Craftsman 917272410 lawn tractor Parts

For a Craftsman riding mower like model 917272410, we look up the model number by finding the model and serial tag on the tractor, then using that exact model number (all digits) when searching parts and manuals. The tag is typically on the frame under the seat area.

Check these common locations on Craftsman front-engine lawn tractors:

• On the frame under the seat (lift the seat and look down at the frame rails)
• Under the seat pan or on the underside of the seat
• Near the rear fender area close to the seat mounting points
• On the frame near the engine compartment (less common)

For diagrams and model-specific identification notes, use the 917272410 owner's manual.

Use the model number exactly as shown on the tag (including punctuation if present). For this tractor, the manual lists it as 917.272410, and the parts listing uses 917272410; both refer to the same model.

• Enter the full model number when searching parts
• Match the product type (lawn tractor) and brand (Craftsman)
• Use the model number to confirm deck and drivetrain variations
• Keep the serial number for service and production-date questions

Using the exact Craftsman model number prevents ordering the wrong parts for critical systems like the mower deck, blade drive belt, and steering. Even small model differences can change belt routing, spindle style, or tire size.

Last updated: February 2026

The Craftsman lawn tractor model 917272410 uses an 18.0 HP, single-cylinder, electric-start gas engine paired with a 42-inch mower deck and a 6-speed transaxle. For the exact operating and maintenance specs for this tractor, use the 917272410 owner's manual.

From the model-specific documentation, this Craftsman riding mower is configured as:

• 18.0 HP engine (gas)
• Single-cylinder design
• Electric start
• 42-inch mower deck
• 6-speed transaxle

Knowing the engine type (single-cylinder gas, electric start) helps you buy the right tune-up parts and troubleshoot starting or power issues. For example, the manual notes best performance comes from running at full throttle during mowing, and it includes a troubleshooting chart for loss of power and starting problems.

If you are doing seasonal maintenance, these are common areas to check on a 42-inch Craftsman lawn tractor:

• Keep the underside of the mower deck clear of grass buildup for better cut quality
• Check blade condition if you feel vibration or see uneven cutting
• Replace worn deck drive components if the blades slip or stop under load
• Maintain safe operation practices for slopes and debris

If you are refreshing cutting performance, a common replacement item for this model’s deck system is the blade; see the husqvarna lawn tractor mulching blade, 21-in 532134149 if it matches your deck setup and blade style.

Last updated: February 2026

Craftsman lawn tractor model 917272410 was made during the LT2000-era production run, typically around 2003 to 2006. The exact build year for your specific tractor is identified on the model and serial number plate (commonly under the seat) and is sometimes referenced in the documentation for that serial range in the 917272410 owner's manual.

Use these quick checks to pin down the build year for your specific Craftsman 917272410:

• Lift the seat and look for the model/serial tag on the fender pan or frame area
• Confirm the model reads 917.272410 (sometimes shown with a dot)
• Write down the serial number exactly as shown
• Compare the serial information to the identification guidance in the 917272410 owner's manual
• If decals are missing or unreadable, use the parts diagrams to confirm major assemblies (deck, chassis, transaxle)

The build year helps match the correct revision of parts used during production. Even within the same model number, Craftsman tractors can have running changes to items like the mower deck hardware, belt routing, and safety interlock components.

• Mower deck belt routing and idler setup
• Blade and mandrel (spindle) configurations
• Electrical switches and wiring connectors
• Steering and front axle hardware
• Decal sets and control labels

The documentation for this tractor identifies it as an 18.0 HP, electric start, 42-inch mower deck, 6-speed transaxle lawn tractor.

If you are verifying the deck setup while identifying your tractor, the manual parts list for the 42-inch deck includes a mulching blade such as the husqvarna lawn tractor mulching blade, 21-in 532134149.

Last updated: February 2026