Kenmore 59669973011 refrigerator Parts

Yes for most households: a bottom-mount refrigerator like Kenmore model 59669973011 keeps fresh-food items at eye and waist level, so daily-use foods are easier to reach while the freezer stays in a lower pull-out drawer.

When a bottom-mount is the better choice

• You cook often and want produce, dairy, and leftovers at comfortable reach
• You prefer wide refrigerator shelves over bending to reach a crisper
• You like freezer organization in sliding baskets and lower drawers
• You want fewer “stoop and search” trips for everyday items

When another style can be better

• You use the freezer more than the refrigerator (a top-freezer can feel more convenient)
• You want the lowest upfront cost (top-freezer models are often simpler)
• You need the most freezer space for bulky items (some side-by-sides fit tall items better)

Quick comparison

Style	Best for	Tradeoffs
Bottom-mount	Everyday fresh-food access, ergonomic use	Freezer is lower, you bend to reach it
Top-freezer	Value, simple layout	Fresh food is lower, more bending
Side-by-side	Narrow door swing, tall freezer items	Narrower shelves in both sections

Why it matters

Refrigerator style affects comfort, food visibility, and how often doors stay open. Better access to fresh food typically means faster “in and out,” which helps temperature stability and reduces strain on cooling components.

Parts note for this model

If you are maintaining or repairing your Kenmore 59669973011, you can order model-matched parts from the parts list for this refrigerator, or search by model on Sears PartsDirect. Common examples on this model include the refrigerator electronic control WPW10503278 and the refrigerator evaporator fan motor WPW10128551.

Last updated: February 2026

To tell what Kenmore refrigerator model you have, look for the model and serial tag inside the refrigerator compartment (often on a side wall, ceiling, or near the crisper area) or on the frame behind the toe grille. Once you find it, match the model number exactly (for example, 59669973011) when searching parts on Sears PartsDirect.

Where to look for the model tag

Check these common locations on Kenmore refrigerators:

• Inside the fresh food section on the left or right side wall
• On the ceiling of the fresh food section near the light housing
• Behind or beside the crisper drawers (you may need to slide drawers out)
• On the cabinet frame behind the toe grille (kick plate) at the bottom front
• Along the door frame area (open the door and inspect the cabinet edge)

What the model number should look like

Kenmore model numbers are usually a long number string. For parts accuracy, we recommend copying it exactly as printed.

What you see on the tag	What to do with it	Why it matters
Model number (example: 59669973011)	Use it to search parts and diagrams	Ensures correct fit and compatibility
Serial number	Keep it for service history and age reference	Helps identify production details
Revision or suffix (if shown)	Include it when possible	Can affect part variations

Why it matters for ordering the right parts

Even small model-number differences can change which door gasket, control board, or fan motor fits. When you search by the exact model, you can quickly narrow down to the correct components for your Kenmore refrigerator.

Examples of parts that commonly require an exact model match

• Refrigerator electronic control WPW10503278
• Refrigerator evaporator fan motor WPW10128551
• Refrigerator gasket panel WPW10436247

Quick tip if the sticker is hard to read

If the label is worn, take a clear photo with your phone and zoom in; also check for a second tag behind the toe grille.

Last updated: February 2026

The most common problems we see on Kenmore refrigerators like model 59669973011 are cooling issues, ice maker and water dispensing problems, leaks, frost buildup, and unusual noises. Many are caused by airflow restrictions, dirty coils, worn door gaskets, or failing fan motors and controls.

Most common symptoms and what they usually point to

• Not cooling or warm temperatures: dirty condenser coils, failed evaporator fan, failed condenser fan, or a control issue
• Freezer cold but fridge warm: blocked air vents, evaporator fan problem, frost-clogged evaporator area
• Water leaking inside or under the unit: clogged/iced defrost drain, door left ajar, or ice maker fill issues
• Excess frost or ice buildup: door seal leak, frequent door openings, defrost system trouble
• Noisy operation (buzzing, rattling, clicking): fan blade rubbing ice, failing fan motor, start device/capacitor issues

Quick checks we recommend before replacing parts

1. Set temps correctly: fridge about 37°F, freezer about 0°F.
2. Check airflow: make sure packages are not blocking vents in the refrigerator or freezer.
3. Clean condenser coils: dust buildup commonly causes poor cooling and longer run times.
4. Inspect door seals: look for gaps, tears, or areas that do not grip the cabinet.
5. Listen for fans: you should typically hear a steady fan sound when the compressor is running.

Parts that commonly solve these problems on model 59669973011

Problem area	Common fix	Example part for this model
Warm fridge/freezer, weak airflow	Replace evaporator fan components	Refrigerator evaporator fan motor WPW10128551 or refrigerator evaporator fan blade WP2169142
Warm temps, compressor struggles to start	Replace start components	Refrigerator compressor start device WPW10194431 or refrigerator run capacitor WPW10662129
Erratic temps or unresponsive controls	Replace control board	Refrigerator electronic control WPW10503278
Door not sealing, frost, moisture	Replace gasket	Refrigerator gasket panel WPW10436247

Why it matters

Cooling, frost, and leak symptoms often get worse quickly in a bottom-mount refrigerator because restricted airflow and poor sealing force longer run times. That can lead to food spoilage, heavier frost, and extra wear on the compressor and fans.

Helpful DIY guidance

• If you’re seeing a display code or suspect an electronic fault, use our Kenmore 111 model bottom freezer refrigerator error codes reference to narrow the issue.
• If you’re ordering parts beyond the list for model 59669973011, we recommend searching by model number on Sears PartsDirect.

Last updated: February 2026

On a Kenmore Elite refrigerator, dH (often shown as Er dH) indicates a defrost heating problem: the refrigerator is not sensing normal temperature rise during the defrost cycle, so frost can build up and airflow can drop. For model 59669973011, start by checking for heavy frost on the evaporator cover and listening for the evaporator fan.

What you’ll notice when dH is active

• Refrigerator section warming up while the freezer still seems cold
• Frost or ice buildup on the back wall or behind the rear freezer panel
• Fan noise changes (fan hitting ice, or no airflow)
• Controls may beep or seem less responsive until the condition clears

Quick checks we recommend (safe, no tools)

1. Power reset: unplug for 5 minutes, then restore power.
2. Check airflow: make sure vents are not blocked by food packages.
3. Look for frost: heavy frost behind the freezer’s rear panel points to a defrost system issue.
4. Door seal check: a leaking gasket can cause excess frost; see how to fix a fridge door seal.

Parts that commonly cause a defrost heating (dH) issue

On this model, these parts are often involved in cooling and defrost-related symptoms:

• Refrigerator electronic control WPW10503278 (can affect defrost timing and system operation)
• Refrigerator evaporator fan motor WPW10128551 (moves cold air; frost buildup can stop airflow)
• Refrigerator evaporator fan blade WP2169142 (can crack or slip, reducing airflow)

Symptom-to-part guide

What you observe	Most likely area	What to do next
Heavy frost, weak airflow	Defrost system	Inspect for ice buildup; plan a defrost-system diagnosis
No fan sound, fridge warm	Evaporator fan	Check fan operation; replace fan motor if not running
Random beeping, odd behavior	Control	Consider control board diagnosis/replacement

Why it matters

When defrost heat is not working correctly, frost blocks the evaporator and the refrigerator can’t circulate cold air. Fixing the root cause prevents warm temperatures, food spoilage, and repeat icing.

You can order replacement parts for Kenmore 59669973011 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026