Kenmore 10658022800 side-by-side refrigerator Parts

For your Kenmore side-by-side refrigerator model 10658022800, the most reliable way to confirm cubic feet is to check the model and serial (rating) label inside the fresh food compartment; it typically lists capacity as “total volume” or “cu. ft.” If it is not shown, you can calculate an accurate estimate by measuring the interior.

• Check the rating label inside the refrigerator compartment (often on a side wall near the crisper area).
• Review the specifications section in the owner's manual.
• Measure the usable interior space and calculate cubic feet (best when the label is missing or unreadable).
• Use the model number 10658022800 when comparing specs across documentation.

1. Measure the inside of the fresh food section: height, width, depth (in inches).
2. Multiply: H x W x D = cubic inches.
3. Divide by 1728 to convert to cubic feet.
4. Repeat for the freezer section and add the two results for an estimated total.

Knowing cubic feet helps us match the right refrigerator parts and accessories (like shelves, bins, and a refrigerator water filter) and it also helps you compare storage capacity when planning food storage and airflow.

Last updated: February 2026

Most side-by-side refrigerators are about 30 to 36 inches wide, 67 to 70 inches tall, and 29 to 35 inches deep. For Kenmore model 10658022800, plan your opening around a 36-inch minimum cabinet cutout width, plus clearance for airflow and door swing (see the 10658022800 owner's manual).

Side-by-side sizes vary by brand and model, so we recommend using typical ranges for planning, then confirming clearances in the manual.

Even if the refrigerator fits the opening, it still needs space to breathe and to open the doors fully.

• Allow 1/2 inch of space on each side and at the top for ventilation.
• If installed next to a fixed wall, leave at least 2 inches on the wall side (door swing clearance).
• If your unit has an ice maker, allow extra space behind for the water line connection.
• If you want to remove crisper pans with the refrigerator against an extended wall, a wider opening can be needed.
• Measure the opening at the front and back; walls are often not perfectly square.

Tight installations can cause warm temperatures, noisy operation, and doors that do not open far enough to access bins and drawers. Proper clearance also helps prevent kinks in the water line that can affect the ice maker and water dispenser.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10658022800, the model number is printed on the appliance identification label (the same label that lists the serial number). You will typically find this label inside the fresh food compartment on a side wall or near the ceiling.

• Open the refrigerator (fresh food) door and check the left and right interior side walls
• Look near the top front of the compartment (ceiling area or upper side wall)
• Check behind or beside the crisper drawers (label is often above the crisper area)
• If you do not see it in the refrigerator section, check the freezer compartment side wall

For the exact label location and how the model and serial are formatted for your unit, use the owner's manual.

The ID label usually includes both a model number and a serial number. Record the model number exactly as shown (all digits) so you can match parts like a water filter, ice maker, or inlet valve.

Using the correct model number prevents ordering the wrong refrigerator parts (for example, a water filter cap, ice maker assembly, or door gasket) and helps ensure the part fits and functions correctly.

Last updated: February 2026