Kenmore Elite 66517059400 dishwasher Parts

Your Kenmore Elite dishwasher’s model number is printed on the model and serial number label located just inside the door opening. Open the door and look along the tub frame edge; the label lists both the model number and serial number for identification and parts matching (for example, 66517059400).

Where to look on model 66517059400

On this Kenmore Elite dishwasher, the label is typically easy to spot once the door is open.

• Open the dishwasher door fully
• Check the tub frame just inside the door (commonly along the left side)
• Look for a sticker or metal tag labeled “Model” and “Serial”
• Write the model number exactly as shown (all digits)
• Take a clear photo of the label for reference when ordering parts

For a diagram of the dishwasher features and label location, use the 66517059400 owner's manual.

Why the exact model number matters

Kenmore Elite dishwashers can look similar across multiple series, but parts like the door seal, heating element, and circulation pump can vary by model. Using the exact model number helps us match the correct replacement parts and installation details.

Examples of parts that can be model-specific

• Door seal and other gaskets
• Heating element
• Drain hose routing and connection style
• Control panel and console components
• Dishrack style and roller/track hardware

Quick reference: model number vs. serial number

Label item	What it tells you	When we use it
Model number	The exact dishwasher design/version	Always, for correct parts lookup
Serial number	The unit’s production identifier	Sometimes, for production changes

Ordering parts once you have the model number

After you confirm the model number, you can order replacement parts from the parts list for your dishwasher model, or search by model number on Sears PartsDirect.

Last updated: February 2026

To reset your Kenmore Elite dishwasher model 66517059400, we clear the current cycle and options by using CANCEL/DRAIN, then restart the cycle with START/RESUME. This stops a stuck cycle, clears indicator lights, and gets the control ready for a fresh start.

Quick reset steps (most common)

• Press CANCEL/DRAIN once.
• Close the door fully (the door must be closed for the unit to drain).
• Let the dishwasher run the drain cycle (up to about 2 minutes, if needed).
• Select your desired cycle and options again.
• Press START/RESUME.

For the exact button names and indicator behavior on your console, follow the steps in the owner's manual.

If the controls seem “locked”

This model uses a control lock feature that can make the keypad look unresponsive.

• Press and hold HEATED DRY for 4 seconds to toggle the lock.
• When locked, pressing other pads typically makes the lock light flash.

What to do if START/RESUME is flashing

A flashing START/RESUME light usually means the door was opened mid-cycle or power was interrupted.

• Make sure the door is fully closed and latched.
• Press START/RESUME to continue.
• If you pressed START/RESUME with the door open, close the door and press START/RESUME again.

Reset options: what each one does

Action	What it resets	When to use it
CANCEL/DRAIN	Clears cycle and options; drains water if needed	Stuck cycle, wrong cycle selected, lights need clearing
Control lock toggle (HEATED DRY 4 sec)	Enables or disables keypad lock	Buttons do not respond
Motor auto-reset	Motor may reset itself after overload	Humming, stalled wash action, then it restarts

Why it matters

Resetting the cycle the right way prevents starting a new wash with leftover water, uncleared options, or a paused drain. It also helps you avoid misdiagnosing a normal drain or lock condition as a failed electronic control.

If you need replacement parts related to draining or washing performance (like a hose, motor, or heater), order from the parts list for model 66517059400 on this page or search by model at Sears PartsDirect.

Last updated: February 2026

For Kenmore Elite dishwasher model 66517059400, the installation guide shows a standard built-in footprint: 23-7/8 inches wide and about 24-1/2 inches deep. Plan for a minimum 34 inches of countertop-to-floor opening height (it can fit 33-7/8 inches if the wheels are removed). See the installation guide for the exact cutout and clearance details.

Model 66517059400 size and opening requirements

These are the key measurements we use when planning cabinet fit and leveling:

• Width (dishwasher): 23-7/8 in (60.6 cm)
• Depth (dishwasher): 24-1/2 in (62.2 cm)
• Minimum opening height: 34 in (86.4 cm) measured from the lowest point under the countertop
• Reduced opening height option: 33-7/8 in (86.0 cm) by removing the rear wheels
• Built-up floor note: the unit fits a 33-3/4 in minimum opening in some built-up floor situations when set up and shimmed correctly

Quick reference table

Measurement	What it means	What to plan for
23-7/8 in width	Dishwasher body width	Standard 24 in cabinet opening width
24-1/2 in depth	Dishwasher body depth	Allow room for hoses and wiring behind
34 in min height	Cutout height under countertop	Most common target opening height
33-7/8 in height	Reduced-height fit	Possible with wheel removal

Why the opening height matters

The height spec is what prevents installation problems like the tub rubbing the countertop, the leveling legs running out of adjustment, or the motor area contacting the floor. We also recommend keeping drain lines, water lines, and electrical wiring routed so they do not touch the motor or legs.

Tips before you measure

• Measure the opening at the front and back of the cabinet.
• Measure height from the lowest point on the underside of the countertop.
• Check for tile lips, screws, or brackets that intrude into the opening.
• If the floor is uneven, plan on careful leveling and shimming.
• Leave slack for the drain hose and water supply line so the dishwasher can slide in without kinking.

If you need replacement installation hardware or common fit-related parts (like a drain hose), you can order parts for model 66517059400 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Yes, it’s usually worth repairing a Kenmore Elite dishwasher like model 66517059400 when the problem is a common wear item (seal, hose, heater, rack parts) and the tub is in good shape; repairs typically cost far less than replacement and restore normal cleaning and drying performance.

Quick way to decide (repair vs. replace)

Use these checkpoints to make a clear call:

• Repair when the issue is a leak at the door, poor drying, or a drain problem tied to a serviceable part.
• Repair when the dishwasher is cleaning well overall and only one system is failing (heat, drain, rack, vent).
• Repair when you can confirm the symptom in troubleshooting and the fix is straightforward.
• Replace when multiple major systems are failing at once (wash motor plus control plus leaks).
• Replace when the stainless tub or inner door panel is leaking from rust-through (the manual describes long-term leak coverage on stainless tub models).

For model-specific troubleshooting steps and care guidance, use the owner's manual.

Common repairs that are often “worth it” on this model

These are frequent, fixable problems that typically respond well to parts replacement:

• Not draining or slow draining: check the drain path and consider a new dishwasher drain hose 8269144A.
• Poor drying or no heat: a failed heater can cause wet dishes; consider the heater element WPW10082892.
• Door leaks: inspect the door seal area; a worn seal can cause drips and moisture escape.
• Water left in tub due to wash system issues: circulation or pump problems can point to a motor or pump repair.
• Rack rust or damage: replacing a rack can be more cost-effective than living with peeling coating.

Cost-to-benefit guide

Repair type	Typical impact	Usually worth it?
Drain or leak repair (hose, gasket, seal)	Stops water issues, prevents cabinet damage	Yes
Heating/drying repair (heater)	Restores drying and helps cleaning	Yes
Wash motor/pump repair	Restores wash pressure and cleaning	Often
Multiple major failures	High total cost, more downtime	No

Why it matters

A targeted repair keeps your Kenmore Elite 66517059400 running efficiently, avoids repeat wash cycles, and prevents secondary damage (like moisture under the unit). Regular cleaning and maintenance also reduces strain on the pump, heater, and drain system.

If you decide to move forward, we list model-matched replacement parts on this page, and you can also search by model number on Sears PartsDirect.

Last updated: February 2026

Yes. We still offer replacement parts for Kenmore dishwashers, including the Kenmore Elite 66517059400, as long as the specific part is available. The key is matching parts to your exact model number so items like door seals, drain hoses, and heating elements fit and work correctly.

How to find the right part for Kenmore Elite 66517059400

Use your full model number (66517059400) and then match the part by name and ID.

• Confirm the model number from the rating label before ordering
• Look up the part by symptom (leak, no drain, not heating, door won’t close)
• Match the part ID exactly (letters and numbers)
• Compare the part name to what you are replacing (for example, “dishwasher drain hose”)
• Use the diagrams and part list to avoid ordering a similar looking part

Common Kenmore dishwasher parts you can replace

These are examples of parts we show for model 66517059400 that are commonly replaced during normal repairs:

• Dishwasher drain hose 8269144A for draining problems or leaks at the hose
• Heater element WPW10082892 for poor drying or water not heating
• Gasket W11196317 for door leaks (seal issues)
• Silverware basket W10807920 if the basket is cracked or missing

Quick “symptom to part” guide

Symptom	What to check first	Example part on this model
Water on floor at the door	Door seal and alignment	Gasket/door seal parts such as gasket W11196317
Dishwasher won’t drain	Drain hose routing and clogs	Dishwasher drain hose 8269144A
Dishes not drying	Heater circuit and rinse aid use	Heater element WPW10082892
Poor wash performance	Chopper and pump circulation	Dishwasher chopper assembly (if equipped)

Why it matters

Kenmore dishwashers often have multiple versions that look similar, so ordering by model number prevents fit issues and repeat repairs. For model-specific part locations and access steps, we recommend using the 66517059400 owner's manual and the installation guide.

You can order replacement parts for your Kenmore Elite 66517059400 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026