Kenmore 11098573120 washer/dryer Parts

A Kenmore washer typically lasts 10 to 15 years with normal household use. For a Kenmore stacked laundry center like model 11098573120, consistent care (proper loading, good drainage, and timely part replacement) helps you reach the longer end of that range.

• Overloading the tub, which strains the drive system and suspension
• Poor draining (standing water, slow drain), which overworks the pump
• Hard water buildup, which can affect valves and internal seals
• Unbalanced loads, which increase wear on the drive components
• Delayed repairs after early symptoms (noise, leaks, burning smell)

If your washer stops agitating, won’t spin, or won’t drain, these are frequent culprits on many Kenmore direct-drive style washers:

• Use the right water level for the load size
• Wash bulky items in smaller loads to prevent imbalance
• Check pockets to reduce debris that can clog the drain path
• Keep the lid open after use so the tub can dry out
• Address new noises early; small failures often cascade into bigger ones

A washer usually gives warning signs before a major failure. Catching issues early can prevent secondary damage to the gear case, motor, and tub support, which are typically the most expensive repairs.

Last updated: February 2026

To tell how old your Kenmore washer in model 11098573120 is, we use the serial number to decode the manufacturing date. The date code format depends on who built the unit for Kenmore (commonly Whirlpool, LG, or Frigidaire), so the serial prefix is the key.

On most Kenmore stacked laundry centers like 11098573120, the serial tag is typically in one of these spots:

• Inside the washer lid area (around the opening)
• Under the washer lid on the rim
• On the back panel of the laundry center cabinet
• Behind the control console area (less common)

If the tag is worn, wipe it gently and use a flashlight; the serial is usually longer than the model number.

Once you have the serial number, match the first characters to the correct manufacturer format, then read the date code.

• Many Whirlpool-built Kenmore units use a serial pattern where characters indicate year and week of production.
• Some LG-built units use a serial pattern that indicates year and month.
• Frigidaire-built units often use a serial pattern that indicates year and week.

Knowing the manufacture date helps us choose the right replacement parts and troubleshoot correctly, especially for wear items like a washer drive system, drain pump, or agitator components.

If you are diagnosing performance issues on an older unit, these are frequent wear points:

• Agitator dog 80040 (agitator not grabbing or slipping)
• Coupling 285753A (washer won’t agitate or spin)
• Washer drain pump WP3363394 (won’t drain or drains slowly)

Confirm the full model number (11098573120) and the serial number together; Kenmore model families can share similar parts, but serial-based production changes can affect fit.

Last updated: February 2026

The dryer capacity (cubic feet) for Kenmore laundry center model 11098573120 is determined by the exact dryer drum used in your unit. The most reliable way to get the correct number is to identify the drum assembly and match it to the specification for that drum.

Use these checks in order; they work even when the capacity is not printed on the console.

• Confirm the full model number on the appliance ID tag: 11098573120.
• Identify the dryer drum part used in your unit; for this model, see the drum 3391834.
• If your ID tag lists a “Type” or “Stock” number, record it; it helps match the correct configuration.
• Compare your drum and bulkhead style to the parts breakdown to ensure you are looking at the correct dryer section.
• If you are unsure you have the right model number, use how to find your appliance model number (and what it means for parts).

Most stacked laundry center dryers fall into one of these ranges; use this only as a loading guideline until you confirm your exact spec.

Capacity affects drying performance. Loading beyond the drum’s intended volume causes longer dry times, higher heat stress, and faster wear on tumbling components.

• Dryer idler pulley WP691366 (keeps belt tension steady)
• Drive motor 279827 (drives drum rotation)
• Bulkhead 279848 (supports the front of the drum)

Last updated: February 2026

The washer in Kenmore laundry center model 11098573120 is a compact, traditional top-load washer; units in this stacked-laundry-center class are typically around 3.0 to 3.5 cu. ft. For the exact cubic-foot rating, use the capacity listed on the model and serial tag or the product specification sheet for your unit.

Kenmore 110-prefix laundry centers commonly use a smaller top-load washer basket than full-size standalone washers.

• Typical washer capacity: 3.0 to 3.5 cu. ft.
• Wash system: agitator style (common on this platform)
• Best load size: small to medium everyday loads
• Bulky items: wash in smaller batches to keep good turnover
• Overloading: reduces cleaning and rinsing performance

Use these quick checks to get the exact number without guessing:

• Look for a printed capacity line on the model and serial tag (often near the lid opening or inside the cabinet).
• If the tag lists a basket size or tub volume, use that value as the official capacity.
• Compare your washer basket depth and diameter to typical compact top-load baskets if you are estimating.

Capacity affects cleaning, spin-out, and wear. Overloading can strain drive components and reduce agitation, which is often mistaken for a “small capacity” washer.

If agitation is weak or inconsistent, these common wear items can be relevant:

• Agitator dog 80040 (worn dogs can stop the upper agitator from ratcheting)
• Coupling 285753A (a worn coupling can affect agitation and spin)
• Gear case 3360629 (internal wear can reduce agitation and spin power)

Last updated: February 2026