How to identify a Kenmore washer model?
Your Kenmore washer model number is printed on the model and serial number plate on the machine. On Kenmore model 11028822790, that plate is typically located under the lid area or on the cabinet, and it is the key detail we use to match the correct washer parts and diagrams.
Where to look for the model number plate
Check these common locations first (the exact spot varies by washer style):
- Top-load washers: under the lid, around the tub opening, or on the underside of the lid
- Front-load washers: inside the door opening, around the door frame
- All styles: on the back panel, near the power cord exit, or near the control console
- Look for a sticker or metal plate labeled “Model” and “Serial”
What the model number looks like for Kenmore
Many Kenmore washers use a model format that starts with 110 followed by additional digits (like 11028822790). Write the full number exactly as shown so we can match the right part revisions.
Quick ID checklist
- Copy the entire model number (do not shorten it)
- Copy the serial number too (helps confirm production series)
- Take a clear photo of the plate before ordering parts
- Match the model number to the parts list before buying
Why it matters
Kenmore washers often have multiple versions that look similar but use different components (for example, a different drain pump, coupling, or agitator parts). Using the exact model number helps prevent ordering the wrong part and saves time on repairs.
Common parts you may match after you find the model number
Once you confirm the model number, you can quickly identify frequently replaced items for this washer, such as:
| Symptom | Part category to check | Example part on this model page |
|---|---|---|
| Won’t drain | Drain pump | Washer drain pump WP3363394 |
| Won’t spin or agitates poorly | Drive system | Coupling 285753A |
| Agitator “ratchets” or slips | Agitator components | Agitator dog 80040 |
For model/serial plate location details and operating information, use the owner's manual.
Last updated: February 2026
Is it worth repairing a Kenmore washing machine?
Yes, it’s usually worth repairing a Kenmore washer like model 11028822790 when the fix restores reliable washing and spinning for far less than replacing the machine. Many common failures on this style of top-load washer are straightforward part replacements and can extend service life significantly.
A practical way to decide
Use this quick checklist before you spend money:
- Confirm the symptom: no spin, no drain, won’t agitate, leaking, or loud noise.
- Estimate the repair scope: one worn part vs. multiple drivetrain or tub issues.
- Compare cost: parts plus labor vs. the cost of a comparable new washer.
- Consider condition: rusted cabinet, damaged basket, or recurring leaks reduce value.
- Check features you rely on: this washer has selectable water levels, temperatures, and multiple speeds (see the owner's manual).
Common repairs that are often worth it
On Kenmore direct-drive style top-load washers, these fixes are frequently cost-effective because they address high-wear items:
- Agitation problems: agitator dog 80040 and agitator cam 285748
- No agitation or no spin (motor runs): coupling 285753A
- Won’t drain or drains slowly: washer drain pump WP3363394
- Spin issues or burning smell: clutch 285785
- Basket wobble or out-of-balance: washer suspension spring WP63907
When replacement makes more sense
Some repairs can be more involved due to teardown time and the number of related parts.
| Situation | What it can point to | Typical direction |
|---|---|---|
| Loud grinding in spin, oil smell | Gearcase wear | Repair only if overall condition is excellent |
| Persistent tub leaks into base | Seal, bearing, tub gasket issues | Repair if caught early; replace if corrosion is advanced |
| Multiple symptoms at once | Several worn drive and tub components | Replacement often wins on total cost |
Why it matters
A targeted repair (like a drain pump, motor coupling, or agitator parts) can restore performance quickly and keep a proven Kenmore washer running. Bigger drivetrain or tub repairs can still be worthwhile, but the total cost and downtime rise fast.
Last updated: February 2026
What is the average lifespan of a Kenmore washer?
A Kenmore washer typically lasts 10 to 15 years. For the Kenmore 11028822790 (a classic top-load, agitator-style washer), consistent maintenance, correct loading, and keeping the washer level are the biggest factors in reaching the upper end of that range; see the 11028822790 owner's manual for model-specific care and operating guidance.
What affects washer lifespan the most
- Load size and frequency: frequent heavy loads shorten drive-system life.
- Overloading: strains the motor coupling, clutch, and gear case.
- Out-of-balance spinning: increases wear on suspension and tub components.
- Water quality and detergent use: excess suds and residue can cause odor and performance issues.
- Leveling and floor stability: reduces vibration and component fatigue.
Maintenance habits that help you get 10 to 15 years
- Keep loads evenly distributed around the agitator.
- Use the right water level for the load size (helps reduce strain and improves cleaning).
- Avoid washing single heavy items alone; add a few towels to balance.
- Periodically check fill and drain performance; slow draining can point to a pump or hose restriction.
- If agitation becomes weak or one-directional, inspect common wear items early.
Common wear parts that can extend service life
If performance drops, replacing a few high-wear parts often restores normal washing and spinning:
| Symptom | Common cause | Example part for this model |
|---|---|---|
| Agitator “ratchets” or won’t move clothes well | Worn agitator dogs | Agitator dog 80040 |
| Washer won’t spin or agitates poorly | Worn motor coupling | Coupling 285753A |
| Spins weakly or slips under load | Worn clutch | Clutch 285785 |
| Won’t drain or drains slowly | Failing drain pump or blockage | Washer drain pump WP3363394 |
Why it matters
Knowing the typical lifespan helps you decide when a repair is worth it. On a proven, mechanical top-load design like the Kenmore 11028822790, replacing a targeted part (such as a coupling, clutch, or drain pump) can often restore reliable operation and help you reach the full expected service life.
Last updated: February 2026





