Installation guide
Owner’s manual
Error Codes
Is side by side better than a French door?
A side-by-side like the Frigidaire FRS6LF7JM5 is better when you want easy freezer access, strong door storage, and a narrower door swing; a French door is better when you want wider fresh-food shelves and more flexible refrigerator storage. The “better” choice depends on how you use the fridge day to day.
| Feature | Side-by-side (FRS6LF7JM5 style) | French door |
|---|---|---|
| Fresh-food space | Tall, narrower shelves | Wide shelves for platters and pizza boxes |
| Freezer access | Eye-level; easy to organize | Lower drawer; can be deeper |
| Door swing | Typically narrower swing | Often wider swing |
| Door storage | Usually excellent | Good, varies by design |
| Best for | Frozen-food heavy households | Fresh-food heavy households |
- You use the freezer daily and want items at eye level.
- Your kitchen has tighter clearances; side-by-sides often need less door swing.
- You like lots of door bins for drinks and condiments.
- You want a built-in look; this style is commonly designed to sit in cabinetry with small clearances.
Fit and airflow matter as much as layout. For side-by-side installations, we follow the clearance guidance and leveling steps in the installation guide.
- Plan for doors to fully open so drawers and bins can slide out.
- Allow typical clearances for air circulation (sides/top and rear).
- Level the cabinet so doors close and seal; a slight tilt back helps the doors self-close.
- Keep room temperature in a normal operating range; extreme heat or cold can hurt cooling performance.
Choosing the right door style reduces food waste and frustration. A side-by-side can feel more organized for frozen foods and daily grab items, while a French door can feel more spacious for fresh-food storage and wide containers.
Last updated: February 2026
Do side-by-side refrigerators have a freezer?
Yes. A side-by-side refrigerator like the Frigidaire FRS6LF7JM5 has a freezer compartment; the freezer and fresh-food sections run vertically next to each other behind two separate doors.
In a side-by-side design, the freezer is one full-height section of the cabinet, typically on the left side, with shelves and door bins for frozen food storage.
- Freezer and refrigerator compartments are side-by-side, not stacked
- Each compartment has its own door and gasket seal
- You can store frozen items on shelves and in door bins
- Many models also route ice through the freezer door to the dispenser
Side-by-side units usually trade wide shelf space for easier access to frozen foods at eye level.
| Feature | Side-by-side freezer | Top-freezer style (typical) |
|---|---|---|
| Access to frozen foods | Easier at mid-height | Often requires bending |
| Shelf width | Narrower | Wider |
| Door storage | Common and useful | Varies |
Knowing you have a dedicated freezer section helps when you are troubleshooting temperature issues, door sealing problems, or ice maker performance; freezer airflow and door sealing directly affect both freezing and ice production.
For model-specific layout and door adjustment details, use the installation guide.
Last updated: February 2026
How to defrost a side by side Frigidaire freezer?
To defrost the freezer on your Frigidaire FRS6LF7JM5 side-by-side refrigerator, we recommend using the normal (automatic) defrost system and clearing any heavy frost by safely unloading the freezer, turning the unit off, and letting the ice melt naturally; then restore power and temperatures per the installation guide.
- Move food to a cooler with ice; keep freezer door closed as much as possible.
- Turn the refrigerator off (unplug or switch off power at the breaker).
- Leave the freezer door open to let frost melt; place towels to catch water.
- Do not chip ice with sharp tools; it can puncture the evaporator and cause a sealed-system leak.
- Wipe the compartment dry, reinstall shelves/bins, then restore power.
- Set temperatures back to normal and allow 24 hours to stabilize.
During a defrost cycle, it is normal for cooling to pause while the system manages frost on the evaporator. After you restart, you may hear different “normal operating” sounds and see temporary temperature swings while the compressor and fans pull temperatures back down.
| Situation | What it usually means | What we recommend |
|---|---|---|
| Light frost film on back wall | Normal moisture and door openings | Monitor; no action needed |
| Heavy frost buildup returns quickly | Air leak or defrost airflow issue | Check door seal and vents |
| Water on floor after defrost | Meltwater overflow or drain issue | Use towels; check for recurring puddles |
Heavy frost is usually caused by warm, moist air leaking into the freezer or restricted airflow.
- Door not sealing fully (gasket torn, warped, or dirty)
- Door not level, causing gaps at the seal
- Door left ajar or frequent long door openings
- Packages blocking return vents inside the freezer
- Fan or airflow issue moving cold air through the evaporator area
If you find a damaged seal on this model, the matching gasket options on this page include the refrigerator door gasket (white) 241786013 and the Frigidaire refrigerator freezer door gasket, black 241786014.
Excess frost reduces airflow across the evaporator, which makes the compressor run longer, warms food, and can lead to ice maker and dispenser performance problems.
Last updated: February 2026
Can I look up Frigidaire parts by model number?
Yes. Looking up parts by model number is the most accurate way to get compatible replacement parts for your Frigidaire FRS6LF7JM5 side-by-side refrigerator because the parts list is tied to your exact configuration (doors, dispenser, ice maker, and water system).
Use the complete model number exactly as shown on the refrigerator’s data tag. For FRS6LF7JM5, match every letter and number.
Common places to check on a side-by-side refrigerator:
- Inside the fresh food compartment on a side wall
- Along the door frame when the door is open
- Near the crisper drawer area
- On the back of the cabinet (less common)
When you search by model number, you can quickly narrow to the right diagrams and parts categories (water filter, ice maker, door gasket, evaporator fan, and controls).
For this model, common part lookups include:
- Water filtration: refrigerator filter WF2CB
- Ice production components: ice maker mold 241798231
- Cooling airflow parts: refrigerator evaporator motor 808602602
- Door sealing parts: refrigerator door gasket (white) 241786013
Model-number lookup helps prevent ordering a part that looks similar but does not fit your refrigerator’s mounting points, wiring connectors, or water line connections.
| If you search by… | Result | Risk level |
|---|---|---|
| Model number (FRS6LF7JM5) | Exact parts list and diagrams | Low |
| Part description only (example: “Frigidaire water filter”) | Many possible matches | Medium to high |
| Visual match only | Often misleading across revisions | High |
Your installation instructions call out details like flushing the supply line, using a compression nut and ferrule (sleeve), and ensuring the water filter is fully seated. Those steps are model-relevant and are best followed from the installation guide and the owner's manual.
Last updated: February 2026
Where is the defrost timer on a Frigidaire side by side?
On the Frigidaire FRS6LF7JM5 side-by-side refrigerator, defrost timing is typically handled by an electronic control rather than a separate, easy-to-spot mechanical timer. Use the wiring diagram and component locations in the FRS6LF7JM5 owner's manual to identify the exact defrost control used on your unit.
These are the most common places you will find the defrost control or the controls that manage defrost:
- Inside the temperature control area in the fresh food section (control housing)
- Behind a rear access cover (control board area)
- In the machine compartment near the bottom rear (less common for user-access)
- In the freezer section behind the evaporator cover (you will see the evaporator and defrost wiring)
We recommend confirming whether your refrigerator uses a mechanical timer or an electronic defrost control before you start removing parts.
- Check the parts diagram for a listing that says “timer” or “defrost control”
- Look for a control board housing and multi-wire connectors (typical of electronic defrost)
- If you see a small round dial or a square timer module with a turning shaft, that is a mechanical timer
- Match wire colors and connector locations to the wiring diagram in the manual
| What you have | What it looks like | Typical symptom when it fails |
|---|---|---|
| Mechanical defrost timer | Small timer motor module, sometimes with a dial/shaft | Stuck in defrost or never enters defrost |
| Electronic defrost control | Circuit board with multiple connectors | Frost buildup, erratic defrost intervals |
If you chase a “defrost timer” that is not actually used on your FRS6LF7JM5, you can miss the real cause of frost buildup, warm temperatures, or airflow problems.
If the freezer evaporator is heavily frosted, these model-compatible parts are commonly involved:
- Refrigerator defrost bi-metal thermostat 5303918214 (senses evaporator temperature during defrost)
- Refrigerator evaporator fan blade 5308000010 (circulates air; weak airflow can mimic defrost trouble)
Last updated: February 2026
