Kenmore 11020702990 washer Parts

Kenmore washer model 11020702990 is a classic top-load, agitator-style washer; its tub capacity is typically in the 3.2 to 3.5 cu. ft. range for this Kenmore 110-series design. For the exact published capacity for your specific unit, check the specifications section in the 11020702990 owner's manual.

How to confirm the exact capacity for your washer

Capacity is usually listed in the specs/features pages of the manual or on the model/serial tag. Use these quick checks:

• Look in the manual for “capacity,” “basket volume,” or “specifications”
• Check the model and serial number plate on the cabinet (often under the lid area)
• Compare your control panel and cycle options to the pictures/descriptions in the manual
• If you are shopping for replacement parts, match by model number first (11020702990)

Typical capacity ranges (so you can size loads correctly)

Here is a practical guide for older, standard top-load washers like Kenmore 11020702990:

Washer type	Typical capacity range	Best for
Standard top-load with agitator	3.0 to 3.6 cu. ft.	Everyday mixed loads
Large-capacity top-load	3.8 to 4.5+ cu. ft.	Bulky items, fewer loads
Compact top-load	1.5 to 2.8 cu. ft.	Small spaces, light laundry

Why it matters

Knowing cubic feet helps us load the basket correctly (better cleaning, fewer out-of-balance spins) and choose the right cycle and water level. Overloading also increases wear on drive components like the coupling 285753A and can contribute to vibration.

Last updated: February 2026

To hard reset your Kenmore washer model 11020702990, we recommend a simple power reset: unplug the washer (or switch off the breaker) for 1 minute, then restore power and restart the cycle. This clears minor control glitches and stuck cycle behavior.

Quick hard reset steps (power reset)

• Turn the Cycle Selector (Timer) knob to OFF.
• Unplug the washer from the outlet (or turn off the circuit breaker).
• Wait 60 seconds.
• Plug the washer back in (or turn the breaker on).
• Close the lid, select a cycle, then pull the timer knob out to start.

If the washer still will not start or advance

On this style of Kenmore top-load washer, the timer and lid switch are common “no start” or “won’t spin” culprits.

• Confirm the lid closes fully and the lid strike lines up.
• Try a different cycle and pull the timer knob out firmly.
• If the washer fills but will not agitate or spin, check the lid switch circuit.
• If the timer stalls or skips, the timer contacts can be worn.

Parts that commonly relate to “won’t run” symptoms

Symptom	Most common check	Example part for this model
No spin, no agitation	Lid switch not closing	Washer lid switch WP3949238
Timer won’t advance	Timer contacts worn	Washer timer WP661636
Won’t drain, stops mid-cycle	Pump jammed or failed	Washer drain pump WP3363394

Why it matters

A hard reset fixes temporary electrical or control “hang-ups.” If the problem returns right away, the washer usually needs a mechanical or electrical fix (lid switch, drain pump, or timer) rather than repeated resets.

Model-specific reference

For the correct stop/restart method (push the timer knob in to stop; pull it out to restart) and operating steps for the 11020702990, use the 11020702990 owner's manual.

Last updated: February 2026

Your Kenmore washer model number is printed on the model and serial number plate; on Kenmore model 11020702990, that plate is the key identifier you will use to match the correct washer parts, diagrams, and troubleshooting steps. Record the full model number and serial number exactly as shown.

Where to look on the washer

Most Kenmore washers place the model and serial number plate in one of these common spots:

• Under the lid near the tub opening (many top-load washers)
• Inside the door opening (many front-load washers)
• On the back panel near the power cord entry
• Along the cabinet edge near the control console

For model-specific guidance and illustrations, use the 11020702990 owner's manual.

What the model number looks like (and why it matters)

Kenmore washer model numbers are often numeric and commonly start with 110. Using the complete model number (not just the first three digits) ensures we match the correct Kenmore/Whirlpool-built design and the right replacement parts.

Quick ID checklist

• Copy the model number exactly (example: 11020702990)
• Copy the serial number exactly (helps with production range and revisions)
• Take a clear photo of the plate before ordering parts
• Use the model number when searching for parts like a lid switch, drain pump, or coupling

Common mix-ups to avoid

What you see	What it is	What to do
“11020702990”	Model number	Use this to find correct parts and diagrams
A long number with letters and dates	Serial number	Keep it for reference; include it when asking for service
Numbers on the control panel	Cycle settings	Not used for parts lookup

Why it matters

The model number ties your washer to the correct parts list and repair procedures. For example, if your washer will not spin or drain, the right model number helps us match parts such as the washer lid switch WP3949238 or washer drain pump WP3363394 to your exact Kenmore washer design.

Last updated: February 2026

Kenmore washer model numbers are structured so you can identify the manufacturer and the exact product variation. For Kenmore model 11020702990, the 110 prefix identifies the manufacturer, and the remaining digits narrow down the base design and specific configuration; we use the full number to match the correct washer parts.

What each section of the model number tells you

Most Kenmore washer model numbers break down like this:

• 3-digit prefix: manufacturer code (for example, 110)
• Middle digits: base model platform or series
• Ending digits: feature set, production changes, or version details

To confirm you are reading the right number, use the model and serial number plate location shown in the 11020702990 owner's manual.

Where to find the model number on the washer

The model number you need is on the model and serial number plate. Use these quick checks:

• Look for a label or plate that says Model No. and Serial No.
• Write down the entire model number (all digits)
• Match the number exactly when ordering parts (no missing digits)
• Keep the number with your purchase records for future reference

Quick example (using your model)

Example model number	What it indicates	Why it matters
11020702990	110 = manufacturer prefix; remaining digits = exact configuration	Ensures correct fit for parts like a lid switch, drain pump, or gear case

Why it matters for parts and troubleshooting

Kenmore used multiple manufacturers and design platforms, so two washers that look similar can use different components. Using the full model number helps us match the correct diagrams and parts for your exact washer, including common repairs involving the lid switch, drain pump, coupling, or agitator components.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years with normal household use. For Kenmore model 11020702990, good installation, correct loading, and routine care (as outlined in the 11020702990 owner's manual) help you reach the high end of that range.

What affects lifespan the most

• Overloading the basket and stressing the drive system
• Out-of-balance loads that increase vibration and wear
• Poor installation (not level, leg nuts not tight) that leads to shaking
• Water quality and detergent habits (buildup can cause odors and performance issues)
• Wear parts aging out (lid switch, drain pump, coupling, clutch)

Quick maintenance habits that extend washer life

• Keep loads evenly distributed; avoid washing one heavy item by itself.
• Do not wrap items around the agitator (a common cause of tangling and poor wash action).
• Confirm the washer is level and the front leg nuts are tight to reduce vibration.
• Use the right amount of detergent; too much can leave residue.
• Address small symptoms early (slow drain, no spin, intermittent stopping).

Common “end-of-life” symptoms and likely parts

Symptom	What you may notice	Common part to check on this model
Won’t spin or stops when lid closes	Intermittent operation	Washer lid switch WP3949238
Won’t drain or drains slowly	Water left in tub	Washer drain pump WP3363394
Agitation issues	Weak or no agitation	Agitator dog 80040
Loud noise or poor spin	Slipping, burning smell, slow spin	Clutch 285785
No agitation and no spin	Motor runs but basket does not move	Coupling 285753A

Why it matters

A washer that is level, loaded correctly, and maintained tends to run quieter, clean better, and avoid high-wear failures. The manual’s setup checklist (leveling, tightening leg nuts, confirming water supply) is especially important because vibration and repeated strain shorten the life of the transmission and suspension.

Last updated: February 2026