Kenmore 10658502801 side-by-side refrigerator Parts

On Kenmore side-by-side refrigerator model 10658502801, the water filter sits in the base grille below the freezer door. Press the eject button, pull the filter straight out, move the cap to the new filter, then push the new filter in until it locks. See the owner's manual for the exact steps.

Step-by-step: replace the base grille water filter

• Put a towel under the filter area; some water can spill.
• Press the eject button and pull the filter straight out by the cap.
• Turn the filter cap counterclockwise to remove it from the old filter.
• Remove the protective cover from the new filter O-rings.
• Install the cap on the new filter; align the ridge and arrow, then turn clockwise until it snaps.
• Push the new filter into the base grille opening until fully seated (the eject button pops back out).

Flush the water system after changing the filter

We recommend flushing to clear air and carbon fines.

• Hold the dispenser lever 5 seconds on, then 5 seconds off.
• Repeat until water starts flowing.
• Continue the 5-on/5-off cycle for 2 more minutes.

Task	What you should see	What it means
Insert new filter	Eject button depresses, then pops out	Filter is fully engaged
Dispense water after install	Spurting at first	Air is clearing from the system
After flushing	Steady flow	System is purged

Parts that commonly apply to this job

If the filter or housing is damaged or leaking, these are common replacements for this model:

• Genuine Kenmore refrigerator water filter EDR3RXD1
• Refrigerator water filter housing WPW10121138

Why it matters

A properly installed filter helps maintain water flow to the dispenser and ice maker, reduces leaks at the base grille, and keeps taste and odor performance consistent.

Last updated: February 2026

Yes, for Kenmore side-by-side refrigerator model 10658502801, we can replace many common parts ourselves (bins, shelves, water filter, ice maker, door gasket-related items) using basic hand tools and careful safety steps. For electrical and sealed-system repairs, we use a qualified technician.

What you can usually replace yourself

These repairs are typically DIY-friendly when you follow the safety steps in the owner's manual:

• Water filter and related filter parts
• Ice maker and dispenser door components
• Door bins, rails, shelves, crisper and meat pans
• Door closing hardware and minor alignment adjustments
• Basic control and thermostat access (if you are comfortable with wiring and unplug first)

Safety steps we follow first (important)

The manual for this refrigerator calls out key precautions before servicing.

• Unplug the refrigerator or disconnect power before servicing
• Never use an extension cord; use a grounded 3-prong outlet
• Replace all parts and panels before operating
• Use nonflammable cleaner for cleaning tasks
• Use two or more people to move or install the refrigerator

Common parts for model 10658502801 that we replace at home

If the symptom matches, these model-compatible parts are common DIY replacements:

Symptom	Part to check/replace	Example part for this model
Bad taste/odor, slow dispensing	Water filter	Genuine Kenmore refrigerator water filter EDR3RXD1
No ice, small cubes, intermittent ice	Ice maker	Refrigerator ice maker WPW10190965
Water not dispensing, no fill to ice maker	Water inlet valve	Refrigerator inlet valve W10408179
Drawer cracked or won’t slide right	Pan/drawer	Refrigerator crisper pan WP2188656

When we do not DIY (and why)

Some repairs require specialized tools, refrigerant handling, or advanced electrical diagnosis.

• Sealed-system work (compressor, evaporator, condenser): high skill, specialized equipment
• Persistent tripping breakers or burning smell: electrical hazard risk
• Complex control diagnosis when symptoms do not match a clear failed part

Why it matters

DIY part replacement can restore cooling, ice production, and water dispensing faster and at lower cost, but only when we start with safe power disconnection and choose parts that match model 10658502801.

Last updated: February 2026

The most commonly replaced parts in a refrigerator are the ones that affect sealing, cooling, and water dispensing: door gaskets, ice maker and dispenser parts, water filtration parts, and key temperature-control components. For Kenmore model 10658502801, many frequent replacements are listed in the parts catalog and detailed in the owner's manual.

Commonly replaced parts (and what they do)

• Water filter: improves taste and reduces sediment; replace on schedule to protect the dispenser and ice maker.
• Water inlet valve: controls water flow to the dispenser and ice maker.
• Ice maker: produces ice; failures often show up as no ice or small/hollow cubes.
• Door gaskets and sealing parts: prevent warm air leaks that cause frost and temperature swings.
• Thermostat and defrost sensors: help regulate temperatures and defrost operation.
• Shelves and bins: crack or break from normal loading and cleaning.

Popular replacements for Kenmore 10658502801

These are examples of commonly replaced items that match this model:

Symptom	Part category	Example part for this model
Bad-tasting water, slow dispense	Water filtration	Genuine Kenmore refrigerator water filter EDR3RXD1
No water at dispenser or no ice	Water supply control	Refrigerator inlet valve W10408179
Ice maker not producing ice	Ice maker assembly	Refrigerator ice maker WPW10190965
Drawer cracked or missing	Storage	Refrigerator crisper pan WP2188656
Temperature control issues	Temperature control	Refrigerator thermostat WP2198202
Door not sealing well, moisture/frost	Door sealing	Refrigerator door gasket (match by color and location)

Quick checks before you replace a part

• Confirm the symptom: cooling problem vs. ice and water problem vs. door sealing issue.
• Check for airflow blockage: keep vents clear and avoid overpacking.
• Inspect door closure: a door that does not close squarely can mimic cooling failures.
• Clean and maintain: the manual outlines routine cleaning and care steps.
• Use the correct part for the exact model: 10658502801 parts can vary by revision.

Why it matters

Replacing the right “high-wear” part first (like a water filter, inlet valve, ice maker, or gasket) often restores normal operation faster and helps prevent secondary issues such as leaks, frost buildup, odors, and inconsistent temperatures.

Last updated: February 2026

To identify your Kenmore refrigerator model, we look for the model and serial number label on the cabinet inside the fresh food section (often on a side wall, ceiling, or near the crisper drawers). Once you have the model number, match it exactly when selecting parts and instructions in the owner's manual.

Where to find the model number label

Check these common locations on Kenmore refrigerators:

• Inside the refrigerator compartment on the side wall
• On the ceiling of the fresh food compartment
• Behind or beside the crisper drawers
• Along the door frame when the door is open
• Behind the lower kick plate or toe grille area

How to use the model number (and why exact match matters)

Kenmore model numbers are long and specific. For example, 10658502801 is a Kenmore side-by-side refrigerator model; using the full number helps ensure parts like a water filter, ice maker, or door gasket fit correctly.

What you’re doing	What to use	Why it matters
Ordering replacement parts	Exact model number from the label	Prevents wrong-fit parts and returns
Following setup and care steps	The model’s manual instructions	Ensures correct operation and maintenance
Troubleshooting symptoms	Model-specific guidance first	Speeds up diagnosis and repair

Quick tips to avoid mix-ups

• Write the model number exactly as shown (include all digits)
• Take a clear photo of the label before it wears or fades
• Use the model number, not the serial number, when looking up parts
• If the label is hard to read, clean it gently and use a flashlight

Why it matters

Your Kenmore refrigerator’s model number identifies the exact design version, which affects fit and compatibility for key items like the genuine Kenmore refrigerator water filter EDR3RXD1, the ice maker, and door seals.

Last updated: February 2026