Kenmore 66517489300 undercounter dishwasher Parts

Your Kenmore dishwasher’s model number is printed on the model and serial number label located just inside the door opening on the tub frame. For Kenmore model 66517489300, that label is one of the listed “parts and features” inside the dishwasher.

• Open the dishwasher door fully.
• Look along the inside edge of the tub opening (door frame area).
• Check the left and right sides of the opening, then the top edge.
• Find a sticker or metal tag that lists Model and Serial.
• Write the model number exactly as shown (numbers and any dots).

The label typically includes:

• Model number (used to match parts like a door gasket, drain hose, or pump)
• Serial number (used to identify production details)
• Electrical ratings (helpful for service diagnostics)

Kenmore dishwashers often share similar-looking doors and control panels across multiple models. Using the exact model number prevents ordering the wrong items (for example, a door seal, vent gasket, or silverware basket) and helps you follow the correct procedures in the 66517489300 owner’s manual.

Last updated: February 2026

Yes, it’s usually worth repairing a Kenmore dishwasher when the problem is isolated (leak, no-drain, or a worn rack part) and the unit is otherwise cleaning well. For Kenmore model 66517489300, we recommend repair first when the fix is straightforward and the dishwasher has been dependable.

We use these practical checkpoints before spending money on parts or labor:

• Repair when the issue is a single failure (drain hose clog/leak, door seal leak, blown fuse, worn rack components).
• Repair when the dishwasher still washes quietly, heats, and dries normally.
• Replace when you’re facing repeated breakdowns in different systems (drain, wash motor, leaks) within a short time.
• Replace when the tub or inner door is leaking from corrosion or damage (a major repair).
• Repair when you can confirm the correct procedure and safety steps in the 66517489300 owner’s manual.

These are frequent, targeted fixes on undercounter dishwashers like this Kenmore:

• Drain problems: replace a cracked or leaking dishwasher drain hose 8269144A
• Door leaks: replace the door seal or related gaskets (leaks at the bottom edge are common)
• No power: test and replace a thermal fuse such as fuse 8193762
• Poor wash or grinding noise: inspect the chopper and circulation components

A focused repair can extend the life of your 66517489300 and avoids the time and cost of replacing an undercounter dishwasher (removal, installation, and potential cabinet adjustments). The manual also emphasizes ongoing care and troubleshooting steps that help prevent repeat failures.

• Check for simple restrictions first (kinked drain hose, clogged air gap, blocked filters).
• Look for where the problem is happening (door edge leak vs. under-unit leak).
• If electrical testing is needed, use safe meter practices and confirm steps in the 66517489300 installation guide.

Last updated: February 2026

For the Kenmore 66517489300 undercounter dishwasher, the most common issues are no-start or stopping mid-cycle, not filling, water left in the tub, detergent not dispensing fully, long run times, poor drying, and unusual grinding noises. The troubleshooting section in the owner's manual covers these symptoms and the quickest checks.

• Won’t start or stops during the cycle: confirm the door is fully closed and latched, and the correct cycle is selected.
• No power: check the household breaker or fuse; the motor can also overload and reset after a few minutes.
• Won’t fill: make sure the water shutoff valve is on; press the overfill protection float down so it moves freely.
• Runs too long: hot water supply matters; some cycles pause while the dishwasher heats water to temperature.
• Water remains in the tub: verify the cycle completed; check for a kinked or clogged drain path.
• Detergent left in the dispenser: confirm the cycle completed and the detergent is fresh and lump-free.
• Poor drying: use rinse aid, avoid overloading, and choose a heated dry option when needed.

If your checks point to a failed component, these model-matched parts are commonly involved:

• Fuse 8193762 for a dead dishwasher or intermittent power.
• Dishwasher drain hose 8269144A for draining problems (kinks, splits, or restrictions).
• Dishwasher pump and motor assembly W10782773 when circulation is weak, noisy, or the unit stops due to motor issues.

Catching simple causes (a stuck float, wrong cycle, cold incoming water, or a blocked drain path) prevents repeat wash failures and reduces strain on the pump, heater, and door latch system.

Last updated: March 2026