Kenmore 79578272901 refrigerator Parts

A fridge model number is the appliance’s exact identifier (letters and numbers) that tells us the specific design, features, and compatible replacement parts for your Kenmore refrigerator. For Kenmore model 79578272901, using the full model number helps ensure you get the right door switch, ice maker, gasket, and other parts.

We use the model number to match the correct parts diagrams, troubleshooting info, and service procedures.

• Confirms the exact refrigerator configuration (door style, dispenser, ice maker setup)
• Ensures part compatibility (for example, switches, valves, sensors)
• Helps narrow down symptom-based troubleshooting steps
• Speeds up ordering the right replacement part the first time
• Helps identify the correct manual and wiring/diagnostic info

Most refrigerators place the model/serial tag where it stays readable but protected from wear.

• Inside the fresh food compartment on a side wall
• On the ceiling of the fresh food compartment near the light
• On the frame around the door opening (hinge side)
• Behind the crisper drawers on the inner cabinet wall
• On the back exterior panel (less common for daily reference)

For model-specific label location notes and formatting, check the 79578272901 owner's manual.

Kenmore refrigerators often share similar styling across multiple models, but internal components can differ. Entering the full model number (not just “Kenmore 795”) is the most reliable way to avoid ordering the wrong ice maker, water valve, or door gasket.

Last updated: January 2026

To identify your Kenmore refrigerator, we use the model and serial number from the rating label on the unit; for Kenmore model 79578272901, that label is typically inside the fresh food compartment (often on a side wall, near the crisper area, or on the door frame). Use the number exactly as printed.

Check these common locations first (use a flashlight and look for a white or silver sticker/plate):

• Inside the refrigerator compartment on the left or right side wall
• On the ceiling of the fresh food compartment near the light housing
• On the door frame behind the door gasket area
• Near or behind the crisper drawers (side wall or rear wall)
• On the back exterior panel (less common, but worth checking)

For diagrams and model-specific label guidance, use the 79578272901 owner's manual.

Kenmore model numbers help us match the correct parts and troubleshooting info.

• The first 3 digits are the source/manufacturer code (for example, 795 commonly indicates an LG-built Kenmore refrigerator)
• The remaining digits identify the specific design series and features
• The serial number is separate; it helps determine production date and revision details

Using the exact model number prevents ordering the wrong refrigerator parts (like a door switch, water valve, or ice maker) and helps us match the right troubleshooting steps for your Kenmore refrigerator.

Last updated: January 2026

Kenmore refrigerator model 79578272901 typically does not have one single, dedicated “reset” button for the whole refrigerator. The most reliable reset is a power reset (unplugging briefly) or using the control panel’s specific button sequence listed in the 79578272901 owner's manual.

• Power reset: Unplug the refrigerator (or switch off the breaker) for 5 minutes, then restore power.
• Control panel reset: If your model has a display, look for a Lock, Filter Reset, Ice On/Off, or similar key and follow the exact hold-time steps in the manual.
• Ice maker reset (if ice is the issue): Turn the ice maker off for 30 seconds, then back on; allow 24 hours for full ice production recovery.
• After a reset: Confirm temperature settings and give the unit time to stabilize.

A reset is best for clearing minor control glitches, restoring normal operation after a power flicker, or restarting features like the ice maker or dispenser. It will not fix a failed component such as a bad switch, valve, or ice maker assembly.

Resetting the right way prevents unnecessary part replacement and helps you separate a temporary control issue from a true failure in parts like the water inlet valve, door switch, or ice maker.

Last updated: January 2026

Yes. On the Kenmore 79578272901 refrigerator, we can usually replace many non-sealed-system parts ourselves (gaskets, switches, drawers, some ice maker and water parts) with basic tools after unplugging the fridge; sealed-system and compressor work should be handled by a technician.

Many repairs are straightforward once we confirm the correct part and follow the steps in the 79578272901 owner's manual.

DIY-friendly (typical):

• Door switch and light-related parts
• Door gaskets and hinge bushings
• Ice maker assembly swaps (if wiring and mounting are accessible)
• Water inlet valve replacement (after shutting off water)
• Defrost sensor or defrost heater replacement (panel removal required)

Usually pro-only:

• Compressor replacement
• Refrigerant leaks, sealed-system restrictions, brazing/soldering
• Evaporator replacement when it involves sealed-system access

• Unplug the refrigerator (or switch off the breaker).
• Shut off the household water supply if working on the dispenser/ice maker line.
• Protect floors; keep towels ready for water lines and defrost melt.
• Use cut-resistant gloves around sheet metal and evaporator fins.
• Take photos of wire connectors and routing before disconnecting anything.

If the symptom matches, these are examples of model-compatible parts we often use:

DIY repairs can restore cooling, ice production, and door sealing quickly while avoiding repeat failures caused by misdiagnosis. The key is matching the symptom to the correct component and using the right Kenmore 79578272901 replacement part.

Last updated: January 2026