Owner’s manual
Error Codes
How to tell cubic feet of Kenmore refrigerator by model number?
For Kenmore model 10656832603, the model number alone usually does not state the exact cubic-foot capacity. The most reliable way is to look up the capacity in the product specifications section of the 10656832603 owner's manual, or estimate it by measuring the usable interior space and converting cubic inches to cubic feet.
- Check the specifications section in the 10656832603 owner's manual.
- Look for a rating label inside the fresh food compartment (often on a side wall or near the crisper area) that may list capacity.
- If you have the original sales paperwork, it often lists total capacity.
- Estimate capacity by measuring interior dimensions and converting.
- Empty the compartment enough to measure the usable interior space.
- Measure width x depth x height in inches for:
- Fresh food section
- Freezer section
- Multiply each section to get cubic inches.
- Add them together.
- Convert to cubic feet.
| What you have | What to do | Result |
|---|---|---|
| Cubic inches | Divide by 1,728 | Cubic feet |
| Inches (W x D x H) | Multiply to get cubic inches | Volume |
Example: 30 in x 18 in x 48 in = 25,920 cubic inches; 25,920 ÷ 1,728 = 15.0 cu ft (example only).
Kenmore model numbers (including 106-prefix models) identify the product line and configuration, but they are not a consistent “capacity decoder.” Two similar-looking model numbers can have different insulation thickness, shelf layouts, or dispenser features that change usable volume.
Knowing cubic feet helps you compare replacement refrigerators, choose the right storage accessories (bins, shelves, pans), and set realistic expectations for food storage space in a side-by-side layout.
Last updated: January 2026
What are the dimensions of a Kenmore refrigerator model 10656832603?
The exact height, width, and depth for Kenmore side-by-side refrigerator model 10656832603 are listed in the product specifications section of the 10656832603 owner's manual. For planning purposes, most Kenmore side-by-side refrigerators are roughly 32 to 36 inches wide, 65 to 71 inches tall, and 28 to 34 inches deep (depth varies most depending on handles).
Use a tape measure and record each dimension in inches; measure twice.
- Width: measure the widest point of the cabinet; then measure again including door handles if they stick out.
- Height: measure floor to top of cabinet; include hinge cover if it sits higher.
- Depth: measure from the back to the front edge; note whether you are including handles.
- Opening width: measure at the front and back of the cutout (walls are often out of square).
- Door swing: plan extra room so doors and bins can open fully.
The manual calls out ventilation and door-swing spacing that affects the real space you need.
| Planning item | What to allow | Why it matters |
|---|---|---|
| Side and top ventilation | 1/2 inch on each side and at the top | Helps airflow and cooling performance |
| Door swing next to a fixed wall | 2 inches minimum on each side (depending on model) | Prevents doors from binding and bins from hitting |
| Back space (if ice maker/water line) | Extra room for water line connections | Prevents kinks and leaks |
A refrigerator can match the cabinet opening but still be a poor fit if the doors cannot swing fully, the unit cannot ventilate, or the water line gets pinched. Planning for clearances prevents installation problems and cooling issues.
Last updated: January 2026
Where is the model number on a Kenmore side by side refrigerator?
On Kenmore side-by-side refrigerator model 10656832603, the model number is printed on the appliance identification label. We use that label to match the correct parts diagrams, water filter, and service information for your exact refrigerator.
Look for a paper or foil label in one of these spots:
- Inside the fresh food (refrigerator) compartment on a side wall
- Along the ceiling of the fresh food compartment near the light housing
- On the door frame (the vertical surface you see when you open the door)
- Behind the base grille area near the floor (less common, but possible)
- On the back exterior panel (usually easiest to see with a flashlight)
If you find multiple numbers, use the one labeled Model (not just Serial).
The ID label typically includes both a model number and a serial number.
| Item on label | What it’s used for | Example format |
|---|---|---|
| Model number | Identifies the exact design and parts list | 10656832603 |
| Serial number | Identifies production run and date info | Letters plus numbers |
Kenmore model numbers can look similar, but small differences change which parts fit. Using the exact model number helps us point you to the right refrigerator water filter, ice maker, door bins, and control parts without guesswork.
- Compare the model number on the label to the one you are shopping for: 10656832603
- Use the diagrams and procedures in the 10656832603 owner's manual
- If you are replacing the filter, confirm the correct filter style and replacement interval in how to replace the water filter in a Kenmore refrigerator
Last updated: January 2026
