Kenmore Elite 79572069212 refrigerator Parts

A Kenmore Elite refrigerator like model 79572069212 typically lasts 10 to 15 years. With consistent maintenance (cleaning coils, keeping door seals tight, and changing filters on schedule), many units reach the upper end of that range before major sealed-system repairs become more common.

Typical lifespan and what affects it

Most bottom-mount refrigerators land in a similar life range, but these factors make the biggest difference:

• Condenser cleanliness: Dusty coils make the compressor run hotter and longer.
• Door seal condition: Air leaks cause longer run times and temperature swings.
• Airflow inside the cabinet: Overpacking blocks vents and stresses the cooling system.
• Water system upkeep: A clogged filter can reduce dispenser flow and affect ice production.
• Room conditions: Hot garages and tight built-ins shorten component life.

Maintenance checklist that extends life

We recommend these habits for Kenmore Elite bottom-mount models:

• Vacuum the condenser area regularly (more often with pets).
• Keep doors closing squarely; clean and inspect gaskets.
• Set temps to typical targets: 37°F fresh food, 0°F freezer.
• Replace the water filter on schedule; use the Kenmore refrigerator water filter 9690 AGF80300801 when it matches your housing.
• Level the refrigerator so doors self-close and seals compress evenly.

Repair vs. replace: a practical guide

When a refrigerator is older, the decision usually comes down to the type of repair.

Situation	What it usually means	Typical next step
Warm temps, loud running, dirty coils	High workload on cooling system	Clean coils, verify airflow
No ice or weak water flow	Filter or valve issue	Filter first, then diagnose valve
Not cooling and compressor won’t start	Major cooling system problem	Professional diagnosis; compare cost

If you are pricing parts for a repair, you can order model 79572069212 replacement parts from the parts list for this model, or search by model number on Sears PartsDirect.

Why it matters

Knowing the expected lifespan helps you plan: routine maintenance can delay expensive failures (compressor, evaporator, condenser), and it also helps you decide when a repair is worth it versus investing in a newer refrigerator.

For model-specific care and cleaning intervals, follow the 79572069212 owner's manual.

Last updated: February 2026

Your Kenmore Elite refrigerator’s model number is printed on the rating label inside the cabinet. On model 79572069212, you will typically find it on an inside wall of the fresh food section, on an inside wall of the freezer, or behind the lower crisper drawer area. Use the exact model number to match parts and the correct manual.

Where to look for the model number label

Check these common locations first (use a flashlight and look for a white or silver sticker/plate):

• Inside the fresh food compartment on a side wall (often near the top)
• Inside the freezer compartment on a side wall or back wall
• On the wall behind the lower crisper drawers (remove drawers to see it)
• Along the door frame area (open the door and look around the perimeter)
• Behind the kick plate or lower front grille (if your unit has one)

What the label looks like and what to write down

The rating label usually includes several identifiers. Record them exactly as shown:

• Model number (example format: 795.72069212 or 79572069212)
• Serial number (helps confirm production run and correct revisions)
• Electrical ratings (volts/amps) for service reference

Quick ID checklist

Item to capture	Why it matters
Model number	Ensures the parts list matches your exact refrigerator
Serial number	Helps confirm the correct version when parts changed over time
Brand line (Kenmore Elite)	Confirms product family for manuals and diagrams

Why it matters

Kenmore Elite refrigerators can look similar across multiple model series, but parts like the refrigerator water filter, door switch, or ice maker assembly can vary by model. Using the exact model number prevents ordering the wrong component.

Next step once you find it

• Use the model number to pull the correct diagrams and part list for your refrigerator
• For part ordering, start with the parts list for model 79572069212, or search by model on Sears PartsDirect
• For label location illustrations and model/serial formatting, check the 79572069212 owner's manual

Last updated: February 2026

Common problems on Kenmore Elite model 79572069212 bottom-mount refrigerators include weak or uneven cooling, frost buildup that blocks airflow, unusual fan or compressor noise, and water or ice dispenser issues (slow flow, leaks, or no ice). We use the 79572069212 owner's manual to match symptoms to checks and parts.

Most common symptoms and what they usually point to

• Not cooling or warm fresh food section: dirty condenser coil, airflow restriction, evaporator issue, or compressor problem
• Frost buildup on the back wall or in the freezer: defrost sensor or defrost system issue
• Loud humming, buzzing, or rattling: condenser fan area, evaporator area, or compressor/start components
• Water leaking or puddles: drain system issue, water tubing connection, or inlet valve seepage
• No ice or slow water dispensing: clogged water filter, inlet valve problem, or dispenser switch issue

Quick checks we recommend before replacing parts

1. Confirm temperatures: set refrigerator to about 37°F and freezer to about 0°F.
2. Check airflow: do not block vents with food packages.
3. Clean heat-exchange areas: inspect and clean the condenser coil area if dusty.
4. Inspect door closing and gaskets: poor sealing drives frost and temperature swings.
5. For dispenser problems: replace the water filter first, then test flow.

Parts that commonly solve these problems (when symptoms match)

Symptom	Common part to inspect/replace	Example part on this model page
Slow water, bad taste/odor, low ice production	Water filter	Genuine Kenmore refrigerator water filter 9690 AGF80300801
No water to dispenser/ice maker, valve buzzing	Water inlet valve	Lg refrigerator water inlet valve AJU72992603
Frost buildup, defrost errors, warm temps	Defrost sensor	Refrigerator defrost sensor assembly 6615JB2005R
Warm temps with poor heat rejection	Condenser coil	Refrigerator condenser coil ACG73645004
Clicking/humming with no cooling	Compressor system	Refrigerator compressor TCA38091801

Why it matters

Cooling, frost, and water/ice symptoms often overlap. A clogged filter can mimic a valve problem, and frost from a defrost failure can mimic a “not cooling” complaint by blocking airflow. Using the symptom checks in the manual helps prevent replacing the wrong part.

Ordering the right parts

We recommend matching parts by model 79572069212 and confirming the part ID before ordering. You can order from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Kenmore Elite refrigerator model 79572069212 is a bottom-mount refrigerator; the exact cabinet and overall dimensions (width, height, depth with and without handles, and required clearances) are listed in the dimension diagram in the 79572069212 owner's manual. Use those published measurements for planning a cutout, delivery path, and door swing.

What “size” can mean (and what to check)

Before you plan cabinetry or delivery, confirm these measurements from the manual and your tape measure:

• Overall width at the widest point (doors can be wider than the cabinet)
• Overall height to the top hinge (leveling legs can change final height)
• Overall depth in two ways: without handles and with handles
• Clearance behind and above for airflow
• Door swing clearance next to walls or an island

Typical ranges for bottom-mount refrigerators (planning only)

If you are rough-planning space before you pull the exact diagram, most bottom-mount units in this style fall in these ranges; always use the manual’s numbers for model 79572069212.

Measurement	Typical range	Notes
Width	29 to 36 in.	Common “classes” include 30, 33, and 36 in.
Height	67 to 71 in.	Measure to hinge cap; allow leveling adjustment
Depth	29 to 35 in.	Handles and rear clearance can add space needs

Why it matters

Using the exact dimension diagram prevents delivery problems, doors that cannot open fully, and restricted airflow that can cause warm temperatures and higher energy use.

Related parts you may need after installation

If you are connecting water or troubleshooting low flow after moving the refrigerator, these model-compatible parts are commonly involved:

• Genuine Kenmore refrigerator water filter 9690 AGF80300801 for taste and flow
• Refrigerator water inlet valve AJU74532703 if the dispenser or ice maker is not filling
• Refrigerator water tubing MJU62070602 if you find a cracked or leaking line

You can order replacement parts from the parts list for model 79572069212, or search by model number on Sears PartsDirect.

Last updated: February 2026