Kenmore 79572039112 refrigerator Parts

A bottom-mount refrigerator like Kenmore model 79572039112 keeps the fresh-food compartment at eye and waist level, so you reach everyday items with less bending. The freezer stays in the lower drawer, which can be more comfortable and helps keep frequently used foods easier to see and organize.

Key advantages you’ll notice day to day

• Less bending for fresh food: produce, drinks, and leftovers are easier to grab.
• Better visibility: shelves are closer to eye level, so items are less likely to get forgotten.
• Freezer drawer organization: baskets and dividers can make frozen items easier to sort.
• More ergonomic for many kitchens: common tasks happen in the upper compartment.
• Often better fresh-food capacity: many bottom-mount designs prioritize refrigerator space.

Bottom-mount vs top-freezer: quick comparison

Feature	Bottom-mount refrigerator	Top-freezer refrigerator
Most-used section height	Refrigerator is higher	Freezer is higher
Bending for daily items	Less	More
Freezer access	Drawer pull-out	Swing door
Best for	Fresh-food heavy households	Frozen-food heavy households

Why it matters

Most households open the refrigerator section far more than the freezer. Putting fresh food up top reduces strain on your back and knees and makes it easier to keep food visible, which can cut down on waste.

Related tips for this Kenmore refrigerator

If your bottom-mount has a water dispenser or ice maker, keeping the water system maintained helps performance. Replacing the filter on schedule and following the model-specific steps in the 79572039112 owner's manual helps prevent slow dispensing and off-tastes.

Last updated: February 2026

Most Kenmore refrigerators last about 13 years on average with normal household use and basic maintenance. For your Kenmore 79572039112 bottom-mount refrigerator, keeping airflow clear, seals tight, and the water system maintained helps you reach that typical lifespan; see the owner's manual for model-specific care steps.

Typical lifespan and what affects it

A refrigerator’s life depends more on operating conditions than brand name alone.

• Heat and ventilation: tight cabinets and dusty coils make the compressor work harder
• Door seal condition: air leaks cause longer run times and frost issues
• Power quality: frequent outages or surges stress the control board and compressor
• Ice maker and dispenser use: heavy use increases wear on valves, switches, and motors
• Water quality: sediment can shorten the life of the inlet valve and ice maker

Maintenance that extends life (high impact)

These are the most effective, low-cost habits for a bottom-mount refrigerator:

• Vacuum dust from the condenser area regularly
• Keep food from blocking interior air vents
• Clean and inspect door gaskets; keep them free of sticky residue
• Replace the water filter on schedule; a clogged filter can reduce flow and strain the water system
• Level the refrigerator so doors close fully and consistently

Quick reference: lifespan expectations

Item	Typical expectation	What you’ll notice when it’s wearing out
Refrigerator (overall)	~13 years	warmer temps, longer run times, more noise
Water filter	6 months	slow dispenser flow, poor taste/odor
Door gaskets	5 to 10 years	condensation, frost, doors not sealing

If you need a replacement filter for this model, we list the genuine Kenmore refrigerator water filter 9690 AGF80300801 for Kenmore 79572039112.

Why it matters

Knowing the average lifespan helps you decide whether to repair or refresh key wear items (like a water filter or door seal) before they trigger bigger problems such as temperature swings, ice maker failures, or excessive compressor run time.

Last updated: February 2026

A bottom leak on your Kenmore 79572039112 bottom-mount refrigerator is usually caused by defrost water not draining correctly (clogged drain path or drain tube) or by a water supply leak to the dispenser or ice maker. Start by checking for ice or debris in the drain area and inspecting the water line connections.

Most common causes (and what to check first)

• Clogged defrost drain: Water backs up, freezes, then spills into the fresh food section and down to the floor.
• Drain tube issue: A loose, kinked, or blocked drain tube can dump water under the cabinet; see refrigerator drain tube 5251JA3003D.
• Water filter or housing leak: A mis-seated filter or damaged O-rings can drip and run down; confirm the filter is fully locked in place.
• Water inlet valve seep: A slow leak at the valve can pool underneath; inspect fittings and tubing.
• Cracked or shifted drain pan: Defrost water misses the pan or leaks out of it.

Quick troubleshooting steps

1. Unplug the refrigerator and pull it out far enough to inspect underneath.
2. Check the freezer floor and rear panel for a sheet of ice (a strong sign of a clogged defrost drain).
3. Inspect the drain pan for cracks and make sure it is seated correctly.
4. Look for wet tubing or mineral tracks at the back near the water line; pay attention to the line feeding the door.
5. Reseat the water filter and run a few cups of water to see if dripping starts.

Parts that commonly solve bottom leaks

Leak source	What you may notice	Related part on this model
Defrost drain path	Water after defrost cycle, ice buildup	Refrigerator drain tube 5251JA3003D
Filter area	Drips near filter compartment	Genuine Kenmore refrigerator water filter 9690 AGF80300801
Need water but no filter installed	Dispenser/ice maker testing	Refrigerator water filter bypass ABN73019101
Supply line to door	Wet line, slow seep	Refrigerator water tubing MJU62070602
Valve/fittings	Water pooling near rear bottom	Lg refrigerator water inlet valve AJU72992601

Why it matters

Leaks from the bottom can lead to floor damage and can also indicate a defrost drain problem that may eventually cause ice buildup and airflow restrictions. Fixing the drain or water supply leak early helps keep temperatures stable and prevents repeat puddles.

Helpful reference

For model-specific access panels, drain locations, and safety notes, follow the steps in the owner's manual.

Last updated: February 2026

The most common problems we see on Kenmore refrigerators like model 79572039112 are cooling issues, water and ice dispenser failures, leaks, and door or light problems. Many of these trace back to airflow restrictions, a failed switch or valve, or normal wear parts that are straightforward to diagnose.

Most common symptoms and what usually causes them

• Not cooling or warm fridge/freezer: dirty condenser coil, failed compressor start components, control board issues, or poor airflow
• Ice maker not making ice: water supply problem, inlet valve failure, ice maker assembly failure, or a dispenser door issue letting warm air in
• Water dispenser slow or not dispensing: clogged water filter, kinked tubing, or a weak inlet valve
• Water leaking inside or under the fridge: clogged/iced drain tube, loose water line, or defrost drainage problems
• Lights not working or door alarm issues: failed door switch or LED module
• Dispenser not responding: dispenser switch failure or dispenser mechanism problems

Quick checks we recommend first (fast, no parts)

1. Confirm temperatures: 37°F fresh food, 0°F freezer.
2. Make sure vents inside the compartments are not blocked by food packages.
3. Clean dust from the condenser area; restricted airflow causes poor cooling.
4. If water or ice is weak, replace the filter and purge air from the line.
5. If you have a leak, inspect the drain area and look for ice buildup in the drain path.

Common fixes and related parts for this model

Problem area	What fails most often	Example part for 79572039112
Water tastes bad or flow is weak	Clogged water filter	Genuine Kenmore refrigerator water filter 9690 AGF80300801
No water to dispenser/ice maker	Water inlet valve	Lg refrigerator water inlet valve AJU72992601
Puddles or water under unit	Drain path restriction	Refrigerator drain tube 5251JA3003D
Light stays off or won’t shut off	Door switch	Refrigerator door switch 6600JB1010A
No ice production	Ice maker failure	Ice maker assembly (AEQ73110203) - refrigerator ice making component by lg AEQ73110203

Why it matters

Catching these issues early protects food, prevents water damage, and reduces strain on major components like the compressor. Simple maintenance (airflow and filter changes) also improves efficiency and performance.

Helpful model-specific resources

• Use the owner's manual for control settings, alarm meanings, and maintenance intervals.
• For display or diagnostic issues, see Kenmore 795 model bottom freezer refrigerator error codes.

Last updated: February 2026

On Kenmore model 79572039112, the “bottom part” most often refers to the compressor compartment at the bottom rear; it houses the compressor, condenser coil, and fan that remove heat so the refrigerator can cool properly. For exact locations, use the owner's manual.

What people mean by “the bottom part”

Depending on where you’re looking, the term can point to different areas:

• Compressor compartment (bottom rear): cooling-system components and wiring
• Lower front grille/toe grille: the vented cover at the very bottom front (on some designs)
• Freezer section: on a bottom-mount, the freezer drawer is the lower compartment
• Drain pan area (bottom rear): defrost water drains into a pan in the compressor compartment to evaporate

Common bottom-area components on model 79572039112

These are typical parts you’ll find in the compressor compartment on this model:

Component	What it does	Example part listed for this model
Compressor	Pumps refrigerant through the sealed system	Refrigerator compressor TCA38091801
Condenser coil	Releases heat from the refrigerant	Refrigerator condenser coil ACG73964501
Condenser fan motor	Pulls air across the condenser coil and compressor	Refrigerator ac motor EAU61843013
Compressor overload protector	Protects the compressor during overheating or electrical overload	Refrigerator compressor overload protector 6750CL0001D

Why it matters

The bottom rear area often feels warm because it is where heat is expelled. If you’re troubleshooting clicking, overheating, or no-cool symptoms, identifying whether you mean the compressor compartment versus the freezer drawer changes which checks and parts apply.

Last updated: February 2026