Kenmore 10656236400 side-by-side refrigerator Parts

To tell what Kenmore refrigerator you have, find the model and serial tag on your unit and match the model number to your paperwork or parts list. On Kenmore model 10656236400 side-by-side refrigerators, the tag is commonly inside the fresh food section near the crisper area or behind the lower kickplate (toe grille); confirm the exact location in the 10656236400 owner's manual.

Check these common spots first (use a flashlight and look for a sticker or metal plate):

• Inside the fresh food compartment on a side wall near the crisper drawers
• On the wall behind or just above the lower crisper drawer area
• Behind the lower front kickplate (toe grille) near the floor
• Along the door frame (hinge side) when the refrigerator door is open
• On the back exterior panel (less common, but worth a quick check)

Record these details exactly as shown so you can order the right Kenmore parts (water filter, ice maker, door bins, gaskets) the first time.

• Model number (example: 10656236400)
• Serial number (helps identify production run)
• Type (side-by-side refrigerator)
• Any suffix letters/numbers after the model (do not omit them if present)

Kenmore model numbers determine the exact fit for parts like the refrigerator water filter, ice maker, and door hardware. Even small model variations can change the correct part ID, mounting style, or wiring connections.

Last updated: January 2026

For Kenmore model 10656236400, the model number alone usually does not state the exact cubic-foot capacity. The most reliable way is to look up the specifications in the 10656236400 owner's manual; if you need an estimate, calculate interior volume from measurements and convert cubic inches to cubic feet.

The capacity is typically listed in the specifications section of the 10656236400 owner's manual. This is the best option because it matches your exact side-by-side configuration.

If you want a quick estimate, measure the usable interior space (not the outside cabinet).

• Empty the compartment so you can measure cleanly
• Measure width x depth x height in inches for the refrigerator section
• Repeat for the freezer section
• Multiply each section to get cubic inches
• Add the two totals together
• Divide by 1,728 to convert cubic inches to cubic feet

Kenmore model numbers (including the 106 prefix) are great for identifying the manufacturer family and finding the correct parts, but they are not a dependable “capacity code.” We use the full model number to match the correct documentation and parts list.

Knowing cubic feet helps you compare replacement refrigerators, choose storage organizers that fit, and confirm you are buying the right shelves, bins, and drawers for your Kenmore side-by-side refrigerator.

Last updated: January 2026

The exact overall height, width, and depth for Kenmore side-by-side refrigerator model 10656236400 are listed in the 10656236400 owner's manual. For installation planning, the manual also specifies clearances: allow about 1/2 inch on each side and at the top, and at least 2 inches next to a fixed wall for door swing.

Use the manual specs first, then confirm with a quick tape-measure check at home.

• Measure cabinet width at the widest point (not just the opening)
• Measure height from floor to top of cabinet; include leveling-leg adjustment
• Measure depth two ways: cabinet-only and cabinet plus handles
• Confirm door swing clearance next to walls and cabinets
• Leave room behind the unit for the water line if you have an ice maker

These clearances help airflow and prevent doors from hitting walls.

Using the model-specific dimensions avoids delivery surprises, ensures proper ventilation (better cooling), and prevents dispenser or drawer interference when doors cannot open fully.

Last updated: January 2026