Kenmore 58714439200 dishwasher Parts

Yes. We still carry replacement parts for many Kenmore dishwashers, including model 58714439200. The key is matching the exact model number and then ordering by the correct part number and description, which the manual recommends when requesting parts.

Use the model number from the serial plate (typically on the tub wall just inside the door), then confirm the part by name and number in the 58714439200 owner's manual.

• Match the full model number: 58714439200
• Identify the failed symptom (won’t drain, won’t fill, door won’t latch, leaks)
• Confirm the part name and part number before ordering
• Replace related small hardware when needed (clamps, screws, nuts)
• Keep your old part until the repair is complete for side-by-side comparison

These are examples of parts we show for this model that cover frequent repairs:

Kenmore dishwashers were built across multiple platforms, so “Kenmore dishwasher parts” is not specific enough. Using the exact model number and the correct part number prevents wrong-part returns and helps the repair go smoothly.

Last updated: February 2026

On Kenmore dishwasher model 58714439200, the lower spray arm installs onto the center wash tower hub and is secured with the spray arm locknut. After reinstalling, the spray arm must rotate freely so water can spray correctly during the wash cycle (see the 58714439200 owner's manual).

• Turn off power to the dishwasher at the breaker.
• Pull out the bottom rack for access.
• If removed, reinstall the center wash tower base first (it threads on and tightens by turning clockwise after seating).
• Set the lower spray arm onto its mounting hub.
• Install the locknut and tighten it securely (snug, not forced).
• Spin the spray arm by hand; it should rotate freely without rubbing.

If the arm does not spin freely, cleaning and re-seating usually fixes it.

• Make sure no utensils or pan handles hang through the bottom rack and block rotation.
• Confirm the center area of the lower rack is not blocked (the wash tower extends through this area).
• Clean out spray arm holes if you see debris.
• Check the pump opening area for objects (bones, fruit pits) that can interfere with flow.

The 58714439200 cleans by pumping water through the rotating spray arm and center wash tower. If the lower spray arm is loose, clogged, or blocked, you will get poor wash performance and leftover soil.

Last updated: February 2026

For a Kenmore dishwasher model 58714439200, repairing is worth it when the problem is a common wear item (leak, won’t drain, won’t fill, door won’t latch) and the fix is a part-level repair. Replacement makes more sense when multiple major systems are failing at once.

• If the dishwasher is under ~10 years old, repairs usually make sense.
• If the issue is one clear symptom (leak, no drain, no fill), repair is usually cost-effective.
• If you see repeated leaks, check seals and hoses first.
• If the unit has electrical/control problems plus mechanical problems, replacement is often the better value.
• If you can DIY safely (power off), you save the most on labor.

These are typical, targeted fixes for this model family:

• Won’t drain or drains slowly: inspect/replace the hose 807117001.
• Won’t fill or fills inconsistently: test/replace the water valve 154637401.
• Overfills or won’t stop filling: check the float and replace the switch 154773201 if needed.
• Door won’t close or pops open: inspect the latch area and strike alignment.

A dishwasher that doesn’t fill, drain, or latch correctly can leave standing water (a small amount is normal for the seal), reduce cleaning performance, and increase the chance of leaks. Fixing the specific failed part restores normal wash action without replacing the whole appliance.

• Confirm the model number on the serial plate just inside the door.
• Review troubleshooting and safety steps in the 58714439200 owner’s manual.
• Disconnect electrical power before servicing; avoid touching the heating element during or right after use.

Last updated: February 2026