Kenmore 79571024010 refrigerator Parts

A bottom-mount refrigerator like Kenmore model 79571024010 keeps the fresh-food section at a more comfortable, eye-level height, so you reach everyday items with less bending. The freezer stays below, which many owners prefer for ergonomics and organization (see the 79571024010 owner's manual).

Key advantages you will notice day to day

• Less bending for fresh food: produce, drinks, and leftovers are easier to grab.
• Better visibility: shelves and door bins are closer to eye level, so items are easier to find.
• Freezer organization: pull-out drawers and baskets help separate frozen foods.
• Energy habits: quicker access to fresh food can reduce door-open time.
• Easier shelf customization: adjustable shelves help fit tall items and group foods efficiently.

How to get the most benefit from the layout

Use these setup habits to make a bottom-mount design work even better:

• Keep frequently used items on the middle shelves.
• Store raw meats in a contained bin on a lower refrigerator shelf to help prevent drips.
• Avoid blocking air vents with large containers.
• Group similar foods together to reduce door-open time.
• Clean door gaskets and shelves regularly to help maintain consistent temperatures.

Bottom-mount vs top-freezer: quick comparison

Feature	Bottom-mount refrigerator	Top-freezer refrigerator
Fresh-food access	Higher, easier reach	Lower, more bending
Freezer access	Lower drawers	Upper swing door
Organization style	Drawer-based freezer	Shelf-based freezer

Why it matters

Most households use the refrigerator compartment far more than the freezer. Putting fresh food at a comfortable height reduces strain and can make it easier to keep food visible, organized, and used before it expires.

Last updated: January 2026

On Kenmore refrigerator model 79571024010, the SY EF (sometimes shown as 5Y EF) error code points to a problem in the evaporator fan circuit. In most cases, the issue is the evaporator fan motor, its wiring/connector, or the electronic control that powers the fan.

What to check first (quick troubleshooting)

• Unplug the refrigerator for 1 minute, then restore power and see if the code returns.
• Listen for the evaporator fan: it should run when the compressor is running and the doors are closed.
• Check for ice buildup on the rear freezer panel; heavy frost can block the fan.
• Inspect the fan area for a loose connector, damaged wire, or fan blade rubbing.
• Confirm the freezer drawer is fully closed and the door switch is working.

Parts commonly involved

If the fan is not running or is noisy, these parts are common suspects for this model:

• Lg refrigerator evaporator fan motor 4681JB1027C
• Refrigerator evaporator fan blade 5901JA1021A
• Refrigerator electronic control board EBR67348003

Symptom-to-likely-cause guide

What you notice	Most likely cause	What we recommend
Fan is silent, freezer warming	Failed fan motor or no power to fan	Check fan for obstruction; test/replace fan motor
Loud buzzing or scraping	Fan blade hitting ice or shroud	Defrost ice buildup; replace damaged blade
Code returns after reset, fan runs intermittently	Wiring/connector issue or control problem	Inspect harness connections; consider control board
Heavy frost on freezer back wall	Defrost system problem leading to fan restriction	Check defrost heater and airflow paths

Why it matters

The evaporator fan moves cold air through the freezer and into the fresh food section. When the fan circuit fails, temperatures rise, food can thaw, and the refrigerator may run longer than normal.

Where to find model-specific guidance

For component locations, panel removal, and troubleshooting steps, use the 79571024010 use and care guide. For deeper diagnostics, the Kenmore 795 model bottom freezer refrigerator error codes guide helps confirm what the display code means and what to check next.

Last updated: January 2026

On Kenmore refrigerator model 79571024010, leaking underneath most often happens when defrost water is not draining correctly into the drain pan, or when a water supply connection is seeping. Start by checking for a clogged defrost drain and then inspect the water line and inlet valve area.

Quick checks we recommend first

• Look for a sheet of ice or standing water on the freezer floor (common sign of a clogged defrost drain).
• Check the drain pan underneath for overflow, cracks, or being out of position.
• Inspect the water line connections at the back for slow drips.
• If the unit has an ice maker, confirm the water supply shutoff valve is fully tightened and not weeping.
• Verify the refrigerator is level front-to-back and side-to-side so water flows to the drain correctly.

Most common causes (and what to do)

What you see	Likely cause	What to do next
Water under the front, freezer floor icy	Defrost drain clogged or frozen	Thaw the drain area, then flush the drain with warm water until it flows freely
Water near the back/bottom	Water line connection leaking	Tighten fittings, re-seat tubing, and re-check for drips
Leak only when dispensing water or making ice	Inlet valve or tubing issue	Inspect tubing for splits and test the valve for seepage
Drain pan full after heavy humidity/defrost	Normal defrost water, airflow issue, or pan shifted	Make sure the pan is seated correctly and condenser area is clean

Parts that commonly relate to leaks on this model

If you find the leak is coming from the water supply system, these model-matched parts are often involved:

• Refrigerator drain tube 5251JA3003D
• Refrigerator water tubing MJU62070602
• Lg refrigerator water inlet valve MJX41178908

Why it matters

Water under a bottom-mount refrigerator can damage flooring and can also lead to ice buildup that blocks airflow, causing warm temperatures in the refrigerator compartment. Fixing the drain path or water supply seep quickly prevents repeat leaks.

Manual guidance to follow

For cleaning and maintenance steps (including areas like condenser coils and general care that can reduce overflow and moisture issues), use the 79571024010 manual.

Last updated: January 2026