Kenmore Elite 66514743N512 dishwasher Parts

On the Kenmore Elite dishwasher model 66514743N512, error code F2E2 means the control is not communicating correctly with the user interface (keypad/display). This is usually caused by a loose wiring connection, moisture or corrosion at a connector, or a failing control or interface.

• Reset power: turn the dishwasher off at the breaker for 1 minute, then restore power.
• Make sure the door is fully closed and latched; a poor latch can interrupt control signals.
• If the code returns, run the dishwasher’s built-in diagnostics or error history steps listed in the 66514743N512 owner’s manual.
• If the dishwasher recently had a spill or heavy steam event, let it dry out fully before retesting.
• If buttons do not respond or respond incorrectly, treat it as a user interface issue.

If the door is not latching consistently, replacing the latch is a common fix for “won’t start” and control communication symptoms on this platform. For this model, we often see the dishwasher door latch as a practical first part to evaluate: dishwasher door latch WPW10653840.

F2E2 is not a wash performance code; it is a control communication fault. If the controls cannot reliably “talk” to each other, the dishwasher may not start, may stop mid-cycle, or may ignore button presses.

Last updated: January 2026

The Kenmore Elite dishwasher model 66514743N512 is a standard built-in dishwasher designed for full-size place settings, not a cubic-foot capacity like a washer. Most Kenmore 665-series dishwashers hold about 12 to 14 place settings depending on rack configuration and how you load it; confirm the exact rating in the 66514743N512 use and care guide.

Dishwasher capacity is typically listed as place settings (plates, bowls, cups, utensils), not volume.

Common capacity factors include:

• Upper rack height and adjustability
• Tine layout and fold-down sections
• Silverware basket size and placement
• Large-item space (pots, pans, baking sheets)
• How tightly items are nested

We recommend these loading habits to get the most usable capacity while keeping spray arms clear:

• Load plates and large items on the lower rack facing inward.
• Keep tall items from blocking the detergent dispenser door.
• Angle bowls and cups so water drains; avoid “nesting.”
• Place utensils mixed (not all spoons together) for better wash coverage.
• Make sure racks roll smoothly and sit level; worn adjusters can cause poor loading and spray interference.

If the upper rack won’t stay level or won’t adjust, the dishwasher rack adjuster W10712395 is a common fix on this platform.

Knowing the correct capacity helps you choose the right cycle, avoid overloading (which causes poor cleaning and drying), and reduce strain on rack components like rollers and adjusters.

Last updated: January 2026

To hard reset (reset the control) on Kenmore Elite dishwasher model 66514743N512, we use the control reset procedure: stop the cycle, then press and hold CANCEL/DRAIN twice to reset the control, then choose a new cycle. The exact steps are shown in the 66514743N512 owner's manual.

• Open the door slightly to stop the cycle.
• Wait for spraying to stop, then open the door completely.
• If the Add a Dish indicator is lit, add items if needed.
• Press START/RESUME.
• Press and hold CANCEL/DRAIN twice to reset the control.
• Select the new cycle and options.

After the control reset, start the new selection the same way the dishwasher normally starts.

• Press START/RESUME.
• Close the door within 3 seconds.
• If you hear beeping and it does not start, press START/RESUME again and close the door within 3 seconds.

A true control reset clears a stuck cycle and gets the electronic control ready to accept a fresh cycle and option selection, which is the fastest way to recover from a mid-cycle glitch.

Last updated: January 2026

Kenmore Elite dishwashers are typically rated in the low-40s to low-50s dBA, depending on the exact model and cycle options. For Kenmore Elite model 66514743N512, use the 66514743N512 owner’s manual to confirm the published sound rating for your specific unit.

We recommend checking these spots in the 66514743N512 owner’s manual:

• The “Features” or “Model information” pages near the front
• Any “Specifications” or “Performance” section
• The model and serial label reference section (sometimes points to spec details)
• The back pages where service and technical information is grouped

Dishwasher noise is usually listed as dBA (A-weighted decibels). Lower numbers sound quieter.

A change in noise level is often caused by loading, filtration, or a drain issue, not the original dBA rating.

• Make sure spray arms are not hitting tall pans, utensils, or the rack
• Clean the filter area and remove labels, glass, or food debris
• Confirm racks roll smoothly and sit level (worn adjusters can rattle)
• Listen for when the noise happens (wash vs. drain) to narrow the cause

If the noise is strongest during drain-out, a worn drain component can be involved; the dishwasher drain pump WPW10348269 is one part that handles draining on this model.

The published dBA rating helps you compare dishwasher quietness across models. Troubleshooting a new or sudden noise is different; the timing of the noise during the cycle points to the wash system, racks, or drain system.

Last updated: January 2026