Kenmore 11080754002 stacked laundry center Parts

To tell how old your Kenmore stacked laundry center model 11080754002 is, find the model and serial number tag on the unit and decode the manufacture date from the serial number. Kenmore serial formats vary by the manufacturer, so we use the identification guidance in the 11080754002 manual.

Find the model and serial number tag

On stacked laundry centers like 11080754002, the tag is usually on the cabinet where it stays readable and protected.

Check these common spots:

• Around the washer lid opening (top rim or underside of the lid)
• Inside the dryer door opening on the front panel
• On the back panel of the cabinet
• On a side panel near the upper (dryer) section

Decode the manufacture date from the serial number

Once you have the serial number, the date is typically encoded in the first few characters.

Use this process:

• Write down the entire serial number exactly
• Look at the first 2 to 4 characters for a date code
• Identify a month indicator (often 01 to 12)
• Identify a year indicator (often 1 or 2 digits, sometimes a letter)

Common serial date-code patterns

Serial starts with	Date meaning	How to use it
YYMM...	Year, then month	Convert YY to the year and MM to the month
YMM...	Year (1 digit), then month	Match the year digit to the correct decade, then month
Letters plus numbers	Plant plus date code	Use the letter positions as the year/month code

Why it matters

The manufacture date helps us match the correct parts and any production changes for your laundry center, which can affect fit and wiring on items like a timer, motor coupling, or drain pump.

Parts that are commonly replaced on this model

If you are troubleshooting by symptom, these are frequent wear items for Kenmore 110-series laundry centers:

• Washer timer WP3952379 (cycle timing and advancing)
• Coupling 285753A (motor-to-transmission drive coupling)
• Washer drain pump WP3363394 (draining and spin performance)

You can order replacement parts from the parts list for model 11080754002, or search by model number on Sears PartsDirect.

Last updated: February 2026

For Kenmore stacked laundry center model 11080754002, the most common problems are washer not draining or spinning, washer agitation issues, dryer not heating, dryer not starting, and loud operation. These symptoms usually trace to a small set of wear parts and a few basic airflow or load-balance checks.

Common symptoms and what usually causes them

• Washer won’t drain or leaves water in the tub: clogged pump, blocked drain hose, or a failing pump such as the washer drain pump WP3363394.
• Washer won’t spin or spins weakly: worn drive coupling, clutch wear, or an out-of-balance load; the coupling 285753A and clutch 285785 are common suspects.
• Washer agitator doesn’t move correctly: worn agitator dogs; the agitator dog 80040 is a frequent fix.
• Dryer runs but doesn’t heat: heating circuit issue, wiring/terminal damage, or airflow restriction; the dryer heating element wire kit 279457 is often used when connections are overheated or damaged.
• Dryer won’t start: door not latching, start switch issue, or timer/control problem; the dryer push-to-start switch WP3977456 is a common replacement.

Quick checks we recommend before replacing parts

• Confirm the unit is getting proper power (dryer heat requires full supply).
• Clean the lint screen and verify the vent is clear and not crushed.
• Reduce load size and redistribute items to correct off-balance spin issues.
• Check for coins, socks, or debris in the pump area and drain path.
• Listen for symptoms: grinding (drive), humming (pump), squealing (dryer idler).

Symptom-to-part cheat sheet

Symptom	Most likely area	Example part on this model page
Won’t drain	Drain system	Washer drain pump WP3363394
No/weak agitation	Agitator drive	Agitator dog 80040
No/weak spin	Drive train	Coupling 285753A, clutch 285785
No heat	Heat circuit or airflow	Dryer heating element wire kit 279457
Won’t start	Start/door circuit	Dryer push-to-start switch WP3977456

Why it matters

Catching these issues early prevents secondary damage, like a slipping coupling that stresses the drive motor, or restricted dryer airflow that overheats wiring and components. For model-specific operating and maintenance steps, use the owner's manual.

Last updated: March 2026

The dryer drum capacity for Kenmore stacked laundry center model 11080754002 is provided in the model-specific specifications section of the 11080754002 owner's manual. For this style of Kenmore laundry center dryer, capacity is commonly described as a cubic-feet drum volume and is used to size loads for proper airflow.

Where the exact capacity is listed

Use the manual for 11080754002 because capacity is a specification that can vary between similar-looking 110-series units.

• Open the 11080754002 owner's manual
• Look for headings such as “Specifications”, “Product features”, or “Dimensions/Capacity”
• Find the line that lists dryer capacity or drum volume (usually shown in cu. ft.)
• If you only see dimensions, check nearby pages for a spec table or feature list

How capacity affects real-world loading

Capacity is mainly about leaving room for tumbling and airflow; that is what dries clothes evenly.

• Don’t pack the drum tight; items should tumble freely
• Bulky loads (towels, bedding) need extra space for airflow
• Mixed loads dry more evenly than one heavy item
• If loads come out damp, check venting and lint buildup before assuming a heater problem

What you’re deciding	Use capacity for	Result when sized correctly
Load size	Matching load volume to drum volume	Better airflow and fewer damp spots
Cycle choice	Picking timed vs. automatic cycles	More consistent dryness
Troubleshooting	Separating airflow issues from heat issues	Faster, more accurate diagnosis

Why it matters

Using the correct drum capacity for 11080754002 helps prevent long dry times, overheating, and wrinkling. Many “capacity” complaints are actually airflow problems; start with lint screen and vent checks, then move to mechanical issues.

Parts that can relate to drying performance

If the dryer tumbles poorly or dries unevenly, these model-matched parts are commonly involved:

• Dryer idler pulley WP691366 (maintains belt tension so the drum tumbles)
• Dryer heating element wire kit 279457 (addresses damaged heater wiring connections)
• Dryer drum 3391834 (helps if the drum is worn or damaged)

You can order replacement parts for 11080754002 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026