Owner’s manual
Error Codes
How wide is a Kenmore side by side refrigerator?
Most Kenmore side-by-side refrigerators are about 32 to 36 inches wide; for Kenmore model 10659122801, the exact cabinet width is listed in the 10659122801 owner's manual. If you are measuring for a tight opening, also plan for door swing and ventilation clearances.
Side-by-side refrigerators commonly fall into these width bands:
- 32 to 33 inches: narrower kitchens and smaller capacities
- 35 to 36 inches: most common full-size side-by-side footprint
- 42 inches: larger, premium side-by-side models (less common)
| Refrigerator style | Typical width | Notes |
|---|---|---|
| Side-by-side (standard) | 32 to 36 in. | Most Kenmore units land here |
| Side-by-side (large) | ~42 in. | Requires more cabinet space |
Use a tape measure and check three spots: top, middle, and bottom of the opening.
- Measure the opening width (wall to wall or cabinet to cabinet)
- Measure the refrigerator cabinet width (not including handles unless they stick out)
- Allow clearance for door swing if the unit sits next to a fixed wall
- Leave ventilation space; the manual calls for 1/2 inch on each side and at the top, and 2 inches minimum on the hinge side next to a fixed wall (depending on the model)
- If you have an ice maker, allow extra room behind for the water line connection
A refrigerator that is even 1/2 inch too wide can bind against cabinets, prevent doors from opening fully, and reduce airflow. Proper clearance helps cooling performance and helps avoid moisture and heat buildup.
Last updated: January 2026
What are the most common issues with 10659122801?
The most common issues we see with the Kenmore 10659122801 side-by-side refrigerator involve weak or no ice and water dispensing, temperature swings from airflow or defrost problems, and door sealing or dispenser wear. Many fixes start with basic checks, then targeted parts testing using the owner's manual.
- Ice maker not making ice: water supply issue, frozen fill tube, or a failing ice maker.
- Water dispenser slow or not dispensing: clogged filter, low house water pressure, or a weak inlet valve.
- Fridge warm but freezer cold (or vice versa): evaporator fan or airflow blockage, frost buildup from a defrost issue.
- Frost on back wall of freezer: defrost system problem (control, thermostat, heater circuit).
- Leaking water or puddles: clogged defrost drain, loose water tube connection, or cracked tubing.
- Door not closing well or popping: worn door cam or misalignment.
- Confirm controls are set correctly and vents are not blocked by food.
- Check the condenser area for dust buildup and clean it.
- If water is slow, replace the filter and flush several gallons.
- Inspect door gaskets for gaps and confirm doors are level.
- Listen for the evaporator fan in the freezer; it should run when cooling.
| Symptom | Common part to check/replace | Example from this model’s parts |
|---|---|---|
| Slow water, no ice fill | Water filter | Genuine Kenmore refrigerator water filter EDR3RXD1 |
| No water to dispenser/ice maker | Water inlet valve | Refrigerator water inlet valve W10408179 |
| No ice production | Ice maker assembly | Refrigerator ice maker WPW10190965 |
| Door closing issues/clicking | Door cam | Refrigerator door cam (black) WP2182179 |
| Defrost-related cooling issues | Adaptive defrost control | Refrigerator adaptive defrost control board WPW10366605 |
On a side-by-side like model 10659122801, airflow and water supply problems can quickly cause warm temperatures, poor ice production, and nuisance leaks. Catching the root cause early helps protect food and prevents secondary damage (like ice buildup around the evaporator).
For step-by-step filter help and fit guidance, use how to replace the water filter in a Kenmore refrigerator.
Last updated: March 2026
How do I find the model number on my 10659122801?
The model number for your Kenmore side-by-side refrigerator is printed on the model and serial number label attached to the appliance. Use that label to confirm you have model 10659122801 before ordering parts or using troubleshooting steps from the owner's manual.
On Kenmore side-by-side refrigerators like model 10659122801, the model and serial number label is typically in one of these spots:
- Inside the fresh food (refrigerator) compartment on a side wall
- On the ceiling of the fresh food compartment near the light
- Behind the crisper drawers on the side wall
- Along the door frame (hinge side) when you open the refrigerator door
- Less commonly, inside the freezer compartment on a side wall
Record the information exactly as shown on the label so we can match the correct diagrams and parts.
- Complete model number (for example: 10659122801)
- Serial number
- Purchase date (if available)
- Any suffixes or additional digits printed with the model number
| Item | What it’s used for | Example |
|---|---|---|
| Model number | Ensures correct part fit and diagrams | 10659122801 |
| Serial number | Helps identify production series | Varies |
| Purchase date | Helpful for maintenance history | Varies |
- Match every digit; one wrong number can point to a different Kenmore 106-series refrigerator.
- If the label is worn, take a clear photo and zoom in to read it.
- Once confirmed, use the model number when selecting parts such as the genuine Kenmore refrigerator water filter EDR3RXD1.
Kenmore refrigerators often share similar door styles and dispenser layouts across multiple models; the model number is what guarantees the right water filter, ice maker, thermostat, or control board for your exact unit.
Last updated: March 2026
