Kenmore 79093019310 electric range Parts

To reset your Kenmore electric range model 79093019310, turn the range off and cut power at the home circuit breaker for 1 full minute, then restore power and set the clock. This clears many control glitches and temporary error conditions (without changing wiring).

• Turn all surface element knobs to OFF.
• If the oven is running, press Cancel/Off.
• Switch the range breaker OFF (or remove the range fuse) for 60 seconds.
• Switch the breaker ON.
• Set the clock and test Bake and a surface element.
• If the display shows an error again, note the exact code before resetting a second time.

A reset restores power, but it does not fix a failed part. These are the most common next checks on an electric range:

• No display or dead range: check the house breaker (double-pole) and power cord connection.
• Oven heats wrong or shuts off: the oven temperature sensor can cause erratic temps.
• One surface element not heating: the element, receptacle, or infinite switch can be the cause.
• Error code returns quickly: the electronic control or a sensor circuit issue is likely.

Resetting clears a “stuck” control state after a power flicker or keypad glitch. If the problem returns immediately, that repeat failure pattern helps pinpoint whether you are dealing with a sensor issue, a surface element control issue, or an oven control problem.

If the range is still dead after resetting the breaker, the issue is often at the power supply connection. The installation instructions for this model explain 3-wire versus 4-wire connections and emphasize keeping terminal block connections tight and not loosening factory-installed nuts; see the installation guide. For terminal block repairs, use the correct replacement hardware such as the universal/multiflex (frigidaire) range terminal block 5303935271.

You can order replacement parts for model 79093019310 from the parts list for this range, or search by model number on Sears PartsDirect.

Last updated: February 2026

Kenmore model numbers tell us who built the appliance and which parts fit. For your Kenmore electric range model 79093019310, the first three digits (790) identify the manufacturer family (commonly tied to Frigidaire-built Kenmore ranges), and the remaining digits narrow down the exact configuration.

Most Kenmore model numbers follow a predictable pattern:

• 3-digit prefix: identifies the manufacturer family (example: 790)
• Remaining digits: identify the base design and feature variations
• The full model number matters: one digit difference can change compatible parts

On Kenmore freestanding electric ranges, the model and serial tag is typically found in one of these spots:

• Along the oven door frame (visible when you open the oven door)
• On the storage drawer frame (pull the drawer out and check the frame)
• On the back panel of the range

For diagrams and labeling notes, check the 79093019310 installation guide.

The prefix helps us match you to the correct parts catalog and wiring design. That matters most for:

• Heating parts (bake element, broil element, radiant surface element)
• Controls (control board, control overlay, surface element control switch)
• Electrical connection parts (terminal block, power cord setup)

After you confirm the full model number, order from the parts list for Kenmore 79093019310, or search by model on Sears PartsDirect. If you are replacing an oven heating part, a common example is the frigidaire range bake element 316225001.

Using the exact model number prevents wrong-part returns and avoids installation issues, especially on electrical and heating components where fit and terminals must match.

Last updated: February 2026

For the Kenmore 79093019310 electric range, the installation information focuses on required clearances and fit, not the oven cavity capacity in cubic feet. This model is a standard 30-inch class range; use the cabinet cutout and clearance dimensions in the installation guide to confirm it fits your space.

When customers ask for oven size, it usually refers to one of these:

• Overall range width (commonly 30 inches for this model class)
• Oven capacity (cubic feet, interior volume)
• Interior oven dimensions (usable width, depth, height)
• Required installation clearances (space around the range)

For installation and fit, the clearances are the most important “size” details to use.

Use these items to verify the range fits safely and correctly:

• Minimum clearance above the cooktop to cabinets (protected vs. unprotected)
• Rear clearance requirements (how close the back can be to the wall)
• Floor leveling and anti-tip bracket space at the rear leg
• Electrical supply location and access
• Cabinet and countertop heat protection requirements

The dimensions in the example you found reference a different Kenmore Elite model and a dual-oven configuration. For Kenmore model numbers that start with 790, small design differences (control panel, door style, storage drawer) can change overall height and depth, so we use the model-specific installation specs.

If the goal is to confirm compatibility for cooking performance or repairs, we match by model number and part design, not by overall dimensions. For example, common oven-heating parts for this model include the frigidaire range bake element 316225001 and the frigidaire range broil element 316203200. You can also search by model number on Sears PartsDirect if you are comparing similar Kenmore 790 ranges.

Last updated: February 2026