failure, bad control board or timer
Main causes: bad lid switch or door lock, bad timer or electronic control board, wiring failure, bad water inlet valve assembly
Main causes: unbalanced load, loose spanner nut, worn drive block, broken shock absorber or suspension spring, debris in drain pump
Main causes: worn agitator dogs, bad clutch, broken motor coupler, shifter assembly failure, broken door lock, suspension component failure
Main causes: broken lid switch or lid lock, bad pressure switch, broken shifter assembly, faulty control system
Main causes: leaky water inlet valve, faulty water-level pressure switch, bad electronic control board
Main causes: lack of electrical power, wiring failure, bad power cord, electronic control board failure, bad user interface board
Main causes: water heater failure, bad water temperature switch, faulty control board, bad water valve, faulty water temperature sensor
Main causes: no water supply, bad water valves, water-level pressure switch failure, control system failure, bad door lock or lid switch

Articles and videos common to all washers

Use the advice and tips in these articles and videos to get the most out of your washer.

January 13, 2018

Troubleshooting excessive vibration during spin cycle on a washer

By Sears PartsDirect staff

If the washer is a-rockin', we can explain.

October 26, 2016

How to repair broken or damaged wires video

By Sears PartsDirect staff

Learn how to repair broken, frayed or damaged wires in your appliances.

January 18, 2016

How to use a multimeter to test electrical parts video

By Sears PartsDirect staff

Learn how to use a multimeter to check for wiring problems in an appliance that's not working