Kenmore Elite 11076972502 dryer Parts

To reset your Kenmore Elite dryer model 11076972502, we recommend doing a simple power reset: turn the dryer off, disconnect power for 1 to 5 minutes, then restore power and start a new cycle. This clears many temporary control and cycle glitches.

Quick reset steps

• Turn the Cycle Selector to Off.
• Unplug the dryer from the grounded 3-prong outlet (or switch the breaker off).
• Wait 1 to 5 minutes.
• Plug the dryer back in (or turn the breaker on).
• Select a cycle and press the PUSH TO START button.

If the dryer still will not start after a reset

These checks come straight from common start-up and troubleshooting steps for this style of Kenmore dryer:

• Confirm the dryer is plugged into a grounded 3-prong outlet.
• Check the house fuse or breaker; some dryers use two fuses/breakers for heat.
• Make sure the door is fully closed; a failed door switch can prevent starting.
• Verify you selected a cycle (some dial positions will not run until moved past Off).
• If you have a gas model, confirm the gas supply shutoff valve is open.

Parts that commonly affect starting

If power and settings are correct but the dryer still will not run, these model-compatible parts are common suspects:

Symptom	What to check	Model-compatible part
No response when you press Start	Start switch	Dryer push-to-start switch WP3977456
Dryer stops when door moves or won’t start with door shut	Door switch	Dryer door switch WP3406107
Runs but shuts down or behaves erratically	Temperature sensing	Dryer thermistor WP8577274

Why this matters

A reset is fast and safe, and it helps separate a one-time control hiccup from a real issue like a door switch failure, a bad start switch, or a power supply problem.

For cycle and operating details (including stopping and restarting), use the owner's manual.

Last updated: February 2026

A Kenmore dryer typically lasts 10 to 13 years. With consistent care (especially proper venting and regular lint removal), many Kenmore Elite dryers like model 11076972502 run longer because airflow stays strong and heat stays controlled. See the owner's manual for the maintenance schedule.

What affects dryer lifespan the most

• Venting quality and airflow: restricted exhaust makes the dryer run hotter and longer
• Lint removal: clean the lint screen every load; clean internal lint buildup periodically
• Load size and frequency: frequent heavy loads wear rollers, belt, and motor faster
• Heat system condition (gas models): weak ignition or cycling heat increases run time
• Noise and vibration: often signals drum support or idler wear

Maintenance schedule we recommend

The manual calls out lint removal intervals that directly support longer life.

Task	Good baseline	Why it matters
Clean lint screen	Every load	Keeps airflow high and drying times shorter
Clean inside exhaust vent	About every 2 years (more with heavy use)	Reduces overheating and long cycles
Clean inside dryer cabinet	About every 2 years (qualified person)	Prevents lint buildup around moving and heating parts

Parts that commonly wear as a dryer ages

If your 11076972502 is getting loud, taking longer to dry, or squealing, these are common wear items to check:

• Dryer repair kit 4392067 (often includes multiple wear components)
• Support WPW10314173 (drum support roller)
• Dryer idler pulley 279640
• Dryer blower wheel WP697772 (airflow and noise issues)

Why it matters

A dryer that is properly installed and vented dries faster and runs cooler. That reduces strain on the drive system (motor, rollers, idler) and helps you get the full expected service life from your Kenmore Elite dryer.

Last updated: February 2026

The model number for this Kenmore Elite dryer is 11076972502. You’ll find the complete model number on the model and serial label, which is typically located at the top inside the dryer door opening (door well); confirm it there before ordering parts or using troubleshooting steps from the owner's manual.

Where to find the model number on the dryer

Check these common locations on Kenmore dryers like model 11076972502:

• Top inside the dryer door opening (door well) on the cabinet frame
• On the door opening rim near the lint screen housing (varies by design)
• On a label behind the lower access panel (some configurations)
• On your purchase paperwork (helpful, but the label is the best source)

Why the exact model number matters

Kenmore model numbers can look similar, but small differences change which parts fit and which instructions apply.

• Ensures the correct replacement parts (switches, rollers, sensors) fit your dryer
• Helps match the right wiring diagram and troubleshooting steps
• Prevents ordering the wrong gas or drum components

Quick reference: model number vs. serial number

Item	What it tells you	Used for
Model number (11076972502)	Exact dryer design and parts list	Parts lookup, manuals, repair steps
Serial number	Production identifier and build details	Service history, warranty documentation

If you’re ordering parts after confirming the model

Once you confirm 11076972502, common wear items for this dryer include:

• Support WPW10314173 (drum support roller)
• Dryer idler pulley 279640 (belt tension pulley)
• Dryer repair kit 4392067 (often includes multiple drum support components)

Why it matters

Using the model label (not a similar-looking number from a listing or ad) prevents fit issues and repeat repairs, especially on drum support and drive components.

Last updated: February 2026