Kenmore Elite 79046379401 electric range Parts

Yes. Kenmore Elite is positioned as Kenmore’s higher-end line, and your Kenmore Elite electric range model 79046379401 is built with upgraded cooking features and a more premium fit and finish than standard Kenmore models. For the exact feature set on your range, use the 79046379401 owner's manual.

What “high end” means for this Kenmore Elite range

High end typically shows up as better cooking performance, more control options, and more convenience features compared with entry-level ranges.

Common “Elite” advantages include:

• More advanced oven control features (timed bake, delayed bake, lockout options)
• Convection cooking on many Elite models (fan-assisted baking)
• Dual radiant surface element capability on some cooktops
• More refined styling and control layouts
• Better overall cooking consistency when the oven is properly calibrated

Quick comparison: Kenmore vs Kenmore Elite (typical)

Feature area	Standard Kenmore (typical)	Kenmore Elite (typical)
Oven features	Basic bake/broil	More modes (timed, delayed, convection on many models)
Cooktop options	Single elements	More dual/expandable element options
Controls	Basic	More settings and convenience features
Fit and finish	Standard	More premium look and feel

How to confirm what your 79046379401 includes

Because “Elite” can vary by model and year, the fastest way to confirm what is included on 79046379401 is to match the features listed in the manual to what you see on the control panel.

Use these checks:

• Review the “Range features” section in the 79046379401 owner's manual
• Compare oven modes listed (Bake, Convection bake, Timed bake, Delayed time bake)
• Check whether your cooktop has a dual radiant element control
• Verify whether your model includes oven lockout and display options

Why it matters

Knowing whether your range is “high end” helps when you are comparing replacement parts (like an oven temperature sensor or bake element), choosing cookware settings, and using features like convection bake and timed baking correctly.

Last updated: January 2026

On the Kenmore Elite electric range model 79046379401, the PF code means power failure. It appears when the range is first plugged in or after an interruption in power; clear it by pressing CLEAR so you can reset the clock and resume normal oven operation using the steps in the 79046379401 owner's manual.

How to clear PF and get the range working again

• Press CLEAR once; PF should disappear after a short delay.
• Set the clock (the range may not run timed features correctly until the clock is set).
• If PF returns, reset power at the breaker for about 3 minutes, then restore power.
• If the display stays blank or PF keeps coming back, check the house circuit (range needs a stable 240V supply).
• If you recently moved the range or installed a new cord, inspect the power connection and terminal block area.

Quick reference: what PF usually indicates

What you see	What it means	What to do first
PF flashing after outage	Power was interrupted	Press CLEAR, then set clock
PF keeps returning	Unstable power or loose connection	Reset breaker, check wiring/terminal block
PF plus oven not heating	Power issue or control problem	Verify supply, then troubleshoot heating circuit

Why it matters

PF is not an oven temperature error; it is the control telling you it lost power. Clearing PF and resetting the clock restores normal control operation and helps you avoid issues with timed bake, delay start, and other electronic oven control features.

Parts that are commonly involved when power issues persist

If PF repeats after you have stable power, these parts are commonly inspected during diagnosis:

• Terminal block 5304409888 (burned or loose connections can cause intermittent power)
• Power cord and strain relief (not model-specific parts listed here, but often involved)
• House breaker and receptacle (for a cord-connected range)

Last updated: January 2026

For Kenmore Elite electric range model 79046379401, the model and serial number are printed on the serial plate located on the oven front frame behind the oven door. On some versions, the serial plate is behind the storage drawer. See the 79046379401 owner's manual for the exact illustration.

Where to look on the range

Check these common serial plate locations for this Kenmore Elite range:

• Open the oven door and look along the front frame (the frame the door closes against)
• Focus on the left side of the oven front frame behind the door
• If you do not see it behind the door, pull out the storage drawer and look behind it (some models)
• Use a flashlight; the plate is often a small metallic or white label
• Write down the model number, serial number, and any lot number/letter shown

Quick location guide

What you can access	Most likely location	What you will see
Oven door	Left side of oven front frame behind the door	Model and serial plate label
Storage drawer	Behind the drawer (some models)	Model and serial plate label

Why it matters

We use the full model number (like 79046379401) to match the correct Kenmore-compatible parts, diagrams, and wiring information. That prevents ordering the wrong bake element, oven temperature sensor, or control parts for your exact range configuration.

Last updated: January 2026

To reset the Kenmore Elite electric range model 79046379401, we recommend doing a basic control reset by turning power off at the breaker for 1 to 5 minutes, then restoring power and clearing any active cooking function. This restores normal operation after many control glitches.

Quick reset options (most common)

• Breaker reset (best overall): Turn the range circuit breaker OFF for 1 to 5 minutes, then turn it back ON.
• Clear the control: Press CLEAR/OFF to cancel a bake, timed bake, self-clean, or warm cycle.
• Unlock the control/door: If the display shows a lock condition, press and hold CLEAR/OFF for 3 seconds to toggle the oven lockout.
• Wait for door unlock after self-clean: If a self-clean just ended, the door stays locked until the oven cools.
• Re-set the clock if needed after power is restored.

If the oven is “locked” (door won’t open or controls seem disabled)

The oven lockout feature can make the range look like it needs a reset. On this model, the lockout is controlled by the CLEAR/OFF pad.

Symptom	What it usually means	What to do
“DOOR LOCKED” shows or lock icon is on	Oven lockout is active	Press and hold CLEAR/OFF for 3 seconds
Door won’t open after self-clean	Normal cool-down lock	Let the oven cool; do not force the door
Beeping continues after cooking ends	End-of-cycle reminder	Press CLEAR/OFF

For the exact display messages and button names used on your control panel, follow the steps in the 79046379401 owner's manual.

When a “reset” is actually a temperature calibration

If the oven heats but cooking results are consistently too hot or too cool, the fix is usually temperature adjustment, not a reset. This model allows calibration changes up to about 35°F in either direction using the control pads (details are in the manual).

Why it matters

A breaker reset clears temporary electronic faults; lockout and end-of-cycle beeps are normal control features. Calibrating temperature addresses baking accuracy without replacing parts like the oven temperature sensor.

Last updated: January 2026