Installation guide
Owner’s manual
Error Codes
How to read Kenmore model numbers?
For Kenmore model 10651552103, the model number is the key to getting the right refrigerator parts and service information. We use the full number from the model and serial label (typically inside the fresh food compartment) to match the exact Kenmore side-by-side configuration and its compatible replacement parts.
On Kenmore refrigerators like 10651552103, the manual indicates the model and serial label is located on the inside wall of the refrigerator compartment. Use the complete model number exactly as shown.
- Open the fresh food (refrigerator) door
- Look along the inside side walls near the crisper area or upper wall
- Write down the full model number and serial number
- Keep it with your purchase date for records (helpful for parts and maintenance)
Reference: 10651552103 owner's manual
Kenmore model numbers commonly include a 3-digit prefix that identifies the manufacturer, followed by digits that identify the design series and feature variations. For this refrigerator, the prefix is 106, which is widely used on Kenmore refrigerators built by Whirlpool.
| Example | What it tells us | Why it matters |
|---|---|---|
| 106 | Manufacturer prefix (Whirlpool-built Kenmore) | Helps match the correct parts system |
| 51552103 | Series and configuration details | Narrows down shelves, ice maker, valve, and control parts |
Even a one-digit difference can change which ice maker, water inlet valve, thermostat, or door gasket fits. Using the full model number helps us match parts like:
- Refrigerator inlet valve W10408179 for water supply to the dispenser and ice maker
- Whirlpool refrigerator ice maker assembly 2198597 for ice production issues
- Refrigerator thermostat WP2198202 for temperature control problems
- Refrigerator door cam (black) WP2182179 if the door does not close smoothly
If you are shopping beyond the parts list for this model, search by the full model number on Sears PartsDirect.
Your Kenmore model number is the fastest way to avoid wrong-part returns and fix issues like no ice, warm temperatures, leaks, or door sealing problems on the first repair attempt.
Last updated: February 2026
How to remove drip tray from Kenmore refrigerator?
On Kenmore side-by-side refrigerator model 10651552103, the dispenser drip tray is the small removable tray at the bottom of the ice and water dispenser. It lifts out of the dispenser area so you can carry it to the sink to empty and clean it (the tray has no drain). See the 10651552103 owner's manual for the dispenser tray location and care details.
- Remove any glass or items from the dispenser area.
- Grip the drip tray at the front edge.
- Lift the tray up and out of the dispenser recess.
- Carry it to the sink; empty and wash with mild soap and warm water.
- Dry it, then set it back into the dispenser opening and press down so it sits flat.
A full or mis-seated drip tray usually causes small spills at the dispenser, not puddles on the floor. If you have water on the floor, check these common causes:
- Tray overflowing because it was not emptied regularly
- Ice spilling because the glass is pulled away too soon (hold the container under the chute 2 to 3 seconds after releasing the lever)
- Drips after a filter change due to air in the water lines (normal use typically clears this within 24 to 72 hours)
- A stuck ice cube holding the chute door open
- A slow leak in the water supply circuit; inspect the refrigerator inlet valve W10408179 and the refrigerator water tube 8201597
| Symptom | Most likely area | What to do next |
|---|---|---|
| Water only in dispenser pocket | Drip tray | Remove, empty, clean, reinstall |
| Water drips after filter change | Water lines | Flush water; expect clearing within 24 to 72 hours |
| Ice scatters outside the glass | Dispenser chute timing | Hold glass under chute 2 to 3 seconds longer |
| Puddle under freezer door/front | Water line/valve/tubing | Inspect valve and tubing for seepage |
Keeping the drip tray clean prevents odors and sticky buildup around the dispenser, and catching small spills helps protect the dispenser trim and flooring from repeated moisture.
Last updated: February 2026
How wide is a Kenmore side by side refrigerator?
Most Kenmore side-by-side refrigerators are about 32 to 36 inches wide; your Kenmore 10651552103 is in that typical range. For the exact cabinet width and required clearances for your specific unit, use the measurements and spacing guidance in the owner's manual.
Side-by-side refrigerators commonly fall into these width groups:
- 32 to 33 inches: space-saving, smaller capacity
- 35 to 36 inches: most common full-size width
- 42 inches: extra-wide, higher capacity (less common)
Even if the cabinet fits, you still need room for airflow and door swing. The Kenmore 10651552103 manual calls out these common spacing needs:
- Leave about 1/2 inch on each side and at the top for ventilation
- If installed next to a fixed wall, allow about 2 inches minimum on the hinge side (varies by setup) so the door can swing open
- If the refrigerator has an ice maker, allow extra space at the back for the water line connection
- Measure the opening width at the front and back (walls are not always square)
- Confirm door swing clearance near walls, cabinets, and islands
- Plan for moving clearance (doors may need to come off to pass through tight doorways)
Use a tape measure and capture these numbers:
- Cabinet width: main box, not including handles
- Width with doors: can be slightly wider than the cabinet
- Width with handles: often the widest point
| Measurement | What it tells you | Why it matters |
|---|---|---|
| Cabinet width | Core fit in the opening | Determines if it physically fits |
| Width with handles | Maximum protrusion | Prevents surprises with tight walkways |
| Clearance to wall | Door swing space | Ensures drawers and bins open fully |
A refrigerator that is even 1 inch too wide (or too tight to ventilate) can run hotter, cool poorly, and make doors or drawers hard to open. Planning for both width and clearance helps your Kenmore 10651552103 perform correctly.
If you are ordering replacement parts while you measure, we list model-matched parts for Kenmore 10651552103 on this page, and you can also search by model number on Sears PartsDirect.
Last updated: February 2026
What is the cubic foot of my Kenmore refrigerator model 10651552103?
Your Kenmore side-by-side refrigerator model 10651552103 has a total capacity of 21.9 cubic feet. This is the overall storage volume for both the fresh food compartment and the freezer; usable space can feel slightly lower once shelves, bins, and the ice maker are installed.
We recommend checking the product specifications section in your 10651552103 owner's manual. Capacity is typically listed as total volume (refrigerator plus freezer).
- Total capacity is the combined cubic feet of both compartments.
- Usable space is reduced by shelves, door bins, crisper pans, and the ice storage bin.
- Airflow space matters; overpacking can reduce cooling performance.
- Ice maker and bin can take noticeable freezer room in side-by-side designs.
| Measurement | What it means | What to expect in real use |
|---|---|---|
| 21.9 cu. ft. total | Combined refrigerator + freezer volume | Slightly less usable space after bins and shelves |
| Refrigerator section | Fresh food storage | Most day-to-day items, produce drawers, deli/meat pan |
| Freezer section | Frozen food + ice storage | Narrow shelves; ice bin reduces shelf room |
Knowing the cubic feet helps when you are comparing replacement refrigerators, planning kitchen fit, or troubleshooting temperature issues caused by restricted airflow. If storage feels tight, replacing broken bins and drawers can restore organization and usable space.
If a cracked drawer or missing bin is reducing your storage, we stock common replacements for this model, such as the refrigerator crisper pan WP2188656. You can also find additional parts for model 10651552103 on the parts list for this model, or search by model number on Sears PartsDirect.
Last updated: February 2026
