Kenmore 11028133410 washer Parts

Kenmore washer model numbers (including 11028133410) are structured so the first three digits identify the manufacturer, the next set identifies the base design, and the remaining digits show feature or production variations. For parts matching, we always recommend confirming the full model and serial from the unit label and the 11028133410 owner's manual.

Most Kenmore model numbers follow this pattern:

• Prefix (first 3 digits): manufacturer identifier (example: 110)
• Middle digits: base model platform or series
• Ending digits: version, color, feature package, or production change

For the most accurate parts lookup, we use the model number exactly as printed on the appliance label.

• Check the lid opening area on top-load washers (often under the lid)
• Look for a label that lists Model and Serial
• Write the number exactly, including all digits
• Use the serial number too when ordering parts that can vary by production run

Kenmore washers can share a similar “base” model but use different components depending on the variation digits. Using the full model number helps us match the correct lid lock, water inlet valve, drive parts, and control components the first time.

If you are diagnosing a symptom or code, the Kenmore 110 vmw top load washer error codes guide is a fast way to narrow the likely failed system (drain, fill, lid lock, or drive).

Last updated: January 2026

A Kenmore washer typically lasts 10 to 15 years with normal household use. For Kenmore model 11028133410 (a top-loading high efficiency, low-water washer), consistent HE detergent use, correct loading, and basic upkeep help you reach the higher end of that range; see the 11028133410 use and care guide.

Most Kenmore washers fall into these real-world averages:

We see these issues reduce lifespan more than anything else:

• Overloading the basket (extra strain on drive and suspension)
• Using non-HE detergent or too much detergent (residue, odors, poor rinsing)
• Running unbalanced loads repeatedly (vibration, tub and suspension wear)
• Ignoring slow fills or weak water flow (long cycles, valve stress)
• Letting small leaks continue (corrosion and electrical damage)

If performance changes as the washer ages, these are common repair areas on this platform:

• Lid not locking or cycle not starting: washer lid lock assembly W10810403
• Slow fill, no fill, or fill errors: washer water inlet valve W11165546
• Excessive shaking or banging: suspension/damper components
• Poor agitation or spin performance: clutch/drive components

Knowing the typical lifespan helps you decide whether to repair or replace. If your 11028133410 is under about 10 years old, repairs like a lid lock or inlet valve are often cost-effective; past 12 to 15 years, multiple major issues usually point toward replacement planning.

Last updated: January 2026

Kenmore washer model 11028133410 is a top-loading high efficiency, low-water washer; the exact tub capacity (in cubic feet) is listed in the product specifications section of the 11028133410 use and care guide. If you are planning load sizes, most HE top-load washers in this class handle a typical family load comfortably.

We recommend using the specifications section in the manual so you get the precise number for your exact model.

• Look for “Capacity” or “Washer capacity” in the specs/features pages
• If the manual lists a model series (for example 110.2813*410), match it to 11028133410
• Use the capacity to choose the right cycle, water level behavior, and HE detergent amount
• If you are comparing to an older deep-fill washer, expect lower water levels by design

Capacity is helpful, but real-world loading depends on fabric type and how freely items can move.

Using the correct capacity helps prevent poor cleaning, out-of-balance spinning, and extra wear on drive components like the clutch and washplate. If you are seeing balance issues, checking suspension parts such as the damper assembly W11130356 can also be part of the fix.

Last updated: January 2026

For Kenmore model 11028133410, the washer is a Kenmore-branded unit built on a Whirlpool-manufactured platform (the 110 model prefix is commonly associated with Whirlpool-built Kenmore washers). For model-specific details like features and service information, use the 11028133410 use & care guide.

We recommend using the model number and the product ID tag on the cabinet to confirm the manufacturing source and parts platform.

• Check the full model number on the washer’s ID tag (use the complete number, not just “80 Series”).
• Look for the 110 prefix; it typically indicates a Whirlpool-built Kenmore platform.
• Match the model to the documentation and parts diagrams to confirm the correct design family.
• Use the parts list to verify common Whirlpool-style components (lid lock, inlet valve, drive parts).
• If you are ordering parts, always match by model number first to avoid fit issues.

Because this Kenmore 11028133410 is a top-loading high efficiency, low-water washer, many common repairs follow Whirlpool-style top-load procedures and part groupings.

Knowing the manufacturing platform helps you choose the right troubleshooting steps and compatible parts (for example, lid lock, water inlet valve, and drive system components) so the washer fills, agitates, drains, and spins correctly.

Last updated: January 2026