Kenmore Elite 10644423601 side-by-side refrigerator Parts

A Kenmore Elite refrigerator like model 10644423601 typically lasts 10 to 15 years. With good airflow, clean condenser coils, and tight door seals, many units reach the high end of that range; major sealed-system repairs often become more common as the unit ages.

Most side-by-side refrigerators follow a similar aging pattern:

• 0 to 5 years: Mostly minor issues (icemaker, dispenser, switches)
• 5 to 10 years: Wear items show up (fans, defrost components, water system leaks)
• 10 to 15 years: Higher chance of costly cooling-system or control problems
• 15+ years: Many still run, but efficiency and repair costs often drive replacement

We recommend these habits for Kenmore Elite side-by-side models:

• Vacuum and brush condenser coils regularly (dust buildup raises compressor workload)
• Keep door gaskets clean and sealing evenly (no gaps, no torn corners)
• Replace the water filter on schedule to protect the dispenser and icemaker
• Confirm the base grille area stays open for airflow
• Keep freezer vents clear so cold air can circulate to the refrigerator side

Knowing the typical lifespan helps you plan: if your 10644423601 is near 10 to 15 years old, it is smart to prioritize maintenance and weigh repair costs carefully, especially for cooling-system problems.

For model-specific care and maintenance intervals, use the 10644423601 owner's manual.

Last updated: January 2026

For Kenmore Elite model 10644423601, the installation information indicates it’s a 25 cu. ft. (694 L) size class. Use the 10644423601 installation guide to confirm the exact capacity listing and the matching cabinet and opening dimensions for your kitchen.

We recommend verifying capacity using the model and serial label and the product documentation.

• Check the model/serial label inside the fresh food compartment (typically on an interior side wall).
• Match the model number exactly: 10644423601.
• Review the “Model Size” table in the installation instructions (look for 25' (694 L)).
• If your unit is installed in a tight opening, confirm door swing and clearance requirements.
• Keep your purchase info with the documentation for future service reference.

“Cubic feet” is the approximate total interior storage volume; usable space varies with shelves, bins, and the ice maker.

Knowing the capacity helps when comparing replacement refrigerators, planning food storage, and choosing compatible accessories like a water filter. For this model, the manual also references a replacement filter order number (9030), which corresponds to the genuine Kenmore refrigerator water filter EDR3RXD1.

Last updated: January 2026

Yes. For Kenmore Elite refrigerator model 10644423601, the most reliable reset is a power reset: turn the controls to OFF (if your model has an OFF setting), unplug the refrigerator for 5 minutes, then plug it back in and return the temperature controls to your normal settings (see the 10644423601 owner's manual).

• Power reset (recommended): Controls to OFF (if available), unplug 5 minutes, plug back in.
• Control reset after service: After reconnecting power, set both compartments to a midpoint setting and allow cooling time.
• Ice maker reset (if the issue is ice): Turn the ice maker OFF, wait 1 minute, then turn it back ON.
• After a water hookup: Flush the water system before using the dispenser or ice maker.

1. Move the refrigerator or temperature control to OFF (if your control has an OFF position).
2. Unplug the refrigerator from the outlet.
3. Wait 5 minutes.
4. Plug it back in.
5. Set the refrigerator and freezer controls to the midpoint.
6. Confirm the compressor and interior lights are operating.

• Make sure air vents inside both compartments are not blocked by food packages.
• Confirm the doors close and seal fully.
• If you recently installed a filter, verify it is seated correctly and the cap is secure.
• If the unit is on a GFCI outlet and it trips, restore power and recheck cooling.

A reset clears minor control glitches after a power interruption, cleaning, or a filter/ice maker change. Setting controls back to a stable midpoint helps the sealed system and fans run normally while temperatures recover.

Last updated: January 2026

On Kenmore Elite refrigerator model 10644423601, the display code is commonly shown as Er FF (sometimes written as ER FF). It indicates a freezer evaporator fan (freezer fan) airflow problem; that fan pushes cold air through the freezer and into the fresh food section.

• Fresh food section warming up first
• Weak or no airflow from the refrigerator vents
• Fan noise changes (rattling, scraping) or no fan sound
• Frost or ice buildup on the freezer rear panel
• Ice production slowing as temperatures rise

• Reset power: Unplug for 5 minutes, then restore power.
• Confirm the door switch works: The fan often stops when the freezer door is open.
• Look for ice blockage: Heavy frost can prevent the fan from moving air.
• Listen for the fan: Scraping usually means ice contact or a damaged blade.
• Inspect wiring/connectors: Loose connections at the fan or control can trigger the code.

The evaporator fan is the refrigerator’s air mover. When airflow stops, the refrigerator compartment warms quickly, food temperatures become unsafe, and the compressor can run longer than normal.

For the exact code wording and the model-specific troubleshooting flow, follow the steps in the 10644423601 owner’s manual.

Last updated: January 2026