Samsung WF45K6200AZ/A2-11 washer Parts

To read a Samsung washer model number, start by copying the exact model from the appliance’s model tag (for this washer: WF45K6200AZ) and then match that full number when looking up parts and manuals. The letters and numbers identify the series, features, and version so you get compatible parts.

Where to find the model number (and why it matters)

On Samsung washers, the model number is printed on the model tag (rating plate). Using the full model number prevents ordering the wrong control board, door lock, or drain pump because small suffix differences can change the part list.

• Look around the door opening on the cabinet frame (front-load washers commonly place the tag there)
• Check the back panel area if you do not see it at the door opening
• Write down the model number exactly, including letters and numbers
• Also record the serial number; it helps date and version the unit
• Use the model number to confirm diagrams and procedures in the WF45K6200AZ owner’s manual

How to interpret the characters (practical breakdown)

Samsung model numbers are a code. You do not need to decode every character to buy parts, but it helps you sanity-check what you wrote down.

Example chunk	What it typically indicates	Why you care
Brand prefix (often letters)	Product line identifier	Confirms it is a washer family
Middle digits/letters	Capacity/series and feature set	Helps match the correct parts list
Ending letters/numbers	Version, color, or revision	Often the difference between compatible and incompatible parts

Tips to avoid ordering the wrong part

When you search parts for WF45K6200AZ, match the model tag exactly and then verify the part description against your symptom.

• If the washer will not drain, confirm the drain system before replacing a pump motor
• If the door will not lock or unlock, verify the lock switch and wiring connections
• If the washer shakes or bangs, check suspension and leveling first
• If you see an error code, use an error-code guide to narrow the failure

Common part categories people mix up

Symptom	Common category	Example part type
No fill / slow fill	Water inlet	Inlet valve
No drain	Drain system	Drain pump motor
Door will not lock	Door latch system	Door lock switch

Why it matters

Samsung washers use multiple revisions within the same series; the exact model number is the fastest way to ensure the right diagrams, troubleshooting steps, and replacement parts for your washer.

Last updated: February 2026

The Samsung WF45K6200AZ washer has a 5.2 cu. ft. capacity, which is sized for larger, family loads and bulky items. For the exact way Samsung lists capacity for your unit (and any spec notes), check the WF45K6200AZ owner's manual.

What 5.2 cu. ft. means for everyday loads

A 5.2 cu. ft. Samsung front-load washer is built to handle bigger loads while still needing proper loading to prevent vibration and out-of-balance conditions.

• Wash bulky towels and larger mixed loads in fewer cycles
• Leave some space at the top of the drum so items can tumble
• Distribute heavy items (like jeans) evenly around the drum
• Use the correct cycle (Bedding, Heavy Duty, Normal) for the load type
• Avoid packing items tightly; that reduces cleaning and rinsing performance

Quick load guidance (practical, not weight-based)

Load type	Good fit for 5.2 cu. ft.	Best practice
Towels	Large loads	Mix towel sizes to reduce imbalance
Bedding	Bulky items	Use Bedding cycle; do not overstuff
Mixed clothes	Family loads	Keep items loose for better tumbling

Where to confirm the spec on your washer

Use these common places to verify capacity and related specs (spin speed, electrical, water pressure):

• Specifications section in the WF45K6200AZ owner's manual
• Model and rating label around the door opening or inside the door area
• Product listing details tied to your full model suffix

Why it matters

Using the correct capacity helps you load the washer properly, which improves cleaning, reduces vibration, and helps prevent balance-related errors. If you run into a balance code, our Samsung front load washer dc error code guide walks through the most effective fixes.

Last updated: February 2026

A Samsung front load washer like model WF45K6200AZ typically lasts 10 to 15 years with normal household use and basic maintenance. Heavy daily use, chronic overloading, and poor drainage shorten life; routine cleaning and correct detergent use extend it. See the WF45K6200AZ owner's manual for the maintenance schedule.

What affects washer lifespan most

• Load size and balance: frequent overloading strains the drive system, tub bearings, and suspension.
• Drain health: coins, lint, and debris that restrict draining overwork the pump.
• Water quality: hard water increases scale and can affect valves and seals.
• Door boot care: leaving moisture trapped promotes odor and premature rubber wear.
• Vibration control: an unlevel washer accelerates wear on shocks and the spin basket.

Maintenance that adds years (simple routine)

• Run the washer’s tub-clean cycle regularly; wipe the door glass and gasket afterward.
• Leave the door slightly open between loads to dry the door boot.
• Use HE detergent and avoid excess soap (oversudsing stresses the drain system).
• Check pockets and use a mesh bag for small items to reduce drain clogs.
• Keep the washer level and stable; recheck leveling feet after moving.

Common “end-of-life” symptoms and likely areas

Symptom	What it often points to	What we usually check first
Loud banging or walking	Suspension wear or unlevel install	Leveling, then shocks
Won’t drain or drains slowly	Drain restriction or pump issue	Drain filter, then pump
Leaks at the door	Door boot or clamp issues	Boot condition and clamps
Won’t fill or fills slowly	Water supply or inlet valve	Screens/hoses, then valve

If you’re seeing severe vibration or a DC-type unbalance issue, follow our Samsung front load washer dc error code troubleshooting steps; it helps you correct loading and leveling problems before they damage components.

Why it matters

A front load washer’s most expensive repairs are usually tied to high-speed spin stress (suspension, basket, motor control) and water management (leaks and draining). Preventing vibration and keeping the drain path clear is the fastest way to protect the WF45K6200AZ over its full 10 to 15 year lifespan.

Last updated: February 2026

The most common issues we see with Samsung washers like model WF45K6200AZ are drain problems, out-of-balance vibration, and fill (no water/slow fill) problems. These symptoms usually trace back to maintenance items (filters, hoses) or a few high-wear parts such as the drain pump, inlet valve, and suspension components.

Most common problems (and what they look like)

• Won’t drain or drains slowly: water left in the tub, cycle stops before spin, “ND” type drain errors.
• Excessive shaking or banging: especially during spin; often worse with bulky loads.
• Won’t fill or fills slowly: long fill times, little to no water entering, “NF” type fill errors.
• Door won’t lock or won’t start: clicking at the door, cycle won’t begin.
• Leaks at the door: water around the front; can be from the door boot area.

Quick checks we recommend first

1. Reduce load size and redistribute bulky items (blankets, towels) before assuming a part failure.
2. Clean the drain pump filter and check the drain hose for kinks or clogs.
3. Verify water supply: both hot and cold valves fully open; inlet screens not clogged.
4. Level the washer: an unlevel front-load washer amplifies vibration and “DC” imbalance behavior.
5. Run the built-in diagnostics and error code steps in the WF45K6200AZ user manual.

Common parts tied to these symptoms (for WF45K6200AZ)

Symptom	Likely system	Example part on this model
Not draining	Drain system	Washer drain pump motor DC31-00178D
Not filling	Fill system	Washer water inlet valve DC62-30314K
Shaking/banging	Suspension	Samsung washer shock absorber DC66-00470A or DC66-00470B
Door won’t lock	Door lock	Washer door lock switch DC64-00519D

Why it matters

Catching drain, fill, and vibration problems early helps prevent secondary damage (like water leaks, repeated unbalanced spins, or control interruptions) and keeps cycle times and cleaning performance consistent.

Last updated: February 2026

The Samsung WF45K6200AZ is a full-size front-load washer; most washers in this class measure about 27 inches wide, 38 to 39 inches tall, and 31 to 34 inches deep (depth increases when you include the door). For the exact dimensions for your unit, use the WF45K6200AZ owner's manual.

Typical dimensions you can expect

These are the most common “fit” measurements customers use for laundry room planning:

• Width: ~27 in.
• Height: ~38 to 39 in.
• Depth (cabinet): ~31 to 34 in.
• Depth (with door open/clearance): plan extra space in front
• Capacity class: full-size (often marketed around 4.5 cu. ft. for similar Samsung models)

How to measure your washer correctly

If you are checking fit under a counter, in a closet, or next to a dryer, measure these points:

• Width: left side panel to right side panel
• Height: floor to the top of the cabinet (not the control panel angle)
• Depth: back panel to the front-most point (often the door)
• Clearance: space behind for hoses and venting air flow
• Door swing: confirm you can fully open the door without hitting a wall or dryer

Quick planning table (what to measure vs. why)

Measurement	What to include	Why it matters
Width	side-to-side cabinet	ensures it fits between walls/cabinets
Height	floor to top	confirms under-counter fit
Depth	cabinet and door	prevents a “sticks out” install
Rear clearance	hoses and drain	avoids kinked fill hoses and drain issues

Why it matters

Correct sizing prevents installation headaches like crushed fill hoses, poor drain routing, and door clearance problems. It also helps reduce vibration and noise by ensuring the washer sits level on a solid floor.

Last updated: February 2026