Kenmore Elite 11096762700 dryer Parts

Yes. Kenmore Elite is Kenmore’s premium line, and the Kenmore Elite dryer model 11096762700 is built to deliver higher-end performance and convenience features compared with standard Kenmore dryers (more cycle/option choices, sensor-based drying, and upgraded care features). See the 11096762700 owner's manual for the exact feature set on your dryer.

Kenmore Elite typically focuses on better fabric care, more automation, and a more refined user experience.

Common high-end traits you’ll see on Elite dryers include:

• Sensor drying to help prevent over-drying and reduce wrinkles
• More cycles and modifiers for different fabric types and load sizes
• Convenience features such as end-of-cycle signal settings
• Maintenance guidance built into the care section (lint screen, interior cleaning, accumulated lint)
• Optional pedestal compatibility for added height and storage (where supported)

A “high-end” dryer is usually about better results with less guesswork. Sensor-based drying and expanded cycle options help protect clothes, improve consistency, and can reduce re-drying loads.

Premium dryers still use wear parts (rollers, idler pulley, blower wheel, thermistor). If your dryer is noisy, not tumbling smoothly, or drying inconsistently, we often start by inspecting common wear components and airflow.

Helpful starting points:

• Clean the lint screen every load and check venting for restrictions
• Listen for thumping/squealing (often rollers or idler pulley)
• Watch for long dry times (often airflow or heat control issues)

Last updated: February 2026

The Kenmore Elite dryer model 11096762700 is a super-capacity dryer in the 7.5 cu. ft. class. For the exact capacity listing tied to your unit’s configuration, we recommend confirming it in the 11096762700 owner’s manual.

Capacity is usually listed in the specifications section or on the model/serial label details referenced by the manual.

• Check the specifications section in the 11096762700 owner’s manual
• Compare the model number on your dryer’s label to the manual’s covered model series
• If your dryer is stacked or installed in a tight space, confirm clearance requirements at the same time
• Use capacity as a guide for load size (overloading reduces airflow and drying performance)

A 7.5 cu. ft. class Kenmore Elite dryer typically handles larger loads (for example, bulky towels or mixed loads) better than standard-capacity units, as long as airflow and venting are good.

Knowing the capacity helps us match cycles and load size to the dryer’s airflow design, which improves drying results and helps reduce wear on drum support components like the support WPW10314173.

Last updated: February 2026

On the Kenmore Elite dryer model 11096762700, the model number is on the model and serial number plate. We typically find it inside the door opening on the cabinet frame (around the top or side), and sometimes on the inside surface of the door. Use the 11096762700 owner's manual as a quick reference for label locations and service info.

• Open the dryer door and inspect the cabinet frame at the top edge.
• Check the cabinet frame on the left and right sides of the door opening.
• Look on the inside of the door itself (near the hinge or latch side).
• Wipe dust off the label; the print can be faint.
• Take a photo of the plate so you can zoom in and read it clearly.

The plate usually lists model and serial information together. On gas models like this Kenmore Elite, the plate is also used for key rating information referenced in the manual.

We use the exact model number to match the correct Kenmore parts list for your dryer, including common wear items like the dryer idler pulley 279640 and drum support components. One digit off can pull up a different series with different rollers, belts, or controls.

Last updated: February 2026

On the Kenmore Elite 11096762700 dryer, a blown thermal fuse typically stops the dryer from running at all (it opens the motor circuit). If your drum still turns but you have no heat, the issue is usually a power supply problem (one leg of power) or a heating system fault, not a blown thermal fuse. See the 11096762700 owner's manual for model-specific troubleshooting steps.

• Confirm the dryer is plugged into a grounded 3-prong outlet.
• Check the house fuses or breaker; a tripped breaker or blown fuse can let the motor run but prevent heat.
• Make sure the door fully latches; if it does not latch, the control can beep and the dryer will not start.
• Press and hold Start for 2 to 5 seconds (some loads and settings require a firm press).
• For gas models, verify the gas shutoff valve is open.

The manual notes that you can have a turning drum with no heat when a household fuse is blown or a circuit breaker is tripped (the heater may not be getting full power).

A thermal fuse is a safety device designed to prevent overheating. If it is blown, we treat it as a sign to also check airflow restrictions (lint buildup, crushed vent) so the replacement fuse does not blow again.

Depending on whether your 11096762700 is gas or electric, these parts are commonly checked during heating complaints:

• Dryer thermistor WP8577274 (temperature sensing)
• Dryer radiant sensor WP338906 (gas burner flame sensing)
• Igniter 279311 (gas ignition)

Last updated: February 2026