KitchenAid
Stand Mixer

Model #K45 KitchenAid mixer

Here are the diagrams and repair parts for KitchenAid K45 mixer, as well as links to manuals and error code tables, if available.


There are a couple of ways to find the part or diagram you need:

  • Click a diagram to see the parts shown on that diagram.
  • In the search box below, enter all or part of the part number or the part’s name.

Not all parts are shown on the diagrams—those parts are labeled NI, for “not illustrated”.

We encourage you to save the model to your profile, so it’s easy to access parts and manuals for your appliance whenever you log in.

For DIY troubleshooting advice and repair guides, visit our repair help section.

Save to my profile

    Showing 10 of 65 parts

    WASHER-SPACING (.030" THK.) (AR)

    #25

    Motor and control Diagram

    Washer-spacing (.030" thk.) (ar)

    Part #WS-4-38

    The manufacturer no longer makes this part, and there's no substitute part

    WASHER, FIBER (.015" THK.) (AR)

    #6

    Case,gearing, and unit Diagram

    Washer, fiber (.015" thk.) (ar)

    Part #WS-6-4

    The manufacturer no longer makes this part, and there's no substitute part

    WASHER - SHIM (.031" THK.)(AR)

    #42

    Case,gearing, and unit Diagram

    Washer - shim (.031" thk.)(ar)

    Part #WS-7-32

    The manufacturer no longer makes this part, and there's no substitute part

    CENTER SHAFT AND "O" RING SUB-ASSEMBLY (INCLUDES ITEMS NO 13, 16, 19, 20 AND 57)

    #NI

    All parts Diagram

    Center shaft and "o" ring sub-assembly (includes items no 13, 16, 19, 20 and 57)

    Part #B-101593

    The manufacturer no longer makes this part, and there's no substitute part

    LOAD WIRE ASSEMBLY (GREEN)

    #11

    Motor and control Diagram

    Load wire assembly (green)

    Part #B-240136

    The manufacturer no longer makes this part, and there's no substitute part

    AGITATOR SHAFT SUB-ASSEMBLY

    #30

    Case,gearing, and unit Diagram

    Agitator shaft sub-assembly

    Part #B-61471

    The manufacturer no longer makes this part, and there's no substitute part

    CAPACITOR AND SUPPORT ASSEMBLY (4160325)

    #40

    Motor and control Diagram

    Capacitor and support assembly (4160325)

    Part #B-85676

    The manufacturer no longer makes this part, and there's no substitute part

    SCREW - SPECIAL (5)

    #25

    Case,gearing, and unit Diagram

    Screw - special (5)

    Part #B103994

    The manufacturer no longer makes this part, and there's no substitute part

    SPRING-CONTROL PLATE

    #3

    Motor and control Diagram

    Spring-control plate

    Part #C-103995

    The manufacturer no longer makes this part, and there's no substitute part

    GROOV-PIN TYPE E, 3/32" X 3/4"

    #12

    Case,gearing, and unit Diagram

    Groov-pin type e, 3/32" x 3/4"

    Part #PG-7-5

    The manufacturer no longer makes this part, and there's no substitute part

    Symptoms common to all stand mixers

    Choose a symptom to see related stand mixer repairs.

    Main cause: worn carbon motor brushes
    Main cause: attachment clearance setting needs adjustment
    Main causes: phase control board failure, wiring connection problem, faulty electronic control board
    Main causes: bad wiring connections, faulty speed control plate, electronic control board failure
    Main causes: lack of electrical power, wiring failure, worn carbon motor brushes, bad drive motor, tripped overload switch, control problems
    Main causes: bad worm gear, damaged planetary gear assembly
    Main causes: bad lubricating grease, mixer sitting idle for weeks at a time, mixer running constantly for more than 30 minutes

    Repair guides common to all stand mixers

    These step-by-step repair guides will help you safely fix what’s broken on your stand mixer.

    September 20, 2015
    By Lyle Weischwill
    How to replace a stand mixer worm gear

    Here’s how to replace the worm gear in your stand mixer if it’s worn or damaged.

    Repair difficulty
    Time required
     30 minutes or less
    September 20, 2015
    By Lyle Weischwill
    How to replace a stand mixer phase control board

    The phase control board works with the governor and control plate to control motor speed. Replace the phase control board if defective.

    Repair difficulty
    Time required
     30 minutes or less
    September 1, 2015
    By Lyle Weischwill
    How to replace stand mixer motor brushes

    If the carbon brushes are worn and damaged, replace them using these steps.

    Repair difficulty
    Time required
     15 minutes or less

    Articles and videos common to all stand mixers

    Use the advice and tips in these articles and videos to get the most out of your stand mixer.

    January 18, 2016

    How to use a multimeter to test electrical parts video

    By Sears PartsDirect staff

    Learn how to use a multimeter to check for wiring problems in an appliance that's not working

    December 1, 2015

    5 secrets for getting great stand mixer results

    By Sears PartsDirect staff

    Find out five tips and techniques to help get the most out of your stand mixer.

    September 1, 2015

    Stand mixer common questions

    By Sears PartsDirect staff

    These common questions and answers can help you make the most of your stand mixer.