Kenmore 11027831600 washer Parts

Kenmore washer model 11027831600 is a Whirlpool-built, top-load direct-drive style washer; models in this family are typically about 3.2 to 3.5 cu. ft. capacity. For the exact rated capacity for your specific unit, we recommend confirming it in the 11027831600 owner's manual.

Capacity is usually listed in the specifications section of the manual or on the model and serial tag. Use these quick checks:

• Check the specifications section in the 11027831600 owner's manual
• Look for a model and serial tag (commonly under the lid or on the cabinet opening)
• Compare your washer’s tub size and basket style to similar Kenmore 110 top-load models
• If you are measuring for laundry room fit, use the installation clearances in the 11027831600 installation guide

Most Kenmore 110-series top-load washers fall into a narrow range, but there are exceptions by design generation.

Knowing cubic feet helps us match the right cycle expectations and loading habits (comforters, towels, and bulky loads). It also helps when comparing replacement parts that relate to basket and drive components, such as the basket W10389328 or washer drain pump WP3363394.

Last updated: February 2026

To hard reset your Kenmore washer model 11027831600, unplug it (or switch off the breaker) for 1 minute, then restore power and start a normal cycle. This clears minor control glitches; if the washer still will not run, check lid-closure and drain issues next.

• Turn the Cycle Control knob to Off.
• Unplug the washer from the outlet (or turn off the circuit breaker).
• Wait 60 seconds.
• Restore power.
• Set a cycle and pull out the Cycle Control knob to start.

These checks solve the most common “won’t run” complaints on this style of Kenmore top-load washer.

• Make sure the lid is fully closed; a failed lid switch can prevent agitation or spin.
• If the tub is full of water, focus on draining first (a clog or weak pump can stop the cycle).
• If the washer drains but will not spin, redistribute the load and re-try a spin.
• If the washer agitates poorly, inspect the agitator drive parts.
• If you hear the motor but the basket does not move, the motor coupling is a common failure.

A hard reset clears temporary control interruptions, but it will not fix a mechanical problem like a worn coupling, a failed lid switch, or a weak drain pump. Using the correct start/stop method and basic checks helps you avoid repeat cycle stalls.

For model-specific operating steps (including how to stop and restart using the Cycle Control knob), use the 11027831600 washer manual.

Last updated: February 2026

Your Kenmore washer model number is printed on the appliance’s model and serial tag. For Kenmore model 11027831600, you will typically find that tag under the lid on a top-load washer, inside the door opening on a front-load washer, or on the back panel near the power cord.

Check these common locations first:

• Top-load washers: under the lid, around the tub opening
• Front-load washers: inside the door opening, along the door frame
• All styles: back panel, near the power cord entry or control console
• Sometimes: behind the control panel or on the cabinet side wall

Kenmore model numbers are usually 11 characters or more. Many Kenmore washers start with 110 followed by additional digits (for example, 11027831600).

Before you shop for parts or troubleshoot symptoms, we recommend:

• Write the model number exactly as shown (include all digits)
• Take a clear photo of the tag for reference
• Match the model number when selecting parts like a lid switch or drain pump
• Use the wiring and component locations shown in the 11027831600 owner’s manual

Kenmore washers can look similar across multiple series, but internal parts (lid switch assembly, motor coupling, agitator components, and drive system parts) can differ by model. Using the correct model number keeps repairs accurate and prevents returns.

Last updated: February 2026

On the Kenmore washer model 11027831600, the F9 E1 code means the washer is taking too long to drain (or is not draining). The most common causes are a clogged drain path, a kinked drain hose, or a failing drain pump.

• Unplug the washer for safety before touching hoses or wiring.
• Make sure the drain hose is not kinked, crushed, or pushed too far down into the standpipe.
• Confirm the standpipe or laundry tub drain is not clogged (a slow household drain can trigger drain-time errors).
• Check for a clog in the pump inlet or drain hose (coins, socks, lint, small items).
• If you hear the pump humming but water barely moves, the pump is typically blocked or worn.

For the correct drain-hose routing and securing method, follow the steps in the 11027831600 installation guide.

If the drain path is clear and the washer still will not drain, the drain pump is the most likely repair.

Model-matched part to consider: washer drain pump WP3363394.

A drain-time error can stop the cycle before spin, leaving clothes soaking wet and putting extra strain on the drive system. Fixing the drain restriction early helps prevent repeat errors and reduces the chance of water backing up or leaking.

For additional operating and troubleshooting tips specific to this washer, use the 11027831600 owner's manual.

Last updated: February 2026

A Kenmore washer like model 11027831600 typically lasts 10 to 15 years with normal household use. How long yours runs depends most on load size, installation conditions (level floor, proper drain), and routine care outlined in the 11027831600 owner's manual.

Most top-load washers in this class reach the 10 to 15 year range; heavy use and poor installation shorten that timeline.

• Load habits: frequent overloading strains the drive system and suspension
• Drain and fill conditions: slow draining or low water pressure increases cycle stress
• Installation: an unlevel floor increases vibration and wear
• Environment: freezing temperatures can damage components if not winterized
• Maintenance: cleaning and periodic checks reduce premature failures

These symptoms often point to wear in common mechanical parts (not just a one-time glitch):

• Agitation is weak or stops mid-cycle
• Spin is noisy, slow, or the tub bangs excessively
• Water will not drain consistently
• Burning smell or repeated tripped breaker
• Leaks from the tub area or underneath

Knowing the typical lifespan helps you decide whether to invest in parts and labor or plan for replacement. If your 11027831600 is already in the 10 to 15 year window and showing multiple symptoms, focusing on the most likely wear items first saves time and cost.

Last updated: February 2026