Craftsman 917292490 tiller Parts

For your Craftsman front-tine tiller model 917292490, we recommend buying replacement parts using the exact model number so you get the right fit (especially for wear items like belts and tines). You can order genuine-fit parts through Sears PartsDirect and other authorized retailers; always match the part number to your model’s parts list.

Best ways to buy the correct part

• Use the model number 917292490 when searching for parts
• Cross-check the part name and part number in the 917292490 owner's manual
• Replace common wear items proactively (belts, tines, spark plug, air filter)
• For hardware and clips, match size and application exactly (retainers, bolts, nuts)
• If you are unsure between similar items, compare your old part’s markings to the listing

Common Craftsman tiller parts people replace

These are frequent maintenance and drive items for this model family:

Part type	What it affects	Example from available parts for 917292490
Drive belt	Tines and/or wheel drive engagement	Husqvarna tiller drive belt 532133035
Reverse belt	Reverse operation (if equipped)	Tiller reverse drive belt 599385301
Idler pulley	Belt tension and engagement	Idler pulley 532161806
Control/cable parts	Engagement feel and response	Control lever 584447601

Why it matters

Tillers use several expendable parts that wear during normal use (belts and tines are common). Ordering by model number and confirming against the parts list helps prevent fit issues and reduces downtime during the season.

Last updated: February 2026

On a Craftsman tiller, the model number is typically on an ID label attached to the engine area or handle/control panel. For model 917292490, use the locations shown in the 917292490 owner's manual to match the label format and confirm you have the correct parts list.

Most common places to check

Look for a sticker or metal tag; wipe off dirt and oil so the numbers are readable.

• On or near the recoil starter housing (pull-start area)
• Under the engine shroud (sheet metal cover) near the muffler
• Near the spark plug area on the engine
• On the handle column or control panel area
• On the frame near the transmission or tine shield

What the model number looks like

For this Craftsman front-tine tiller, the model number is a 9-digit format:

Item	Example for this tiller	Why it matters
Tiller model number	917292490	Ensures diagrams and part fit are correct
Engine model/type	Briggs & Stratton engine numbers	Used for engine-specific parts like carburetor kits and gaskets

Tips to read the label correctly

• Copy the full number exactly; do not drop digits.
• If the label is faded, use a flashlight at an angle to make stamped text stand out.
• If you see both a tiller model and an engine model, use the tiller model (917292490) for chassis parts (belts, pulleys, tines, depth stake).

Why it matters

Craftsman tillers often share similar frames across model families, but belts, pulleys, and control parts can vary by model. Using 917292490 helps us match the correct diagrams and parts, such as the tiller reverse drive belt 599385301 or husqvarna tiller drive belt 532133035.

Last updated: February 2026

Craftsman tillers are built for the Craftsman brand by different manufacturers depending on the model and production run. For Craftsman model 917292490, the most reliable way to identify the builder and the correct service information is to use the model and product identification details shown in the 917292490 owner's manual.

How we identify the builder for a specific Craftsman tiller

Craftsman used multiple OEMs over the years, so we match the tiller by its exact model and ID information rather than relying on a model prefix alone.

• Confirm the full model number on the ID tag: 917292490
• Record any additional ID information on the tag (often a product number or serial)
• Use the illustrated parts list in the manual to match major assemblies (tines, belt guard, controls)
• Order parts by the exact model number to avoid look-alike mismatches
• Use the manual’s maintenance and adjustment procedures for that model

What we can confirm for model 917292490

The manual for Craftsman 917292490 identifies the machine type and key operating specs.

Specification	917292490 (from manual)
Tiller type	Front tine tiller with reverse
Tine width	26 inch
Engine rating	6.0 HP
Fuel capacity	3 quarts, unleaded regular

Why it matters

Knowing the exact model and matching it to the correct documentation prevents wrong-part orders and incorrect adjustments. This is especially important for wear items and drive components.

Common examples on this model include:

• Drive belts such as the husqvarna tiller drive belt 532133035
• Controls such as the control lever 584447601
• Pulleys and idlers that affect belt routing and tension

Last updated: February 2026