Kenmore 6651677991 dishwasher Parts

Yes. We still carry replacement parts for many Kenmore dishwashers, including model 6651677991. The key is matching parts by the full model number so you get the correct fit for items like the door latch, drain hose, racks, and seals.

Use your Kenmore model number (6651677991) and compare the part name and part ID before ordering.

• Match the full model number from the rating label (usually on the tub frame near the door)
• Confirm the part’s function (drain, latch, rack, seal) matches your symptom
• Check for wear clues: cracks, swelling, rust, broken tabs, or loose mounting
• Replace mounting hardware if it is stripped or corroded
• If your dishwasher leaks, stop using it until the leak source is identified

These are examples of parts we commonly see replaced on this model.

Kenmore dishwashers are built with model-specific mounting points, electrical connectors, and hose routing. Using the exact model number (6651677991) helps prevent returns and avoids problems like leaks, poor washing, or a door that will not close.

If you’re troubleshooting a fault or flashing lights, use our error code help for Kenmore dishwashers: Kenmore 665 model dishwasher error codes.

Last updated: February 2026

Yes, repairing a Kenmore dishwasher model 6651677991 is usually worth it when the problem is a wear item (leak, door not latching, poor draining) and the repair cost stays well below the price of a comparable replacement; it is less worth it when multiple major components are failing at once.

• Repair is usually worth it for leaks, door issues, and drain hose problems.
• Repair is less worth it when you need multiple major repairs (for example, repeated motor or control failures) or the tub is damaged.
• If you are seeing an error code, start with Kenmore 665 model dishwasher error codes to narrow the failure to a specific system.

These are the types of parts we commonly see replaced on this Kenmore dishwasher:

• Door sealing issues: gasket WPW10509257
• Door won’t close or pops open: door latch WP3380854
• Drain leaks or poor draining: dishwasher drain hose WP3374077
• Small leak at a hose connection: clamp WP596669

A targeted repair keeps a solid Kenmore dishwasher running for years at a fraction of replacement cost, but chasing multiple unrelated failures can turn into repeated downtime and higher total spend.

Last updated: February 2026

The model number for your Kenmore dishwasher is printed on the appliance’s model and serial tag. On most Kenmore dishwashers like model 6651677991, you can find that tag on the tub frame around the door opening when you open the door.

Check these common locations in this order:

• Along the left or right side of the tub opening (vertical frame)
• Across the top edge of the tub opening (under the countertop lip)
• On the door edge itself (the inner edge of the door)
• Behind the lower toe panel area (less common)

The tag usually lists both a model number and a serial number.

Tip: Write the model number exactly as shown (including any dots), then use it to match parts such as the door latch WP3380854 or dishwasher drain hose WP3374077 to your exact build.

Kenmore dishwasher parts can look identical across multiple 665-series models, but mounting points, harness plugs, and revisions can differ. Using the full model number from the tag prevents ordering the wrong dishrack, gasket, or latch.

Last updated: March 2026