Kenmore 11027831600 washer Parts

Kenmore washer model 11027831600 is a Whirlpool-built, top-load direct-drive style washer; models in this family are typically about 3.2 to 3.5 cu. ft. capacity. For the exact rated capacity for your specific unit, we recommend confirming it in the 11027831600 owner's manual.

How to confirm the exact capacity

Capacity is usually listed in the specifications section of the manual or on the model and serial tag. Use these quick checks:

• Check the specifications section in the 11027831600 owner's manual
• Look for a model and serial tag (commonly under the lid or on the cabinet opening)
• Compare your washer’s tub size and basket style to similar Kenmore 110 top-load models
• If you are measuring for laundry room fit, use the installation clearances in the 11027831600 installation guide

Typical capacity range for Kenmore 110 top-load washers

Most Kenmore 110-series top-load washers fall into a narrow range, but there are exceptions by design generation.

Washer type (Kenmore 110 family)	Typical capacity (cu. ft.)	What you will notice
Standard top-load, direct-drive	3.2 to 3.5	Traditional deep-fill wash action
Larger-capacity top-load variants	3.6 to 4.0+	Taller or wider basket, more bulky-item room

Why it matters

Knowing cubic feet helps us match the right cycle expectations and loading habits (comforters, towels, and bulky loads). It also helps when comparing replacement parts that relate to basket and drive components, such as the basket W10389328 or washer drain pump WP3363394.

Last updated: February 2026

To hard reset your Kenmore washer model 11027831600, unplug it (or switch off the breaker) for 1 minute, then restore power and start a normal cycle. This clears minor control glitches; if the washer still will not run, check lid-closure and drain issues next.

Hard reset steps (power reset)

• Turn the Cycle Control knob to Off.
• Unplug the washer from the outlet (or turn off the circuit breaker).
• Wait 60 seconds.
• Restore power.
• Set a cycle and pull out the Cycle Control knob to start.

If it still will not start or stops mid-cycle

These checks solve the most common “won’t run” complaints on this style of Kenmore top-load washer.

• Make sure the lid is fully closed; a failed lid switch can prevent agitation or spin.
• If the tub is full of water, focus on draining first (a clog or weak pump can stop the cycle).
• If the washer drains but will not spin, redistribute the load and re-try a spin.
• If the washer agitates poorly, inspect the agitator drive parts.
• If you hear the motor but the basket does not move, the motor coupling is a common failure.

Quick symptom-to-part guide

Symptom after reset	Most likely area to check	Example part for this model
Won’t run/spin with lid closed	Lid safety circuit	Washer lid switch assembly WP8318084
Won’t drain or drains slowly	Drain pump, hose, clogs	Washer drain pump WP3363394
Motor runs but no agitation/spin	Drive connection	Coupling 285753A
Agitator “ratchets” or won’t move clothes well	Agitator dogs	Agitator dog 80040

Why it matters

A hard reset clears temporary control interruptions, but it will not fix a mechanical problem like a worn coupling, a failed lid switch, or a weak drain pump. Using the correct start/stop method and basic checks helps you avoid repeat cycle stalls.

For model-specific operating steps (including how to stop and restart using the Cycle Control knob), use the 11027831600 washer manual.

Last updated: February 2026

Your Kenmore washer model number is printed on the appliance’s model and serial tag. For Kenmore model 11027831600, you will typically find that tag under the lid on a top-load washer, inside the door opening on a front-load washer, or on the back panel near the power cord.

Where to look on Kenmore washers

Check these common locations first:

• Top-load washers: under the lid, around the tub opening
• Front-load washers: inside the door opening, along the door frame
• All styles: back panel, near the power cord entry or control console
• Sometimes: behind the control panel or on the cabinet side wall

What the model number looks like

Kenmore model numbers are usually 11 characters or more. Many Kenmore washers start with 110 followed by additional digits (for example, 11027831600).

What you see on the tag	What it’s used for	Why it matters
Model number	Identifies the exact washer design	Ensures parts diagrams match your washer
Serial number	Identifies production run	Helps confirm compatible revisions

Tips to avoid ordering the wrong part

Before you shop for parts or troubleshoot symptoms, we recommend:

• Write the model number exactly as shown (include all digits)
• Take a clear photo of the tag for reference
• Match the model number when selecting parts like a lid switch or drain pump
• Use the wiring and component locations shown in the 11027831600 owner’s manual

Why it matters

Kenmore washers can look similar across multiple series, but internal parts (lid switch assembly, motor coupling, agitator components, and drive system parts) can differ by model. Using the correct model number keeps repairs accurate and prevents returns.

Last updated: February 2026

On the Kenmore washer model 11027831600, the F9 E1 code means the washer is taking too long to drain (or is not draining). The most common causes are a clogged drain path, a kinked drain hose, or a failing drain pump.

What to check first (fast drain fixes)

• Unplug the washer for safety before touching hoses or wiring.
• Make sure the drain hose is not kinked, crushed, or pushed too far down into the standpipe.
• Confirm the standpipe or laundry tub drain is not clogged (a slow household drain can trigger drain-time errors).
• Check for a clog in the pump inlet or drain hose (coins, socks, lint, small items).
• If you hear the pump humming but water barely moves, the pump is typically blocked or worn.

For the correct drain-hose routing and securing method, follow the steps in the 11027831600 installation guide.

Parts that commonly solve an F9 E1 drain problem

If the drain path is clear and the washer still will not drain, the drain pump is the most likely repair.

Symptom	Most likely cause	Common fix
Won’t drain at all, pump silent	No power to pump, failed pump	Test wiring, replace pump if failed
Hums but drains slowly	Pump jam or worn impeller	Clear blockage or replace pump
Drains sometimes, then stops	Intermittent pump or restriction	Inspect hoses, replace pump if intermittent

Model-matched part to consider: washer drain pump WP3363394.

Why it matters

A drain-time error can stop the cycle before spin, leaving clothes soaking wet and putting extra strain on the drive system. Fixing the drain restriction early helps prevent repeat errors and reduces the chance of water backing up or leaking.

For additional operating and troubleshooting tips specific to this washer, use the 11027831600 owner's manual.

Last updated: February 2026

A Kenmore washer like model 11027831600 typically lasts 10 to 15 years with normal household use. How long yours runs depends most on load size, installation conditions (level floor, proper drain), and routine care outlined in the 11027831600 owner's manual.

Typical lifespan and what changes it

Most top-load washers in this class reach the 10 to 15 year range; heavy use and poor installation shorten that timeline.

• Load habits: frequent overloading strains the drive system and suspension
• Drain and fill conditions: slow draining or low water pressure increases cycle stress
• Installation: an unlevel floor increases vibration and wear
• Environment: freezing temperatures can damage components if not winterized
• Maintenance: cleaning and periodic checks reduce premature failures

Signs it may be near end-of-life

These symptoms often point to wear in common mechanical parts (not just a one-time glitch):

• Agitation is weak or stops mid-cycle
• Spin is noisy, slow, or the tub bangs excessively
• Water will not drain consistently
• Burning smell or repeated tripped breaker
• Leaks from the tub area or underneath

Common wear items vs. major repairs

What you notice	Often a smaller repair	Often a bigger repair
Won’t agitate well	Agitator dog 80040	Drive components or gear case issues
Won’t drain	Drain pump or hose restriction	Wiring or motor-related problems
Loud spin or shaking	Suspension or balance issues	Basket, drive tube, or brake wear

Why it matters

Knowing the typical lifespan helps you decide whether to invest in parts and labor or plan for replacement. If your 11027831600 is already in the 10 to 15 year window and showing multiple symptoms, focusing on the most likely wear items first saves time and cost.

Last updated: February 2026