Kenmore Elite 79046379401 electric range Parts

Yes. Kenmore Elite is positioned as Kenmore’s higher-end line, and your Kenmore Elite electric range model 79046379401 is built with upgraded cooking features and a more premium fit and finish than standard Kenmore models. For the exact feature set on your range, use the 79046379401 owner's manual.

High end typically shows up as better cooking performance, more control options, and more convenience features compared with entry-level ranges.

Common “Elite” advantages include:

• More advanced oven control features (timed bake, delayed bake, lockout options)
• Convection cooking on many Elite models (fan-assisted baking)
• Dual radiant surface element capability on some cooktops
• More refined styling and control layouts
• Better overall cooking consistency when the oven is properly calibrated

Because “Elite” can vary by model and year, the fastest way to confirm what is included on 79046379401 is to match the features listed in the manual to what you see on the control panel.

Use these checks:

• Review the “Range features” section in the 79046379401 owner's manual
• Compare oven modes listed (Bake, Convection bake, Timed bake, Delayed time bake)
• Check whether your cooktop has a dual radiant element control
• Verify whether your model includes oven lockout and display options

Knowing whether your range is “high end” helps when you are comparing replacement parts (like an oven temperature sensor or bake element), choosing cookware settings, and using features like convection bake and timed baking correctly.

Last updated: January 2026

On the Kenmore Elite electric range model 79046379401, the PF code means power failure. It appears when the range is first plugged in or after an interruption in power; clear it by pressing CLEAR so you can reset the clock and resume normal oven operation using the steps in the 79046379401 owner's manual.

• Press CLEAR once; PF should disappear after a short delay.
• Set the clock (the range may not run timed features correctly until the clock is set).
• If PF returns, reset power at the breaker for about 3 minutes, then restore power.
• If the display stays blank or PF keeps coming back, check the house circuit (range needs a stable 240V supply).
• If you recently moved the range or installed a new cord, inspect the power connection and terminal block area.

PF is not an oven temperature error; it is the control telling you it lost power. Clearing PF and resetting the clock restores normal control operation and helps you avoid issues with timed bake, delay start, and other electronic oven control features.

If PF repeats after you have stable power, these parts are commonly inspected during diagnosis:

• Terminal block 5304409888 (burned or loose connections can cause intermittent power)
• Power cord and strain relief (not model-specific parts listed here, but often involved)
• House breaker and receptacle (for a cord-connected range)

Last updated: January 2026

For Kenmore Elite electric range model 79046379401, the model and serial number are printed on the serial plate located on the oven front frame behind the oven door. On some versions, the serial plate is behind the storage drawer. See the 79046379401 owner's manual for the exact illustration.

Check these common serial plate locations for this Kenmore Elite range:

• Open the oven door and look along the front frame (the frame the door closes against)
• Focus on the left side of the oven front frame behind the door
• If you do not see it behind the door, pull out the storage drawer and look behind it (some models)
• Use a flashlight; the plate is often a small metallic or white label
• Write down the model number, serial number, and any lot number/letter shown

We use the full model number (like 79046379401) to match the correct Kenmore-compatible parts, diagrams, and wiring information. That prevents ordering the wrong bake element, oven temperature sensor, or control parts for your exact range configuration.

Last updated: January 2026

To reset the Kenmore Elite electric range model 79046379401, we recommend doing a basic control reset by turning power off at the breaker for 1 to 5 minutes, then restoring power and clearing any active cooking function. This restores normal operation after many control glitches.

• Breaker reset (best overall): Turn the range circuit breaker OFF for 1 to 5 minutes, then turn it back ON.
• Clear the control: Press CLEAR/OFF to cancel a bake, timed bake, self-clean, or warm cycle.
• Unlock the control/door: If the display shows a lock condition, press and hold CLEAR/OFF for 3 seconds to toggle the oven lockout.
• Wait for door unlock after self-clean: If a self-clean just ended, the door stays locked until the oven cools.
• Re-set the clock if needed after power is restored.

The oven lockout feature can make the range look like it needs a reset. On this model, the lockout is controlled by the CLEAR/OFF pad.

For the exact display messages and button names used on your control panel, follow the steps in the 79046379401 owner's manual.

If the oven heats but cooking results are consistently too hot or too cool, the fix is usually temperature adjustment, not a reset. This model allows calibration changes up to about 35°F in either direction using the control pads (details are in the manual).

A breaker reset clears temporary electronic faults; lockout and end-of-cycle beeps are normal control features. Calibrating temperature addresses baking accuracy without replacing parts like the oven temperature sensor.

Last updated: January 2026