Can you still get parts for a Kenmore dishwasher?
Yes. We still carry replacement parts for many Kenmore dishwashers, including model 58712332510A; the key is matching parts by the full model number so you get the correct fit for items like the door latch, water inlet valve, drain pump, and detergent dispenser.
Use the model number 58712332510A (exactly as shown on the rating label) and confirm the part by name and part ID.
- Look up parts by model number, not just “Kenmore dishwasher”
- Match the symptom to the system (fill, wash, drain, door, controls)
- Compare the part name and part ID before ordering
- Use diagrams in the 58712332510A owner's manual to confirm location and access
- If the dishwasher will not run, check the door closing and latch engagement first
Here are a few frequently needed parts for this model:
| What it affects | Common replacement part | What you may notice |
|---|---|---|
| Door closing and starting | Dishwasher door latch 5304535183 | Door will not latch, unit will not start, cycle stops when bumped |
| Filling with water | Dishwasher water inlet valve 5304482406 | No fill, slow fill, humming during fill |
| Draining | Dishwasher drain pump 5304483444 | Standing water, poor drain, drain motor noise |
| Detergent dispensing | Dishwasher detergent dispenser assembly 5304509278 | Detergent door not opening, poor cleaning |
Kenmore dishwashers are built in multiple design families, and parts like pumps, latches, and valves vary by platform. Using 58712332510A ensures you get the correct OEM-style replacement and avoid returns due to mismatched mounting, wiring, or hose connections.
If you are installing or removing the dishwasher to access parts, follow the 58712332510A installation guide for safe mounting and electrical connection basics (junction box cover, strain relief, and securing brackets).
Last updated: February 2026
Is it worth repairing a Kenmore dishwasher?
Yes, repairing a Kenmore dishwasher is usually worth it when the unit is under 10 years old and the problem is a common, contained failure (like a latch or fill issue) rather than a major motor or control repair. For Kenmore model 58712332510A, we use the repair cost, age, and symptom severity to decide.
- Repair when the estimate is under 50% of the cost of a comparable new dishwasher.
- Repair when the issue is isolated (won’t fill, won’t drain, won’t latch) and the tub is in good shape.
- Replace when multiple major systems are failing (leaks plus poor washing plus electrical issues).
- Replace when the dishwasher has chronic rusted racks, a damaged tub, or repeated flooding.
These are frequent fixes on dishwashers like the Kenmore 587 series and typically make sense if the rest of the machine is solid:
- Door won’t close or start: check the dishwasher door latch 5304535183
- No fill or slow fill: check the dishwasher water inlet valve 5304482406
- Not draining: check the dishwasher drain pump 5304483444
- Detergent door not opening: check the dishwasher detergent dispenser assembly 5304509278
- Poor cleaning from weak spray: inspect spray arms and filters (cleaning steps are in the 58712332510A use and care guide)
| Situation | Typical impact | Usually worth repairing? |
|---|---|---|
| Door won’t latch, unit won’t run | No-start condition | Yes |
| Won’t fill or fills slowly | Poor wash, may stop mid-cycle | Yes |
| Won’t drain | Standing water, odor | Yes |
| Pump and motor or control failure | High parts and labor | Sometimes |
A dishwasher that won’t latch, fill, or drain often has a single failed part, so a targeted repair restores normal operation quickly. Following the correct service steps also helps prevent safety issues like tip-over risk during service and installation.
- Confirm the dishwasher is fully installed and secured (installation steps are in the 58712332510A installation guide)
- Clean the filter system regularly; a clogged filter reduces cleaning efficiency
- Verify the symptom is consistent (every cycle) versus occasional (loading, detergent, water temperature)
Last updated: February 2026
How do I find the model number on my 58712332510A?
The model number for your Kenmore dishwasher is printed on the serial plate inside the dishwasher. Open the door and look around the inner door frame or tub opening; that label lists both the model and serial number. See the 58712332510A owner's manual for the exact label location.
- Open the dishwasher door fully.
- Check the serial plate inside the dishwasher (typically on the tub rim near the door opening).
- Look for fields labeled Model and Serial.
- Write the numbers down exactly as shown (including letters and any dashes).
- If the label is hard to read, use a flashlight and take a close-up photo.
Your Use & Care Guide covers models listed as 587.1233* (the asterisk indicates a color number). Your full model, 58712332510A, is the complete identifier you should use when ordering parts like a door latch, water inlet valve, or drain pump.
| Label item | What it’s used for | Example for your unit |
|---|---|---|
| Model number | Matching parts and diagrams | 58712332510A |
| Serial number | Identifying production run details | Unique to your dishwasher |
Using the exact model number helps us match the correct Kenmore dishwasher parts and diagrams the first time, especially for fit differences tied to color codes or production changes.
Last updated: March 2026





