Kenmore 58712332510A dishwasher Parts

Yes. We still carry replacement parts for many Kenmore dishwashers, including model 58712332510A; the key is matching parts by the full model number so you get the correct fit for items like the door latch, water inlet valve, drain pump, and detergent dispenser.

How to find the right part for your Kenmore model

Use the model number 58712332510A (exactly as shown on the rating label) and confirm the part by name and part ID.

• Look up parts by model number, not just “Kenmore dishwasher”
• Match the symptom to the system (fill, wash, drain, door, controls)
• Compare the part name and part ID before ordering
• Use diagrams in the 58712332510A owner's manual to confirm location and access
• If the dishwasher will not run, check the door closing and latch engagement first

Common parts customers replace on 58712332510A

Here are a few frequently needed parts for this model:

What it affects	Common replacement part	What you may notice
Door closing and starting	Dishwasher door latch 5304535183	Door will not latch, unit will not start, cycle stops when bumped
Filling with water	Dishwasher water inlet valve 5304482406	No fill, slow fill, humming during fill
Draining	Dishwasher drain pump 5304483444	Standing water, poor drain, drain motor noise
Detergent dispensing	Dishwasher detergent dispenser assembly 5304509278	Detergent door not opening, poor cleaning

Why the model number matters

Kenmore dishwashers are built in multiple design families, and parts like pumps, latches, and valves vary by platform. Using 58712332510A ensures you get the correct OEM-style replacement and avoid returns due to mismatched mounting, wiring, or hose connections.

Pro tip before ordering

If you are installing or removing the dishwasher to access parts, follow the 58712332510A installation guide for safe mounting and electrical connection basics (junction box cover, strain relief, and securing brackets).

Last updated: February 2026

Yes, repairing a Kenmore dishwasher is usually worth it when the unit is under 10 years old and the problem is a common, contained failure (like a latch or fill issue) rather than a major motor or control repair. For Kenmore model 58712332510A, we use the repair cost, age, and symptom severity to decide.

Quick rule of thumb (repair vs. replace)

• Repair when the estimate is under 50% of the cost of a comparable new dishwasher.
• Repair when the issue is isolated (won’t fill, won’t drain, won’t latch) and the tub is in good shape.
• Replace when multiple major systems are failing (leaks plus poor washing plus electrical issues).
• Replace when the dishwasher has chronic rusted racks, a damaged tub, or repeated flooding.

Common repairs that are often cost-effective

These are frequent fixes on dishwashers like the Kenmore 587 series and typically make sense if the rest of the machine is solid:

• Door won’t close or start: check the dishwasher door latch 5304535183
• No fill or slow fill: check the dishwasher water inlet valve 5304482406
• Not draining: check the dishwasher drain pump 5304483444
• Detergent door not opening: check the dishwasher detergent dispenser assembly 5304509278
• Poor cleaning from weak spray: inspect spray arms and filters (cleaning steps are in the 58712332510A use and care guide)

Cost and impact comparison

Situation	Typical impact	Usually worth repairing?
Door won’t latch, unit won’t run	No-start condition	Yes
Won’t fill or fills slowly	Poor wash, may stop mid-cycle	Yes
Won’t drain	Standing water, odor	Yes
Pump and motor or control failure	High parts and labor	Sometimes

Why it matters

A dishwasher that won’t latch, fill, or drain often has a single failed part, so a targeted repair restores normal operation quickly. Following the correct service steps also helps prevent safety issues like tip-over risk during service and installation.

Before you decide, check these basics

• Confirm the dishwasher is fully installed and secured (installation steps are in the 58712332510A installation guide)
• Clean the filter system regularly; a clogged filter reduces cleaning efficiency
• Verify the symptom is consistent (every cycle) versus occasional (loading, detergent, water temperature)

Last updated: February 2026

The model number for your Kenmore dishwasher is printed on the serial plate inside the dishwasher. Open the door and look around the inner door frame or tub opening; that label lists both the model and serial number. See the 58712332510A owner's manual for the exact label location.

Where to look (fast checklist)

• Open the dishwasher door fully.
• Check the serial plate inside the dishwasher (typically on the tub rim near the door opening).
• Look for fields labeled Model and Serial.
• Write the numbers down exactly as shown (including letters and any dashes).
• If the label is hard to read, use a flashlight and take a close-up photo.

What the model number looks like for this series

Your Use & Care Guide covers models listed as 587.1233* (the asterisk indicates a color number). Your full model, 58712332510A, is the complete identifier you should use when ordering parts like a door latch, water inlet valve, or drain pump.

Label item	What it’s used for	Example for your unit
Model number	Matching parts and diagrams	58712332510A
Serial number	Identifying production run details	Unique to your dishwasher

Why it matters

Using the exact model number helps us match the correct Kenmore dishwasher parts and diagrams the first time, especially for fit differences tied to color codes or production changes.

Last updated: March 2026