Craftsman 917292300 tiller Parts

On the Craftsman 917292300 front-tine tiller, the “blades” are called tines. Tines are the rotating digging tools that break up, mix, and cultivate soil; different tine shapes are used depending on soil conditions and how aggressively you want to till.

• Tines (most common)
• Tiller tines
• Cultivator tines
• Digging tines

Most front-tine tillers use one of these common tine styles:

Replace tines when you notice any of these:

• Rounded or worn leading edges (tiller “skips” or bounces)
• Bent or cracked tine arms
• Uneven tilling depth side-to-side
• Excessive vibration from a damaged tine set

For step-by-step help, we recommend how to replace the tines on a front tine tiller.

Using the right tine style and keeping tines in good condition helps your Craftsman 917292300 tiller dig consistently, reduces strain on the drive system, and improves soil texture for planting.

Last updated: February 2026

On a Craftsman tiller like model 917292300, the model number is printed on a product ID label (a sticker or metal tag). It’s most often located on the tine shield/guard area or on or near the fuel tank; some units place it on the front of the frame.

Look for a rectangular label that includes the model number and sometimes a serial number. Check these spots:

• On the tine guard (tine shield) above or behind the tines
• On the frame near the engine mount
• On or near the fuel tank (side or top area)
• On the front of the tiller frame (especially on larger units)
• Near the handle support brackets

If the label is dirty or worn, these steps usually help:

• Wipe the area with a damp rag; dried mud often hides the tag
• Use a flashlight and look from the side of the tine shield
• Check both sides of the frame rails
• If the sticker is faded, look for an embossed or stamped metal tag

The exact model number (for example, 917292300) ensures we match the correct Craftsman tiller parts, diagrams, and hardware sizes. That’s especially important for common wear items and fasteners such as a depth stake 532446066 or a control lever 584447601.

Last updated: February 2026

Yes. Craftsman tillers, including the Craftsman 917292300 front-tine tiller, are a solid choice for typical home garden work because they’re widely supported with replacement parts and are designed for straightforward maintenance. Like any tiller, long-term satisfaction depends on correct setup, belt/tine condition, and not overloading the machine in rocky soil.

A tiller is doing its job when it consistently breaks up soil without excessive bouncing, belt slip, or stalling. For most homeowners, a “good” tiller delivers:

• Reliable tine engagement and consistent digging
• Manageable vibration and controllable handling
• Easy-to-find wear parts (nuts, pins, pulleys, idlers)
• Reasonable upkeep (tune-ups, belt checks, tine inspection)

Craftsman tillers tend to earn praise for capability, but the same themes come up when users are unhappy.

If your 917292300 feels weak, hard to control, or inconsistent, these checks usually make the biggest difference:

• Inspect tines for rounding, bending, or missing hardware; replace as needed
• Verify the depth stake is set correctly for the soil (shallow passes first)
• Check belt-driven components for slip (glazing, burning smell, squeal)
• Confirm the tine control linkage moves freely; a worn lever can reduce engagement
• Tighten and replace worn fasteners instead of reusing distorted lock nuts

Helpful DIY guidance: tiller common questions

Wear items and linkage hardware are frequent culprits when a tiller “feels worn out.” For this model, examples include the control lever 584447601 and the depth stake 532446066.

A tiller can seem “bad” when it’s really just worn tines, a slipping drive system, or loose linkage hardware. Restoring proper engagement and depth control usually brings back the performance you expect.

Last updated: February 2026

A power tiller (including the Craftsman 917292300 front-tine tiller) is built from an engine-driven powertrain that turns the tines, plus controls and hardware that let you steer, set depth, and keep everything secured. Common parts include the tine drive components, control levers/cables, pulleys/idlers, and fasteners.

• Engine and starting system (recoil starter, fuel system, ignition)
• Drive system (belts, pulleys, idlers, and related brackets)
• Transmission/gearcase (transfers power to the tine shaft)
• Tines and tine shaft (the cultivating blades that break soil)
• Handle and controls (throttle, engagement lever, cable)
• Depth control (depth stake and its mounting hardware)
• Wheels/drag stake setup (varies by model and configuration)

These are common “building block” parts you will see when servicing the tine drive and controls:

• Control lever 584447601 (tine engagement control)
• Idler pulley 532161806 (helps maintain belt tension)
• Tiller idler arm 583005201 (positions the idler for proper belt tracking)
• Sheave transmission 532151223 (drive sheave that helps transfer power)
• Depth stake 532446066 (sets tilling depth)

Knowing the major tiller parts helps you troubleshoot faster. For example, “engine runs but tines will not turn” usually points to the belt, idler pulley/arm, engagement cable, or transmission drive components rather than the engine itself.

• Use tiller common questions to match symptoms (tines not turning, poor tilling, rough running) to likely causes.
• If you are replacing worn cultivating blades, follow how to replace the tines on a front tine tiller for safe removal and correct tine orientation.

Last updated: February 2026