Craftsman 917276683 tractor Parts

On Craftsman lawn tractor model 917276683, the model number is printed on the product identification label. On this tractor series, that label is typically located under the seat; raise the seat and look on the underside area for the tag.

Check these common label locations first:

• Underside of the seat pan (lift the seat up)
• Frame area directly under the seat
• Rear fender deck near the seat mounting area
• Inside the hood area near the engine compartment (less common)

Use a flashlight and wipe off grass or oil film so the numbers are readable.

For this Craftsman series, the model number is a 9-digit number in the format shown below.

Tip: Write it down exactly as printed; one digit off can pull the wrong belts, blades, or electrical parts.

The model number is the fastest way to get the right parts for your mower deck and drive system. For example, belt routing and blade style can vary by model, even within the same Craftsman tractor family.

For diagrams and additional label details, use the 917276683 owner's manual.

Last updated: February 2026

The Craftsman lawn tractor model 917276683 uses a low-emission gasoline engine; in this model series it is paired with electric start and an automatic transmission. For the exact engine make, model, and service specs, use the 917276683 owner's manual.

From the operator documentation for the 917.276680 through 917.276683 series, this tractor is described as a lawn tractor with these core powertrain features:

• Low-emission gas engine design (operates differently than older engines)
• Electric start system
• Automatic transmission
• 42-inch mower deck platform (deck size for this series)

Engine identification is typically listed on the engine label (often on the blower housing or valve cover area) and in the specifications section of the manual.

• Check the engine ID label for the model, type, and code
• Match that information to the engine tune-up parts you are buying (spark plug, air filter, fuel filter)
• Use the manual for the correct oil type, capacity, and maintenance intervals

Riding mower engines can look similar across Craftsman tractors, but the correct spark plug, air filter, and even oil viscosity depend on the exact engine model. Using the engine ID and the manual keeps maintenance accurate and helps the tractor start and run reliably.

Last updated: February 2026

A “Craftsman 6.75” label usually refers to the engine rating, not the mower’s model number. For Craftsman walk-behind mowers, the model number is typically on the mower’s ID tag (often starting with 917). Use the ID tag number, not the engine label, when ordering parts.

Check these common locations on a Craftsman walk-behind mower:

• Rear of the deck near the discharge chute
• Under the rear bagger door or on the back panel
• On the frame near the rear wheels
• Near the engine mounting area on the deck
• On a sticker or metal plate labeled “Model” or “Product Number”

For your Craftsman riding tractor model 917276683, the identification and service info is covered in the 917276683 owner’s manual.

On many mowers, “6.75” is an engine series/torque class used for marketing and service reference. It does not uniquely identify the mower chassis, deck, or drive system, which is why parts lookups require the mower model number.

Use this checklist so we match the right diagrams and repair parts:

• Record the full mower model number exactly as shown on the ID tag
• Write down the product number (if listed) and serial number
• Note deck size (example: 21-inch) and whether it is self-propelled
• Match the part by diagram location, not by appearance alone

Using the correct model number prevents wrong belts, blades, wheels, and drive parts. Even small design changes within the same deck size can change blade adapters, belt lengths, and mounting hardware.

Last updated: February 2026

For Craftsman lawn tractor model 917276683, the engine’s model number is not the same as the tractor model number; the tractor model is 917276683, and the engine model is listed on the engine ID label and in the 917276683 owner's manual.

Look for the engine identification label, then match it to the manual’s engine information.

• Check the engine shroud/blower housing (top or side of the engine)
• Look near the starter, valve cover, or muffler heat shield
• Wipe off dirt and oil; the label is often hard to read when dusty
• Write down the engine model, type, and code/date (all are useful for parts)
• Use the manual’s diagrams to confirm you are reading the correct label

The tractor model (917276683) helps us match chassis, deck, belts, blades, and steering parts. The engine model is what you need for engine-specific items like the air filter, spark plug, carburetor parts, and starter components.

If the engine clicks or spins but will not start, use these checks before ordering parts:

• Confirm the battery is charged and terminals are clean and tight
• Verify the brake pedal is fully depressed and PTO/blade switch is off
• Listen for a single click at the solenoid versus rapid clicking
• Inspect wiring at the solenoid; replace if connections are loose or corroded
• If you suspect the solenoid, match by tractor model and wiring layout; see lawn tractor starter solenoid 582042802

For step-by-step diagnostics, follow the riding lawn mower engine clicks but doesnt turn over video.

Last updated: February 2026