Owner’s manual
View engine
What model number is the Craftsman 247372180?
The model number for this Craftsman walk-behind gas lawn mower is 247372180. You will typically find it on the mower’s model and serial number label; use that exact number when ordering parts like a mulching blade or discharge chute.
Most Craftsman walk-behind mowers place the model/serial label in one of these spots:
- On the rear of the deck near the bagging opening (rear discharge area)
- On the top of the deck near the engine mounting area
- On the left or right side of the deck, above the wheel height adjuster
- On the rear skirt area (behind the engine)
For label location and identification details, check the 247372180 owner’s manual.
Craftsman model numbers can look similar, but parts can differ by deck style, handle hardware, and discharge setup. Using 247372180 helps match the correct items, such as:
- Mulching blade (21-in deck)
- Blade adapter
- Side chute deflector or discharge chute assembly
- Wheels and axle assemblies
- Zone control cable (operator presence control)
| Part type | Example part name | Example part number |
|---|---|---|
| Mulching blade | Craftsman Troybilt lawn mower 21-in deck mulching blade | 942-0741A |
| Blade adapter | MTD lawn mower blade adapter | 748-0376E |
| Zone control cable | MTD lawn mower zone control cable | 946-04661A |
- Match the model number (247372180) first
- Then match the part number from your parts diagram
- If your mower has been repaired before, compare the old part to the diagram (mounting holes, cable length, blade center shape)
Why it matters: A single digit difference in a mower model can change the deck housing, blade mounting, or discharge components, which leads to incorrect fit and poor cutting performance.
Last updated: February 2026
What year is a Craftsman 247372180 riding mower?
Craftsman model 247372180 is a gas walk-behind lawn mower, not a riding mower. The exact production year is typically tied to the mower’s serial number and date code; we use the identification steps in the 247372180 owner's manual to match the serial/date information to the correct year.
Look for the model and serial label on the mower deck or rear housing (location varies by build). Then record the details exactly.
- Find the model/serial tag on the deck, rear skirt area, or near the handle mounts
- Write down the serial number and any date code (letters and numbers matter)
- Compare the code format to the identification section in the manual
- If the label is damaged, clean it gently and take a clear photo before it fades further
- Keep the info with your maintenance records for future parts lookups
If you are unsure which type you have, these features separate them quickly.
| Feature | Walk-behind mower (247372180) | Riding mower |
|---|---|---|
| Operator position | You walk behind | You sit on a seat |
| Cutting deck | Integrated 21-in class deck | Larger deck under chassis |
| Drive system | Push/self-propel (varies) | Belt and pulley or hydrostatic |
| Typical ID label location | Deck or rear housing | Under seat or frame rail |
The build year affects parts compatibility (for example, handle hardware, discharge components, and deck items). Using the correct identification info helps us match the right Craftsman and MTD-style parts for your exact configuration.
These are common wear or fitment-sensitive items on walk-behind mowers; confirm by model/serial before ordering.
- Lawn mower discharge chute assembly 931-04486A (side discharge fit and mounting)
- Craftsman troybilt lawn mower 21-in deck mulching blade 942-0741A (blade style and center mount)
- Mtd lawn mower blade adapter 748-0376E (adapter must match crankshaft and blade)
- Wheels and axle assemblies (diameter and bore can vary)
Last updated: February 2026
What replacement parts are most commonly needed for the 247372180?
For the Craftsman 247372180 walk-behind mower, the most commonly replaced items are the cutting and discharge components, control/handle hardware, and wear parts around the wheels and deck. Use the diagrams in the 247372180 owner's manual to confirm which version your mower uses before ordering.
These are frequent wear or damage points on a 21-in deck mower like the 247372180:
- Blade and blade mounting parts (for cutting performance and vibration control)
- Discharge and mulching parts (for clippings flow and safety)
- Control cable and bail bar (for engine stop control and operator presence control)
- Wheels and axle components (for tracking and height consistency)
- Handle hardware (for folding, tightening, and stability)
Here are popular replacements that are already listed for Craftsman 247372180:
| What it affects | Part (model-matched) | Typical reason to replace |
|---|---|---|
| Cutting | Craftsman troybilt lawn mower 21-in deck mulching blade 942-0741A | Dull, bent, or nicked blade; poor cut quality |
| Blade mounting | Mtd lawn mower blade adapter 748-0376E | Stripped hub, wobble, vibration |
| Discharge safety | Mtd lawn mower side chute deflector 731-07486 | Cracked, missing, won’t stay closed |
| Mulching | Mtd lawn mower mulching plug assembly 987-02516A | Lost plug; poor mulching performance |
| Operator control | Mtd lawn mower zone control cable 946-04661A | Stretched/binding cable; won’t stop/run correctly |
- Match by model number 247372180, then verify the diagram location and callout
- Compare your old part’s shape, mounting holes, and length (especially cables and handles)
- Replace fasteners that are rusted or rounded off during the repair
- After blade work, check for vibration and re-torque hardware per the manual
Using the correct Craftsman and MTD-spec parts helps the mower cut evenly, discharge safely, and keep the zone control system working as designed. That reduces vibration, improves bagging or mulching, and prevents repeat failures.
Last updated: March 2026
