Kenmore 2537480240F refrigerator Parts

Most Kenmore refrigerators average 12 to 15 years of service life with normal household use. For your Kenmore model 2537480240F, consistent temperatures, clean airflow, and good door sealing are the biggest factors that help it reach (or exceed) that range; see the 2537480240F owner's manual for model-specific care and operating guidance.

These are practical, real-world averages for residential units:

We see these issues reduce compressor and cooling-system life the most:

• Dirty condenser area restricting airflow and raising operating temperatures
• Door not sealing well, causing long run times and moisture buildup
• Freezer frost buildup from air leaks or defrost problems
• Overloading shelves and blocking air vents inside the refrigerator compartment
• Ice maker water issues (low flow, leaks, mineral buildup) on units with an ice maker

Use these habits to protect the sealed system, evaporator fan, and defrost system:

• Keep the refrigerator and freezer vents clear so cold air can circulate
• Set stable temps (most homes do best around 37°F fresh food, 0°F freezer)
• Clean dust from the condenser area periodically (more often with pets)
• Confirm doors close fully and the gasket is clean and flexible
• If you have an ice maker connected, keep the water supply steady and leak-free

A refrigerator that runs longer than it should (from poor airflow or air leaks) puts extra strain on the compressor and cooling components. Reducing run time is one of the simplest ways to extend the life of a Kenmore top-mount refrigerator.

Last updated: January 2026

On Kenmore model 2537480240F, the ER FF code points to an evaporator fan (freezer fan) problem. That fan moves cold air from the freezer into the fresh food section, so when it fails or is blocked, the refrigerator side often warms up.

• Power the refrigerator off for 5 minutes, then restore power to reset the control.
• Listen for the evaporator fan in the freezer; it should run when the compressor is running and the door switch is closed.
• Check for frost or ice buildup on the freezer back wall (a sign of airflow restriction).
• Make sure vents between freezer and refrigerator are not blocked by food packages.
• Confirm the doors seal fully; poor sealing can cause frost that interferes with airflow.

If you find heavy frost or a fan that cannot spin freely, these model-compatible parts are commonly related:

• Refrigerator evaporator fan blade 5308000010 (damaged blade can rub or stall)
• Refrigerator defrost bi-metal thermostat 5303918202 (can contribute to defrost issues and frost buildup)

The evaporator fan is what distributes freezer-made cold air to the refrigerator compartment. When airflow stops, temperatures rise, food spoils faster, and the compressor can run longer than normal.

For model-specific access steps, wiring notes, and airflow diagrams, follow the 2537480240F owner’s manual.

Last updated: January 2026

Kenmore is a brand name sold by Sears, and model 2537480240F is part of Kenmore’s 253 model prefix family, which is commonly associated with Frigidaire/Electrolux-built refrigerators. For confirmation details specific to your unit, check the model and serial label location shown in the 2537480240F owner's manual.

The most reliable way is to use the identification label inside the fresh food compartment.

• Open the refrigerator door and look inside the refrigerator compartment for the serial plate
• Write down the full model number (2537480240F) and the serial number
• Look for any additional codes or brand markings on the label
• Match the 253 prefix to the manufacturer code references used for Kenmore appliances

Kenmore model numbers often use a 3-digit prefix that points to the original manufacturer.

Knowing who built the refrigerator helps when you are troubleshooting cooling issues, ordering parts like a door gasket or evaporator fan components, or following service procedures that can vary by manufacturer design.

If you are troubleshooting and seeing a display or diagnostic issue on a Kenmore refrigerator family, use the Kenmore 253 series french door refrigerator error codes guide as a reference point for Kenmore 253-series diagnostics (even though your 2537480240F is a top-mount design).

Last updated: January 2026

Kenmore refrigerator model 2537480240F is a top-mount (top freezer) refrigerator; for the exact height, width, and depth for your specific unit, we recommend using the dimensions and clearance chart in the 2537480240F owner's manual. Most top-mount refrigerators in this class are about 30–33 inches wide, 65–67 inches tall, and 26–30 inches deep.

When planning a replacement or a new install, we measure both the refrigerator cabinet and the space around it.

• Cabinet width/height/depth (the box itself)
• Depth with doors closed (often deeper than the cabinet)
• Depth with doors open (for traffic flow)
• Door swing clearance (so bins and drawers open fully)
• Ventilation clearance (for proper cooling)

Use the manual for the exact numbers for model 2537480240F, then compare them to your opening.

• Measure width at the top, middle, and bottom of the opening.
• Measure height from the floor to the lowest obstruction (cabinet, molding).
• Measure depth from the wall to the front edge of surrounding cabinetry.
• If you have an ice maker, plan slack in the water line; the manual notes allowing about 7 feet of extra tubing so the refrigerator can be pulled out for cleaning.

Correct sizing protects airflow, helps the doors seal, and prevents warm temperatures and moisture problems caused by tight clearances or poor leveling.

Last updated: January 2026