Craftsman 917271014 lawn tractor Parts

For a Craftsman riding lawn tractor like model 917271014, replacing the engine typically costs about $260 to $1,800 installed, depending on the engine type, labor rates, and whether related parts (belts, pulleys, wiring) also need service. Confirm the exact engine spec and mounting details in the 917271014 owner's manual.

• Engine price: new, used, or rebuilt engine options vary widely
• Labor time: riding mower engine swaps commonly run around 6 hours of shop time
• Extra parts: worn drive or deck components often get replaced at the same time
• Shop supplies: oil, filter, fuel line, clamps, hardware
• Pickup/delivery: some shops charge transport fees for riding mowers

If the old engine failed violently, overheated, or threw a belt, these items are often inspected and replaced as needed:

• Ground drive belt (cracking, glazing, stretching): v-belt 532138255
• Blade drive belt (slipping, fraying): lawn tractor drive belt 532144200
• Engine pulley (wobble, worn grooves): engine pulley 532140186
• Mower deck spindle/mandrel (bearing noise, play): husqvarna lawn tractor mandrel assembly 532130794

An engine replacement only pays off when the rest of the tractor is in good shape. Checking belts, pulleys, and deck mandrels during the swap helps prevent immediate follow-up failures and protects your cut quality and drive performance.

Last updated: January 2026

On the Craftsman lawn tractor model 917271014, the engine model number is typically on an engine identification label or stamped plate mounted directly on the engine itself (often on the top of the engine cover/shroud or on the side of the blower housing). Use that engine number when ordering engine-specific parts.

Check these common locations first (wipe dirt and grass off before reading):

• Top of the engine cover/shroud (often easiest to see on twin-cylinder engines)
• Side of the blower housing (near the recoil starter area, if equipped)
• Valve cover area or nearby flat metal surface
• Near the muffler heat shield (label may be on the shroud close by)
• Under the hood, on the engine itself (not on the tractor frame)

Most engine ID labels include multiple fields. Record everything exactly as shown.

• Clean the label area with a dry rag; avoid soaking decals with solvent.
• Use a flashlight and take a photo; zoom in to confirm characters.
• Write down the full string; one wrong digit can point to a different engine.
• If the label is missing, look for stamped numbers on a metal plate or flat boss.

The tractor model number 917271014 identifies the mower chassis and deck, but the engine model number identifies the exact engine build. That is the key to getting the right tune-up parts, ignition parts, and fuel system components.

For diagrams and model identification details for your tractor, use the 917271014 owner's manual.

Last updated: January 2026

The Craftsman lawn tractor model 917271014 uses a gasoline-powered, single-cylinder riding mower engine (commonly a Briggs & Stratton-style setup on this platform). For the exact engine family, displacement, and tune-up specs for your tractor, match the engine model and type code shown in the 917271014 owner's manual.

Use these quick checks to confirm the engine make and model before ordering parts or doing a tune-up:

• Look for the engine ID label on the blower housing, valve cover, or near the starter
• Record the model, type, and code (or serial) exactly as printed
• Compare the label info to the engine section in the manual
• If the label is missing, use the tractor’s build info plus engine physical features (air filter style, carb layout)
• Confirm whether your tractor is set up for a 42-inch deck before buying blade or belt parts

Many “engine” complaints on a front-engine tractor are actually deck or drive issues. These parts are common culprits:

• Ground drive belt (loss of movement): v-belt 532138255
• Blade drive belt (blades won’t engage): lawn tractor drive belt 532144200
• Deck vibration or rough cut: mandrel and pulley components

The tractor model number (917271014) identifies the chassis and deck system, but the engine model code identifies the correct ignition, carburetion, filters, and tune-up parts. Confirming the engine ID prevents wrong-part returns and speeds up troubleshooting.

Last updated: January 2026

Craftsman lawn tractor model 917271014 was produced starting in 2004; the exact build year for your specific tractor is determined by the serial number on the ID label. Use the identification section in the 917271014 owner's manual to match your model and serial information.

Use the tractor’s ID label first; it is the most reliable way to pin down the production run.

• Locate the model and serial label (commonly under the seat, on the frame rail, or near the engine)
• Write down the full model number (917271014) and the full serial number
• Clean the label gently so every character is readable
• Compare the serial number format to the identification guidance in the 917271014 owner's manual
• Use the confirmed serial information when ordering belts, blades, steering, or deck parts

Craftsman tractors can have mid-run changes (deck hardware, belt routing, blade mounting, steering parts). Confirming the build year by serial number helps you order the correct replacement parts the first time.

Last updated: January 2026