Kenmore 41744102301 washer Parts

Your Kenmore washer model number is the ID we use to match the correct parts and documentation; for this washer, the model number format looks like 41744102301. On most Kenmore washers, you will find the model/serial tag inside the door opening (front-load) or under the lid (top-load). Confirm the exact characters against the 41744102301 owner's manual.

Check these common tag locations first (the tag is usually a sticker or metal plate):

• Front-load washers: inside the door opening, along the door frame
• Top-load washers: under the lid, around the tub opening
• Any style: on the rear panel near the power cord entry
• Any style: along the side of the cabinet behind the control panel area
• Stacked laundry centers: sometimes inside the service panel area

Kenmore washer model numbers are typically 10 to 12 characters and often start with a 3-digit prefix that helps identify the manufacturer family. For this page, the correct model to use for parts lookup is 41744102301.

Small character differences matter; we recommend copying the model number exactly.

• Write it down exactly as printed (including leading zeros)
• Photograph the tag so you can zoom in on characters
• Use the model number, not just “Kenmore front-load washer”
• If the tag is worn, clean it gently and use a flashlight at an angle
• Match parts by model number first, then confirm by part description

Kenmore washers share many similar-looking components (door lock, drain pump, inlet valve), but mounting points and electrical connectors can vary by model. Using the exact model number helps ensure the right fit and correct operation.

Last updated: February 2026

Yes, repairing a Kenmore washer is worth it when the fix restores reliable operation for less than the cost of replacement, especially for common wear items like a drain pump, door lock, or shocks. For Kenmore model 41744102301, we use the 41744102301 owner's manual to confirm safe service steps and operating checks.

Use these practical checkpoints before you spend money on parts or labor:

• Age and condition: If the tub, cabinet, and wiring are in good shape, repairs pay off.
• Type of failure: Single-part failures (drain, fill, door lock, vibration) are usually good repair candidates.
• Repeat breakdowns: Multiple recent failures point toward replacement.
• Safety and downtime: If the washer overheats or stops mid-cycle often, diagnose before running more loads.
• Total cost: Add parts + labor; compare to a comparable new front-load washer.

These are frequent, straightforward fixes for a Kenmore front-load washer like 41744102301:

A targeted repair prevents secondary damage. For example, continuing to run a washer that will not drain can strain the pump and leave standing water that causes odors; a vibration issue can loosen fasteners and stress the tub.

From the Kenmore documentation, we always treat these as non-negotiable basics:

• Disconnect power before any maintenance (OFF is not the same as unplugged).
• Keep hands out of the drum until all moving parts stop.
• If the motor overheats, it can stop and restart after a cool-down period.
• If you transport the washer, reinstall shipping hardware to prevent damage (see the 41744102301 installation guide).

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years. For the Kenmore 41744102301 front-load washer, you usually reach the longer end of that range when the unit is installed correctly, kept level, and maintained using the care steps in the 41744102301 owner's manual.

• Load size: Overloading strains the motor, bearings, and suspension.
• Leveling and vibration: An unlevel washer increases wear on shocks and tub components.
• Water quality and detergent use: Too much detergent can cause residue and odor that lead to extra cleaning cycles.
• Drain performance: Slow draining makes the pump work harder and can leave standing water.
• Door seal care: Keeping the boot area clean and dry reduces mildew and leaks.

• Wipe the door opening and gasket area dry after wash day.
• Run a monthly cleaning cycle (or a hot cycle) to reduce residue.
• Check pockets and remove coins, screws, and debris before washing.
• Keep the washer level and stable; re-check after moving it.
• Use the correct detergent type and amount for a front-load washer.

If your washer won’t start because the door will not secure, the door catch 131763256 is one of the model-specific parts that can be involved.

A washer that is kept level, drains freely, and is not overloaded runs cooler and smoother; that reduces stress on the motor, tub bearings, and suspension so you get the full expected service life.

Last updated: February 2026