Owner’s manual
Error Codes
How do you find the cubic feet of a Kenmore refrigerator?
To find the cubic feet (capacity) of your Kenmore Elite side-by-side refrigerator model 10657702703, we recommend checking the capacity listed in the owner's manual. If you need to calculate it yourself, measure the usable interior space and convert cubic inches to cubic feet.
Option 1: Find capacity by model information
The most accurate way is to use the model number and look up the stated capacity.
- Confirm the model number on the rating label inside the fresh food section
- Check the specifications section in the owner's manual
- Use the stated capacity for comparisons (shopping, moving, food storage planning)
Option 2: Calculate cubic feet from interior measurements
If you cannot locate the listed capacity, you can calculate an estimate from measurements.
- Empty the compartment you are measuring (refrigerator side or freezer side)
- Measure width x height x depth of the usable interior space (in inches)
- Multiply those numbers to get cubic inches
- Divide by 1,728 to convert to cubic feet
- Repeat for the other compartment and add them together for a total estimate
Quick conversion table
| What you have | What to do | Result |
|---|---|---|
| Inches (W x H x D) | Multiply | Cubic inches |
| Cubic inches | Divide by 1,728 | Cubic feet |
Tips to get a more realistic number
Manufacturer capacity is usually measured differently than “usable space,” so your tape-measure result can be lower.
- Measure to the inside walls, not to the front of shelves or bins
- Exclude door bins if you want a strict “main cavity” number
- For the freezer, account for the ice maker housing if it reduces usable space
- Use the same method each time if you are comparing refrigerators
Why it matters
Cubic feet helps you estimate how much food your refrigerator and freezer can hold, and it is also useful for planning power-outage storage needs (the manual references freezer space when discussing dry ice amounts).
Last updated: February 2026
What model is my Kenmore Elite refrigerator?
Your Kenmore Elite refrigerator’s model number is printed on the appliance’s rating label; for this unit, the model is 10657702703. You will typically find that label inside the fresh food compartment or freezer compartment, or behind the lower kickplate. For diagrams and exact label locations, use the 10657702703 owner's manual.
Where to look for the model number label
Check these common spots on Kenmore side-by-side refrigerators:
- Inside the refrigerator compartment on a side wall (often near the crisper area)
- Inside the freezer compartment on a side wall
- On the inner door frame (refrigerator or freezer door)
- Behind the lower toe grille or kickplate (near the floor)
- Near the ceiling of the fresh food section (less common)
What the label looks like (and what to copy)
The rating label usually includes multiple identifiers. Copy them exactly as shown:
- Model number (example format: 106.57702703 or 10657702703)
- Serial number (helps match production run and revisions)
- Electrical ratings (volts/amps) and sometimes refrigerant information
Quick ID guide
| Item on label | Why it matters | Example |
|---|---|---|
| Model number | Ensures parts fit your exact refrigerator | 10657702703 |
| Serial number | Helps confirm version changes within a model | (varies) |
| Product type | Confirms you have a side-by-side layout | Elite side-by-side |
Why it matters for parts and troubleshooting
Kenmore model numbers can look similar, but small differences change which parts fit. Once you confirm 10657702703, you can match the correct refrigerator water filter, ice maker, door gasket, or control parts for your exact configuration.
Examples of model-matched parts on this refrigerator
- Genuine Kenmore refrigerator water filter EDR3RXD1 (water and ice filtration)
- Refrigerator ice maker 2198597 (ice production)
- Refrigerator water inlet valve assembly WPW10159839 (water supply to dispenser and ice maker)
Last updated: February 2026
Where is the model number on a Kenmore side by side refrigerator?
On the Kenmore Elite side-by-side refrigerator model 10657702703, the model number is printed on the appliance identification label inside the fresh food (refrigerator) compartment, typically along a side wall near the front. Use the exact model number from that label when ordering parts or checking specifications in the owner's manual.
Where to look first (fastest checks)
- Open the refrigerator door and check the left or right interior wall near the front edge
- Look around the crisper drawer area (side wall just above or beside the drawers)
- Check near the top interior wall close to the temperature control housing (if equipped)
- If you do not see it in the refrigerator section, check the freezer compartment side wall
What the label looks like and what to write down
The ID label usually includes both a model number and a serial number. For parts lookup, the model number is the key.
| Item on label | What it’s used for | Example format |
|---|---|---|
| Model number | Matching parts and diagrams | 10657702703 |
| Serial number | Production details and service history | Letters and numbers |
Why it matters
Kenmore side-by-side refrigerators often have similar-looking doors, shelves, ice makers, and water filter housings across multiple models. Using the exact model number helps us match the correct replacement parts, such as a water filter, ice maker, or door gasket, the first time.
Tip for parts and maintenance
Once you confirm the model number, keep it handy when replacing common items like the genuine Kenmore refrigerator water filter EDR3RXD1 or troubleshooting ice and water issues.
Last updated: February 2026
How to tell if a Kenmore refrigerator compressor is bad?
A bad compressor on your Kenmore Elite side-by-side refrigerator model 10657702703 usually shows up as poor cooling with the unit running a lot, repeated clicking as it tries to start, or the compressor staying very hot while temperatures in the fresh food and freezer sections keep rising. Use the checks in the 10657702703 owner's manual to rule out power and control issues first.
Quick symptoms that point to a compressor problem
- Refrigerator and freezer both warm (not just one section)
- Compressor tries to start, then clicks off (often repeats every few minutes)
- Unit runs almost constantly but never reaches set temperature
- Compressor shell is very hot to the touch after running (use caution)
- You hear normal fan noise but cooling performance is still poor
Rule out common non-compressor causes first
Before treating it as a compressor failure, we recommend these basic checks because they can mimic compressor problems:
- Power and outlet: Confirm the cord is plugged into a grounded 3-prong outlet and the outlet works (the manual calls this out as a first check).
- Controls: Make sure the temperature controls are turned on and set correctly.
- Door openings and warm room: The manual notes longer run times are normal with a high-efficiency compressor, especially with frequent door openings, warm room temps, or a large food load.
- Give it time after setup: After installation or moving, allow 24 hours for full cool-down.
What a technician tests to confirm a bad compressor
Compressor diagnosis is electrical and sealed-system based. Typical confirmation steps include:
- Measuring compressor amperage draw during start and run
- Checking start components (relay/capacitor) and wiring connections
- Testing compressor motor winding resistance and checking for shorts to ground
- Verifying the sealed system can build pressure and move refrigerant
If the compressor is confirmed failed on this model, the replacement part listed for this unit is the refrigerator compressor W10139460.
Normal vs. problem sounds (helpful comparison)
| What you notice | Often normal | More likely a problem |
|---|---|---|
| Low hum while running | Yes | No |
| Intermittent buzzing/clicking | Sometimes (valve/controls) | Yes, if it repeats with no cooling |
| Runs longer than older fridge | Yes (high-efficiency design) | Only if temps never recover |
| Both sections warming up | No | Yes |
Why it matters
A compressor is the heart of the cooling system. Misdiagnosing it can lead to unnecessary sealed-system work when the real issue is power, controls, airflow, or a failed start component.
Last updated: February 2026
What are the common problems with Kenmore Elite refrigerators?
Common problems on the Kenmore Elite 10657702703 side-by-side refrigerator include warm temperatures from blocked airflow, ice maker or dispenser issues, water leaks, and defrost-related frost buildup. Many of these start with restricted air circulation, a clogged water filter, or a failing fan or defrost component; our owner's manual covers airflow and control basics.
Most common symptoms and what usually causes them
- Not cooling or uneven temps: blocked air vents, dirty condenser area, evaporator fan problems, or a defrost system issue
- Frost buildup on the freezer back wall: defrost heater, thermostat, or airflow restrictions
- Ice maker not making ice: water supply problem, clogged filter, or ice maker failure
- Water dispenser slow or no water: clogged filter, filter cap not sealing, or inlet valve issue
- Water leaking: frozen or clogged defrost drain, loose water tubing, or valve seepage
Quick checks we recommend first (safe, no special tools)
- Confirm vents are clear: This model relies on airflow between freezer and fresh food sections; blocking vents can cause temperature and moisture problems.
- Give temperature changes time: After adjusting controls, allow 24 hours for temperatures to stabilize.
- Replace the water filter on schedule: A restricted filter can reduce water flow and affect ice production.
- Listen for normal vs. abnormal sounds: Some popping and water-drain sounds during defrost are normal; loud grinding or squealing points to a fan or motor issue.
Parts that commonly fix these problems
| Problem | Common part involved | Example part for model 10657702703 |
|---|---|---|
| Slow water, weak ice production | Water filter | Genuine Kenmore refrigerator water filter EDR3RXD1 |
| No ice production | Ice maker assembly | Refrigerator ice maker 2198597 |
| Frost buildup, warm fridge section | Defrost system | Refrigerator defrost heater WP2323198 or refrigerator bi-metal thermostat WPW10225581 |
| Warm temps, poor circulation | Evaporator fan | Refrigerator evaporator fan motor WP2315549 |
| Leaks at dispenser/valve area | Water supply components | Refrigerator water inlet valve assembly WPW10159839 or refrigerator water tube 8201597 |
Why it matters
On a side-by-side like the Kenmore Elite 10657702703, airflow and defrost performance control both sections. When vents are blocked or the defrost system cannot clear frost, cold air cannot move properly, so you get warm temps, moisture, and ice maker complaints at the same time.
Last updated: February 2026
